Heteroleptic ruthenium complexes containing uncommon 5,5'-disubstituted-2,2'-bipyridine chromophores for dye-sensitized solar cells

Four new heteroleptic ruthenium sensitizers [Ru(4,4'-carboxylic acid-2,2'-bipyridine)(L)(NCS)(2)] (L = 5,5'-bis(4-octylthiophen-2-yl)-2,2'-bipyridine (1), 5,5'-bis(N,N-diphenyl-4-aminophenyl)-2,2'-bipyridine (2), 5,5'-bis(5-(N,N-diphenyl-4-aminophenyl)-thiophen-2-yl)-2,2'-bipyridine (3) and 5,5'-bis(4-octyl-5-(N,N-diphenyl-4-aminophenyl)-thiophen-2-yl)-2,2'-bipyridine (4)) were synthesized, characterized by physicochemical and computational methods, and utilized as photosensitizers in nanocrystalline dye-sensitized solar cells (DSSCs). The λ(max) of the metal-to-ligand charge transfer (MLCT) absorption of these four ruthenium dyes (527 nm for 1, 535 nm for 2, 585 nm for 3 and 553 nm for 4) can be tuned by various structural modifications of the ancillary ligand and it was shown that increasing the conjugation length of such ligand reduces the energy as well as the molar absorption coefficient of the MLCT band. The maximum incident photon to current conversion efficiency (IPCE) of 41.4% at 550 nm, 38.6% at 480 nm, 39.4% at 470 nm and 31.1% at 480 nm for 1-, 2-, 3- and 4-sensitized solar cells were obtained. Respectable power conversion efficiencies of 3.00%, 2.51%, 2.00% and 2.03% were realized, respectively, when the sensitizers 1, 2, 3 and 4 were used in DSSCs under the standard air mass (AM) 1.5 sunlight illumination (versus 5.9% for standard N719).     

Pumping-induced perturbation of flow in microfluidic channels and its implications for on-chip cell culture

We study the rate of response to changes in the rate of flow and the perturbations in flow in polydimethylsiloxane (PDMS) microfluidic chips that are subjected to several common flow-control systems. We find that the flow rate of liquid delivered from a syringe pump equipped with a glass syringe responds faster to the changes in the conditions of flow than the same liquid delivered from a plastic syringe; and the rate of flow delivered from compressed air responds faster than that from a glass syringe. We discover that the rate of flow that is driven by a syringe pump and regulated by an integrated pneumatic valve responds even faster, but this flow-control method is characterized by large perturbations. We also examine the possible effects of these large perturbations on NIH 3T3 cells in microfluidic channels and find that they could cause the detachment of NIH 3T3 cells in the microchannels.     

新型含金属元素二胺的合成与表征

本文分别用液相法和固相法合成了一系列含不同金属元素的二胺,并通过红外光谱,~1HNMR、~(13)CNMR,紫外光谱,电化学分析及元素分析对其进行表征,还通过DSC和TG对其热性能进行了研究,结果发现这些二胺具有良好的耐热性,是合成一些耐热高聚物的优良原料.     

Preparation of phosphinated bisphenol from acid‐fragmentation of 1,1,1‐tris(4‐hydroxyphenyl)ethane and its application in high‐performance cyanate esters

We reveal a route for the preparation of phosphinated bisphenol, 1,1‐bis(4‐hydroxyphenyl)‐1‐(6‐oxido‐6H‐dibenz <c,e> <1,2> oxaphosphorin‐6‐yl)ethane (2) , via a one‐pot reaction of 1,1,1‐tris(4‐hydroxyphenyl)ethane and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide (DOPO) in the catalysis of p‐toluenesulfonic acid. A two‐step reaction mechanism, acid‐fragmentation of 1,1,1‐tris(4‐hydroxyphenyl)ethane followed by nucleophilic addition of DOPO, is proposed for the synthesis. Based on (2) , a dicyanate ester derivative, 1,1‐bis(4‐cyanatophenyl)‐1‐(6‐oxido‐6H‐dibenz <c,e> <1,2> oxaphosphorin‐6‐yl)ethane (3) was prepared and co‐cured with a commercially available dicyanate ester, the dicyanate ester of bisphenol A (BACY). Experimental data show that incorporating (3) into BACY enhances the flame retardancy and dielectric properties with little penalty to the thermal properties. A thermoset with T_g 274 °C, coefficient of thermal expansion (CTE) 49 ppm/°C, D_k 3.04 (1 GHz), T_d (5%,) N₂: 435 °C, air: 424 °C, and UL‐94 V‐0 rating can be achieved via this approach. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Unsaturated polyester resins modified with phosphorus-containing groups: Effects on thermal properties and flammability

A novel reactive phosphorus-containing monomer [1-oxo-2,6,7-trioxa-1- phosphabicyclo-[2.2.2]octane-methyl diallyl phosphate, PDAP] was synthesized, and various amounts of PDAP were combined with unsaturated polyester by radical bulk polymerization. The resulting flame-retardant unsaturated polyester resin (FR-UPR) samples were investigated by thermogravimetric analysis (TGA), microscale combustion calorimetry (MCC), and limiting oxygen index (LOI) tests. Due to the relatively high phosphorus content of PDAP (18.2 wt%), incorporation of this monomer into unsaturated polyester resin (UPR) led to a marked decrease in the heat release capacity (HRC), the total heat release (THR), an increase in the LOI and the char yield upon combustion. In order to elaborate the interactions between the UPR and PDAP in degradation, differences between the experimental and theoretical mass losses of a FR-UPR sample were evaluated. Furthermore, thermogravimetry-Fourier transform infrared (TG-FTIR) and real-time Fourier transform infrared (RTIR) spectroscopy were employed to investigate the degradation behavior of UPRs, providing insight into the degradation mechanism.     

Natural deep eutectic solvents as new potential media for green technology

Developing new green solvents is one of the key subjects in Green Chemistry. Ionic liquids (ILs) and deep eutectic solvents, thus, have been paid great attention to replace current harsh organic solvents and have been applied to many chemical processing such as extraction and synthesis. However, current ionic liquids and deep eutectic solvents have still limitations to be applied to a real chemical industry due to toxicity against human and environment and high cost of ILs and solid state of most deep eutectic solvents at room temperature. Recently we discovered that many plant abundant primary metabolites changed their state from solid to liquid when they were mixed in proper ratio. This finding made us hypothesize that natural deep eutectic solvents (NADES) play a role as alternative media to water in living organisms and tested a wide range of natural products, which resulted in discovery of over 100 NADES from nature. In order to prove deep eutectic feature the interaction between the molecules was investigated by nuclear magnetic resonance spectroscopy. All the tested NADES show clear hydrogen bonding between components. As next step physical properties of NADES such as water activity, density, viscosity, polarity and thermal properties were measured as well as the effect of water on the physical properties. In the last stage the novel NADES were applied to the solubilization of wide range of biomolecules such as non-water soluble bioactive natural products, gluten, starch, and DNA. In most cases the solubility of the biomolecules evaluated in this study was greatly higher than water. Based on the results the novel NADES may be expected as potential green solvents at room temperature in diverse fields of chemistry.     

表面等离子体共振传感器在癌症早期诊断中的应用

表面等离子体共振传感器作为一种新型光学传感器, 在疾病诊断领域展现出日益广泛的应用性. 借助于纳米材料研究的最新进展, 该传感技术可实现浓度极低生物标记物的有效检测. 我们针对表面等离子体传感器在癌症早期诊断中的应用, 介绍了最新研究进展、重要发现及未来的发展前景.     

Determination of Sulfide by Hematoxylin Multiwalled Carbon Nanotubes Modified Carbon Paste Electrode

This study investigates a new approach for the amperometric determination of sulfide using a hematoxylin multiwalled carbon nanotubes modified carbon paste electrode (HM‐MWCNTs/CPE). The experimental results show that HM‐MWCNTs/CPE significantly enhances the electrocatalytic activity towards sulfide oxidation. Cyclic voltammetric studies show that the peak potential of sulfide shifted from +400 mV at unmodified CPE to +175 mV at HM‐MWCNTs/CPE. The currents obtained from amperometric measurements at optimum conditions were linearly correlated with the concentration of sulfide. The calibration curve was obtained for sulfide concentrations in the range of 0.5–150×10^?6 mol L^?1. The detection limit was found to be 0.2×10^?6 mol L^?1 for the amperometric method. The proposed method was successfully applied to a river water sample in Pardubice, Czech Republic.     

Synthesis and Photocatalytic Properties of Nano‐crystalline In2O3

A nano‐crystalline In₂O₃ was synthesized using calcinations methods and was used as a photocatalyst to degrade sulfan blue (SB) dye. In addition, this study addresses the conditions of the degradation and the factors that influenced the catalysis. In₂O₃ was prepared by calcining In(OH)₃ at heat ranges of 100–700 °C for 24 h. The In₂O₃ was characterized using field emission scanning electron microscopy (FE‐SEM), an X‐ray diffractometer (XRD), thermogravimetric analysis (TGA), and high‐resolution X‐ray photoelectron spectroscopy (HR‐XPS). The activities of these samples were tested for the photocatalytic degradation of SB dye. The results indicated that the In(OH)₃ that was calcined at 300 °C for 24 h had the best performance.