铜在HOPG上电沉积过程的现场ECSTM研究

用自制的电化学扫描隧道显微镜（ＥＣＳＴＭ）现场研究Ｃｕ在ＨＯＰＧ上的电沉积过程．结果表明Ｃｕ在ＨＯＰＧ上的电沉积为三维成核的过程．当电位较低或Ｃｕ２＋离子浓度较低时，铜在本体金属生长主要沿着台阶方向．过电位较高时，铜的成核数目增加，沉积层的晶粒有所细化．同时，非现场ＥＣＳＴＭ比较研究表明，ＳＴＭ针尖对针尖局部区域的电沉积起屏蔽作用，针尖所在区域Ｃｕ的沉积速度比其它区域明显减小     

Monitoring of mutagenic process with piezoelectric quartz crystal impedance analysis

A novel method for monitoring of mutagenic process of dimethyl sulfate to Salmonella typhimurium strain (TA100) was proposed by using piezoelectric quartz crystal impedance (PQCI) analysis technique. The time courses of responses piezoelectric impedance parameters for a quartz crystal in a culture system were simultaneously obtained and discussed. It was found that the motional resistance variation (DeltaR(m)) increases and frequency shift (Deltaf) of PQC sensor decreases correspondingly during the mutagenic process of the bacteria. These parameters could reflect the variations of viscosity and density of culture system. By fitting DeltaR(m) versus time curves toward Gompertz bacterial growth model, we obtained and discussed the bacterial growth parameters for both normal growth and mutagenic process. The experiments showed that the proposed method could provide real time and multidimensional impedance information to the monitoring of mutagenic process.     

Perfectly dissolved boron nitride nanotubes due to polymer wrapping

We report for the first time that boron nitride nanotubes (BNNTs) may be dissolved in organic solvents by wrapping them with a polymer. Transmission electron microscopy and cathodoluminescence studies indicate the strong pi-pi interactions between BNNTs and the polymer. A band gap ranging from 5.2 to 5.5 eV was documented for the BNNTs independent of their geometrical characteristics by using ultraviolet-visible absorption experiments on composite films and thin BNNT films prepared from solutions.     

Transformation of arctiin to estrogenic and antiestrogenic substances by human intestinal bacteria

After anaerobic incubation of arctiin (1) from the seeds of Arctium lappa with a human fecal suspension, six metabolites were formed, and their structures were identified as (-)-arctigenin (2), (2R,3R)-2-(3',4'-dihydroxybenzyl)-3-(3",4"-dimethoxybenzyl)butyrolactone (3), (2R,3R)-2-(3'-hydroxybenzyl)-3-(3",4"-dimethoxybenzyl)butyrolactone (4), (2R,3R)-2-(3'-hydroxybenzyl)-3-(3"-hydroxy-4"-methoxybenzyl)butyrolactone (5), (2R,3R)-2-(3'-hydroxybenzyl)-3-(3",4"-dihydroxybenzyl)butyrolactone (6), and (-)-enterolactone (7) by various spectroscopic means including two dimensional (2D)-NMR, mass spectrometry, and circular dichroism. A possible metabolic pathway was proposed on the basis of their structures and the time course of the transformation. Enterolactones obtained from the biotransformation of arctiin and secoisolariciresinol diglucoside (SDG, from the seeds of Linum usitatissium) by human intestinal bacteria were proved to be enantiomers, with the (-)-(2R,3R) and (+)-(2S,3S) configurations, respectively. Compound 6 showed the most potent proliferative effect on the growth of MCF-7 human breast cancer cells in culture among 1 and six metabolites, while it showed inhibitory activity on estradiol-mediated proliferation of MCF-7 cells at a concentration of 10 microM. These results indicate that the transformation of 1 by intestinal flora might be essential for the manifestation of the estrogenic and antiestrogenic activity of 1.     

由聚苯胺粒子组成的电流变液的研究

由经碱处理的掺杂态聚苯胺（ＰＡｎ）制得高介电常数的半导体ＰＡｎ粒子，将其悬浮于电绝缘油可组成电流变液，讨论了电流变（ＥＲ）液的静态屈服应力（τ＿ｓ），电流密度等性能与ＰＡｎ的介电常数（ε＿ｐ），导电率（σ），体积分数和应用电场强度的关系。对导电率相同的ＰＡｎ粒子，用氨水处理的ＰＡｎ粒子ε＿ｐ较用ＮａＯＨ液处理的高，前者在σ足够低如σ≤１．０×１０￣（－７）／ｃｍ时，ＥＲ液的τ＿ｓ随偶极系数的平方（β￣２）的增大而呈现非线性增加；后者ＥＲ液的τ＿ｓ随β￣２的增大出现一最大值．结果表明：由聚苯胺粒子可组成高电流变活性的无水ＥＲ液．     

In Situ Monitoring of Generation and Precipitation of Ferric Hydroxide Sol with a Piezoelectric Quartz Crystal Impedance Analyzer

The piezoelectric quartz crystal (PQC) impedance technique was applied to monitor in situ generation and precipitation of the ferric hydroxide sol in aqueous solutions at 90 degrees C. Equivalent circuit parameters and resonant frequencies as well as the half-peak width of the electroacoustic conductance spectrum deltaf(G1/2) for the PQC resonance were obtained and analyzed. Three stages, sol generation and simultaneous adsorption, adsorption equilibrium, and precipitation of ferric hydroxide sol could be identified in the process of adding the ferric nitrate solution into the hot water. A scheme of two consecutive reactions occurring at the electrode/solution interface was used to analyze the adsorption kinetics of ferric hydroxide sol onto the Au electrode. In addition, the electrolyte-induced precipitation of the colloid was monitored and discussed. Temperature effect on the PQC resonance behavior in liquid was also investigated. Since the PQC impedance technique provides multidimensional piezoelectric information in situ, it is highly recommended for studying the process of sol-gel generation and precipitation. Copyright 2001 Academic Press.     

Preparation of Small Particle Sized ZnAl-Hydrotalcite-Like Compounds by Ultrasonic Crystallization

Ultrasonic technology has been intensively studied recently due to its special features. In this paper, an ultrasonic crystallization method was introduced for the preparation of ZnAl-Hydrotalcite-Like compounds (ZnAl-HTLcs). Samples with high crystallinity, small particle size and narrow particle size distribution were obtained and fully characterized using conventional techniques of XRD, FT-IR and TGDTA. The results prove that both ultrasonic frequency and ultrasonic power have effects on the sizes of the product particles. By varying the ultrasonic power from 250 W to 88 W, with the ultrasonic frequency fixed at 59 kHz, the median particle size of the samples increased from 0.37 μm to 0.82 μm. By altering the hydrothermal treatment time from 1 h to 5 h at 110℃, the median particle size of ZnAl-HTLcs synthesized via ultrasonic crystallization increased from 0.88 μm to 1.11 μm.     

Exciton interactions in CdS nanocrystal aggregates in reverse micelle

Here we report the formation and spectroscopic properties of cadmium sulfide (CdS) nanocrystal systems: individual nanocrystal and CdS aggregates. The optical absorption and luminescence spectra of the aggregated CdS nanocrystals and individual nanocrystal show exciton aggregate and individual exciton characteristics. Although it is not Bose-Einstein condensation, such aggregated quantum dots (QDs) seem to supply us opportunity to study the interactions and condensation of excitons in multi-QDs system, not in the separated QDs system.     

Effect of drug-loading methods on drug load, encapsulation efficiency and release properties of alginate/poly-L-arginine/chitosan ternary complex microcapsules

The drug-loaded alginate/poly-L-arginine/chitosan ternary complex microcapsules were prepared by mixing method, absorption method and the combined method of mixing and absorption, respectively. The effect of drug-loading methods on drug load, the encapsulation efficiency and the release properties of the complex microcapsules were investigated. The results showed that the absorption process is a dominating factor to greatly increase the drug load of Hb into microcapsules. Upon loading Hb into microcapsules by combined method of mixing and absorption, the drug load (19.9%) is up to the maximum value, and the encapsulation efficiency is 93.8%. Moreover, the drug release is a zero-order kinetics process for the ternary complex microcapsules made by mixing. For the complex microcapsules made by absorption, the drug release is a first-order kinetics. However, for the complex microcapsules made by combining the mixing and the absorption, the drug release obeys a first-order kinetics during the first eighteen hours, changing afterwards to a zero-order kinetics process. Effect of drug-loading methods on drug load and encapsulation efficiency of alginate/poly-L-arginine/chitosan ternary complex microcapsules.     

CURING KINETICS AND PROPERTIES OF ACRYLIC RESIN CURED WITH AZIRIDINE CROSSLINKER

A kind of aziridine crosslinkers was synthesized and used to crosslink acrylate copolymers. The crosslinkingproperties and curing kinetics of the resin were studied. It was found that with the increase of the content of crosslinker in theemulsion, the mechanical properties and solvent resistance of the resin will be apparently improved, but its glass transitiontemperature (T_g) is very low. The lowest amount of crosslinker used in the acrylic resin emulsion is 0.25%. Curing kineticsstudied by DSC show that this curing reaction occurs readily because the apparent activation energy of the reaction is low(65.1 kJ/mol). These results demonstrate that the aziridine crosslinker is indeed a low temperature crosslinking agent and canbe used at room temperature.