Relaxation dynamics of stretched polymer chains traced by shear induced Shish‐Kebab structure

We have developed a morphologic method to investigate the relaxation processing of the stretched polymer chains in melts, in which an atomic force microscope probe was used to shear the surface of an isotactic polypropylene melt to obtain the isolated shish‐kebab structure. We present the results of the time dependence of length of the isolated shish‐kebab structure and the stress dependence of the kebab density along the direction of shish in this paper. Our results demonstrate that the shear‐oriented polymer melts show the relaxation dynamics of worm‐like chain where the length deficit of the isolated shish‐kebab structure is scaled with the relaxation time as a power of 1/3. The melting behavior of shish‐kebab structure was also investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 907–914     

Why calcium inhibits magnesium-dependent enzyme phosphoserine phosphatase? A theoretical study

Mechanisms for the formation of the Schiff base from acetaldehyde and butylamine, glycine and phosphatidylethanolamine based on Dmol3/DFT calculations were realized. For the case of phosphatidylethanolamine, calculations were done under periodic boundary conditions, in an amine-phospholipid monolayer model with two molecules of phosphatidylethanolamine by cell. All models contained explicit aqueous solvent. In the three cases, a neutral amino group is used to model the nucleophilic attack on the carbonyl group of acetaldehyde, and water molecules form hydrogen bond networks. These networks were involved in the reactions by performing as proton-transfer carriers, important in some steps of reactions, and stabilizing reaction intermediates. In all the studied reactions, they take place in two steps, namely: (1) formation of a carbinolamine and (2) its dehydration to the Schiff base, being the dehydration the rate-determining step of the process, consistent with available experimental evidence for similar reactions. The main difference between the studied reactions is found in the value for relative free energy for the intermediates and transition states in the second step; these values are lower in the cases of glycine and phosphatidylethanolamine in comparison with butylamine, due the influence of their molecular environments. Based on the results, the aminophospholipid surface environment and carboxylic group of glycine may boost Schiff base formation via a neighboring catalyst effect.     

Synthesis and Herbicidal Activity of [(Substituted Phenoxyacetoxy) (Substituted Phenyl)Methyl](Methyl) Phosphinates Containing Fluorine

Abstract

A series of [(substituted phenoxyacetoxy)(substituted phenyl)methyl](methyl)phos- phinates containing fluorine were designed and synthesized. All the synthesized compounds were identified by elemental analysis, IR, ¹H NMR, mass spectrometry. O-methyl [(2-fluorophenoxyacetoxy)(2,4-dichlorophenyl)methyl](methyl)phosphinate was further analyzed by X-ray single-crystal diffraction. Their herbicidal activity against a set of weed species was examined. Some of the compounds showed potential herbicidal activity, which provided some indications for further studies on structure modification.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

New Cytotoxic Triterpenoids from the Aerial Parts of Euphorbia sieboldiana

Phytochemical investigation of the EtOH extract of Euphorbia sieboldiana led to the isolation of four new oleanane‐type triterpenoids, (1β,2α,3β,19β)‐1,2,3,19‐tetrahydroxyolean‐12‐en‐28‐oic acid, (1β,3β,19β)‐1,3,19‐trihydroxyolean‐12‐en‐28‐oic acid, (1β,2α,3β,16β,19β)‐1,2,3,16,19‐pentahydroxyolean‐12‐en‐28‐oic acid, and (1β,2α,3β,19β,23)‐1,2,3,19,23‐pentahydroxyolean‐12‐en‐28‐oic acid, along with 16 known compounds. Their structures were established by extensive 1D‐ and 2D‐NMR, as well as other spectral analyses. Biological evaluation of the four new triterpenoids revealed potent cytotoxic activities against HeLa and Hep‐G2 cells.     

双功能配体促进的钯催化不对称醚化和胺化反应（英文）

研究双亚砜膦配体(BiSO-P)亚砜基团的Bronsted碱性在协同催化反应中的作用.1H NMR研究表明双亚砜膦与醇和胺等质子试剂形成氢键;并将此类配体应用于钯催化的不对称醚化和胺化反应,最高获得99%ee.研究发现氢键的存在能有效提高反应的ee值,配体亚砜基团在反应过程中同时起着Lewis和Bronsted碱的作用.     

Pattern transition of two-dimensional Faraday waves at an extremely shallow depth

In this paper, we experimentally investigate the pattern transition of two-dimensional Faraday waves at an extremely shallow depth in a Hele-Shaw cell. Several patterns of Faraday waves are observed, which have some significant differences in wave profile, wave height and wave length. It is found that, in a wide range of the forcing frequency f, there always exists a region of the acceleration amplitude A, in which there exist the so-called hysteretic jumps between different patterns of Faraday waves. All of these experimental observations could enrich our knowledges about the Faraday waves and would be helpful to the further theoretical studies on the related topic in future.     

Thermal properties of chlorosulfonated polyethylene via gas–solid phase method

The thermal properties of chlorosulfonated polyethylene (CSM), which was prepared via gas–solid phase method, were studied in this article. The thermal curves were completely tested by differential thermal analysis, thermogravimetry, and differential thermogravimetry. The results showed that CSM 3550 and CSM 3570 prepared by gas–solid phase method had more excellent thermal properties (high initial/final temperature of degradation) than those via solution method, due to the uniform chlorine distribution of them in macromolecular chain. The differential scanning calorimetry curves showed that the transitions of CSM 3550 and CSM 3570 from glassy to the elastic state were also higher than those via solution method. Particularly, CSM 3570 was amorphous and no clear melting peak was observed during the melting process.     

Improved Crystallinity of Poly(3-hexylthiophene-2,5-diyl):[6,6]-Phenyl-C61 Butyric Acid Methyl Ester Film by Pulsed Electrospray Deposition

We investigated crystallinity parameters and ordering domains of poly(3-hexylthiophene-2,5-diyl) blended in [6,6]-phenyl-C₆₁-butyric acid methyl ester films, which were fabricated by pulsed electrospray deposition methods. The crystallinity parameter and the ordering domain were estimated from Raman and optical absorption spectra, respectively. As a result, they were improved with decreasing the off time of pulse voltage, corresponding to the slow evaporation speed of solvent. In addition, both the space-charge limited current mobility and the photoconversion efficiency showed same trend. A highest photoconversion efficiency of 1.11 % was achieved without the thermal annealing process after depositing the active layer.     

Design of a quad-stable piezoelectric energy harvester capable of programming the coordinates of equilibrium points

In this study, a novel quad-stable energy harvester (QEH) is developed, in which its coordinates of equilibrium points can be user-defined like programming. This programmable feature distinguishes the proposed QEH from all reported magnet-type or buckling-type vibration energy harvesters. It has the advantage that it is easy to develop a high-performance QEH by appropriately programming these coordinate points and customizing a personalized QEH for different vibration environments. The dynamic model is established by the Ritz method and the Lagrange equation. The analytical steady periodic response is obtained by the average method. When the excitation acceleration is 2 m/s², the peak power is 575 μW at 8.5 Hz. Also, the influence of the coordinate arrangement of the equilibrium points on the energy harvesting performance is studied. A formula that can quickly determine the equilibrium point coordinates is given, and the QEH designed according to this formula has superior performance. At last, the performance of the designed QEH is compared with other reported vibration energy harvesters. It shows that the QEH has a high average output power (287 μW), high normalized power density (59.8 μW/cm³/g²), and wide operating frequency range (8.4 Hz) among these harvesters.

     

Magnetron sputtering deposition of silicon nitride on polyimide separator for high-temperature lithium-ion batteries

To date,lithium-ion batteries are becoming increasingly significant in the application of portable devices and electrical vehicles,and revolutionary progress in theoretical research and industrial application has been achieved.However,the commercial polyolefin separators with unsatisfying electrolytes affinity and poor thermal stability have extremely restricted the further application of lithium-ion batteries,especially in the high-temperature fields.In this work,magnetron sputtering deposition technique is employed to modify the commercial polyimide separator by coating silicon nitride on both sides.Magnetron sputtering deposition modified polyimide(MSD-PI)composite separator shows high thermal stability and ionic conductivity.More importantly,compared with the cells using Celgard separator,the cells with MSD-PI separator exhibit superior electrochemical performance,especially long-term cycle performance under high temperature environment,owing to the high thermal conductivity of surface Si3 N4 particles.Hence,lithium-ion batteries with MSD-PI separator are capable of improving thermal safety and capacity retention,which demonstrates that magnetron sputtering deposition technique could be regarded as a promising strategy to develop advanced organic/inorganic composite separators for high-temperature lithium-ion batteries.