Stretchable Perovskite Solar Cells with Recoverable Performance

Perovskite solar cells (PSCs) are a promising photovoltaic technology for stretchable applications because of their flexible, light‐weight, and low‐cost characteristics. However, the fragility of crystals and poor crystallinity of perovskite on stretchable substrates results in performance loss. In fact, grain boundary defects are the “Achilles’ heel” of optoelectronic and mechanical stability. We incorporate a self‐healing polyurethane (s‐PU) with dynamic oxime–carbamate bonds as a scaffold into the perovskite films, which simultaneously enhances crystallinity and passivates the grain boundary of the perovskite films. The stretchable PSCs with s‐PU deliver a stabilized efficiency of 19.15 % with negligible hysteresis, which is comparable to the performance on rigid substrates. The PSCs can maintain over 90 % of their initial efficiency after 3000 hours in air because of their self‐encapsulating structure. Importantly, the self‐healing function of the s‐PU scaffold was verified in situ. The s‐PU can release mechanical stress and repair cracks at the grain boundary on multiple levels. The devices recover 88 % of their original efficiency after 1000 cycles at 20 % stretch. We believe that this ingenious growth strategy for crystalline semiconductors will facilitate development of flexible and stretchable electronics.     

多孔氧化铝模板催化制备定向碳纳米管阵列

Well-aligned open-ended multi-walled carbon nanotube (MWCNT) arrays were prepared via chemical vapor deposition (CVD) method in porous anodic aluminum oxide (AAO) templates without depositing any transition metals as catalyst. Effects of the CVD temperature and heat treatment were studied in detail.Well-aligned open-ended MWCNT arrays were obtained at the CVD temperature above 600 ℃; when CVD temperature is reduced to around 550 ℃, CNTs, CNFs and other structures existed at the same time; no CNTs or carbon nanofibres (CNFs) could be found as the CVD temperature is below 500 ℃, and only amorphous carbon in the porous AAO template was found. Experimental results showed that the AAO template is catalytic during the CVD process, and it has the following two effects: to catalyze thermal decomposition of acetylene and to catalyze conversion of carbon decomposed from acetylene into CNTs or CNFs. Heat treatment could improve the graphitization degree, but it might also introduce new defects.     

Output feedback regulation of time-delay nonlinear systems with unknown continuous output function and unknown growth rate

Nonlinear Dynamics - This paper is concerned with the global regulation via output feedback for the time-delay nonlinear systems with unknown continuous output function and unknown growth rate....     

有限群共轭类长度的一点注记

假设G=AB是子群A和B的互相置换积。通过A?B中元素的共轭类长度给出了群G的结构,推广了一些最近的结论。     

Rotational and rovibrational transitions in the a 1Δ2 and b 1Σ+0+ states of sulfur monoxide radical

ABSTRACT

Sulfur monoxide radical has widely been detected in outer space using ground-state spectroscopy. The a ¹Δ₂ and b ¹Σ⁺₀₊ states of this radical have low excitation energies, and they possibly exist in outer space. In this work, the potential energy curves and dipole moment functions of the two states were evaluated using the complete active space self- consistent field method, followed by the valence internally contracted multireference configuration interaction approach. The transition line positions, oscillator strengths, band transition dipole matrix elements, Einstein A coefficients, and Franck–Condon factors of all transitions were calculated for lower vibrational levels at rotational angular momentum quantum number J up to 150. The transition line positions calculated in this study are in good agreement with the experimental results. The rovibrational transition became noticeably weak at Δυ > 5. Comparing the results of a ¹Δ₂ and b ¹Σ⁺₀₊ states reported in this paper with the previous values, we conclude that these results are the most accurate and complete to date.     

Heat capacity and thermodynamic properties of 1-hexadecanol

Three different nitrocellulose (NC) samples produced from linters were investigated. DSC studies on the NC+sym-diethyldiphenylurea (C1) mixtures were carried out. The influence of storage time on their pore structures was examined using thermoporometry. The results led to conclusion that large pores are multiples of small ones. The parameter n was used to characterize the number of C1 molecules equivalent to NC ring. Its value for short storage time was about 9 but for longer time reached the value of 3. The influence of thermal history on the phase transition and porosity of the different nitrocellulose samples was different.     

A New Cationic Fluorescent Probe for HSO3− Based on Bisulfite Induced Aggregation Self-Assembly

In comparison with the numerous studies that have centered on developing molecular frameworks for the functionalization of fluorescent materials, less research has addressed the influence of the side chains, despite such appendages contributing significantly to the properties and applications of fluorescent materials. In this work, a new series of cationic fluorescent probes with AIE characteristics have been developed, which exhibit unique sensitivity for charge-diffusion anions, namely HSO₃⁻, via the interactions of ions and the cooperation of the controllable hydrophobicity. The impact of the alkyl chain length attached at the cationic probes suggested that the fluorescent intensity and sensitivity of the probes could be partially enhanced by adjusting their aggregation tendency through the action of the hydrophobic effect under aqueous conditions. DLS and SEM images indicated that different particle sizes and new morphologies of the probes were formed in the anion-recognition-triggered self-assembly process, which could be attributed to the composite effect of electrostatic actions, Van der Waals forces and π-π stacking.     

高中学业水平考试试题难度模型建构*

利用主成分分析方法厘清试题难度影响因素之间的关系,进而从问题表征、问题解决和结果输出等3个维度上建立了影响高中学业水平考试试题难度的主要因素。通过编写高中学业水平考试测试题进行实证研究,建立影响因素常见呈现类型的难易赋值规则。选用机器学习的线性回归方法建构试题难度分析模型,并使用高考化学江苏卷部分试题的实测难度数据进行校验,模型难度预测值和高考难度实测值具有较好的拟合度,表明模型具有较好的应用价值和推广意义。     

TRIM45 causes neuronal damage by aggravating microglia-mediated neuroinflammation upon cerebral ischemia and reperfusion injury

Excessive and unresolved neuroinflammation is a key component of the pathological cascade in brain injuries such as ischemic stroke. Tripartite motif-containing 45 (TRIM45) is a ubiquitin E3 ligase involved in various critical biological processes. However, the role of TRIM45 in cerebral ischemia remains unknown. Here, we found that the TRIM45 protein was highly expressed in the peri-infarct areas of mice subjected to cerebral ischemia and reperfusion injury induced by middle cerebral artery occlusion. This study systemically evaluated the putative role of TRIM45 in the regulation of neuroinflammation during ischemic injury and the potential underlying mechanisms. We found that TRIM45 knockdown significantly decreased proinflammatory cytokine and chemokine production in primary cultured microglia challenged with oxygen-glucose deprivation and reoxygenation (OGD/R) treatment. Mechanistically, we demonstrated that TRIM45 constitutively interacted with TAB2 and consequently facilitated the Lys-63-linked polyubiquitination of TAB2, leading to the formation of the TAB1–TAK1–TAB2 complex and activation of TAK1, which was ultimately followed by activation of the nuclear factor-kappa B (NF-κB) signaling pathway. In an in vitro coculture Transwell system, downregulation of TRIM45 expression also inhibited the OGD/R-induced activation of microglia and alleviated neuronal apoptosis. More importantly, microglia-specific knockdown of TRIM45 in mice significantly reduced the infarct size, mitigated neurological deficit scores, and improved cognitive function after ischemic stroke. Taken together, our study reveals that the TRIM45–TAB2 axis is a crucial checkpoint that controls NF-κB signaling in microglia during cerebral ischemia and reperfusion injury. Therefore, targeting TRIM45 may be an attractive therapeutic strategy.Subject terms: Cell death in the nervous system, Stroke     

The Cradle-to-Cradle Life Cycle Assessment of Polyethylene terephthalate: Environmental Perspective

Over the last several years, the number of concepts and technologies enabling the production of environmentally friendly products (including materials, consumables, and services) has expanded. One of these ways is cradle-to-cradle (C2C) certified^TM. Life cycle assessment (LCA) technique is used to highlight the advantages of C2C and recycling as a method for reducing plastic pollution and fossil depletion by indicating the research limitations and gaps from an environmental perspective. Also, it estimates the resources requirements and focuses on sound products and processes. The C2C life cycle measurements for petroleum-based poly (ethylene terephthalate) (PET) bottles, with an emphasis on different end-of-life options for recycling, were taken for mainland China, in brief. It is considered that the product is manufactured through the extraction of crude oil into ethylene glycol and terephthalic acid. The CML analysis method was used in the LCIA for the selected midpoint impact categories. LCA of the product has shown a drastic aftermath in terms of environmental impacts and energy use. But the estimation of these consequences is always dependent on the system and boundary conditions that were evaluated throughout the study. The impacts that burden the environment are with the extraction of raw material, resin, and final product production. Minor influences occurred due to the waste recycling process. This suggests that waste degradation is the key process to reduce the environmental impacts of the production systems. Lowering a product’s environmental impact can be accomplished in a number of ways, including reducing the amount of materials used or choosing materials with a minimal environmental impact during manufacture processes.