视频流无缝拼接中的帧转换

帧转换在MPEG-2视频流无缝拼接中有着非常重要的作用。文中就压缩域视频流的无缝拼接中的帧转换技术进行了深入的分析。文中以12帧IBBP结构的GOP为例分析了拼接点处应采用的帧转换方案,在此基础上给出帧转换的具体实现,并通过一个帧转换实验对之进行了验证。     

热作模具钢表面激光堆焊耐磨合金层的研究

本文主要通过在H13钢上用大功率CO_2激光束进行堆焊,阐述了激光堆焊工艺变化对堆焊组织和性能的影响,在本试验条件下,得到了高密度弥散金属化合物组织的激光堆焊层,平均硬度为HV800,与基体呈冶金结合,耐磨性比H13模具钢提高149%。     

MIM隧道发光结的负阻现象

本文介绍了薄膜隧道发光结的基本结构、发光机理，阐述了其Ｉ－Ｖ特性中的负阻现象。简单介绍了ＭＩＭ结构负阻的几种解释，根据热像仪照片和低温测试结果分析，再结合Ｄｅａｒｍａｌｅｙ导电模型，我们提出了ＭＩＭ负阻的物理模型，理论与实验符合较好，最后分析了负阻现象的应用前景。     

正交特征群

本文在证明了有限Ａｂｅ１群Ｇ与它的特征群Ｇ√存在同构的一个必要充分条件之后，构造了一类正交特征群，从而概括了相当一大类正交变换（它包括了离散付里叶变换、阿达玛变换、数论变换、Ｃｈｒｅｓｔｅｎｓｏｎ变换）这对构成有限域与整环上的正交变换具有指导作用。     

一类带等式约束非光滑最优化问题的逐次二次规划方法

本文对一类带等式的非光滑最优化问题给出了一种逐次二次规划方法。这类问题的目标函数是非光滑合成函数，约束函数是非线性光滑函数。该方法通过逐次解二阶规划寻找搜索方向，使用ｌ１－罚函数的非精确线搜索得到新的迭代点。我们证明了算法的全局收敛性并给出了数值试验结果。     

铌酸锂γ射线辐照色心缺陷的研究

对铌酸锂晶体进行γ射线辐照处理，吸收光谱显示基础吸收边紫移，４８０ｎｍ波长附近出现一明显吸收峰，这是由空位色心Ｖ０和Ｎｂ＾４＋缺陷引起的，Ｎｂ＾４＋的存在进一步被ＥＰＲ实验所证实。本文对上述辐照缺陷的产生机理进行了讨论。     

Modulation and Equalisation Considerations for High Performance Radio LANs

The European Telecommunications Standards Institute (ETSI) has recently defined a European standard for a high performance radio LAN (known as HIPERLAN). To operate as wired LAN replacements, these systems will operate at 5.2 GHz and support instantaneous bit rates of just under 24 Mb/s. To counteract the time dispersive nature of the indoor radio channel, the use of adaptive equalisation is suggested. In this paper a number of possible modulation and equalisation techniques are presented and, in particular, the Bit Error Rate (BER) performance of quasi-coherent GMSK combined with Decision Feedback Equalisation is explored through computer simulation. The trade off between symbol spaced and fractionally spaced equalisation is considered together with the importance of feedfoward and feedback synchronisation to the channel's power delay profile. The paper also includes a comparison of the RLS and LMS based training algorithms and compares the modem developed under the ESPRIT III LAURA project with that specified in HIPERLAN.The application of dual antenna diversity is investigated and its impact on the number of received error free data packets obtained as a function of signal leval and rms delay spread. The use of such diversity is shown to greatly improve the BER performance of a HIPERLAN modem. The problem of frequency offset is considered and modifications are proposed to the HIPERLAN frame structure to improve the receiver's tolerance to such errors. Important practical issues such as frame and symbol synchronisation, frequency offset correction and hardware implementation are discussed from both the LAURA and HIPERLAN viewpoint.     

Yb3+掺杂KY(WO4)2激光晶体生长、结构与光谱分析

采用顶部籽晶提拉法(TSSG)生长出Yb:KY(WO₄)₂(Yb:KYW)激光晶体.对预烧后的原料及晶体进行了XRD分析，结果表明，分别在920℃和600℃预烧8h后的熔质和助熔剂基本上形成一相，抑止了实验中的挥发问题；所生长的晶体为β-Yb:KYW，计算其晶格常数为a=1.063nm，b=1.034nm，c=0.755nm，β=130.75°.测得不同厚度样品的吸收光谱，结果表明样品在933nm和981nm有较强的吸收峰，计算出主峰981nm的吸收截面σ关键词： Yb:KYW TSSG法 晶体结构 光谱参数     

应力对M-Z型InP/InGaAsP-EAM偏振

采用Agilent 81910A光子全参量测试仪,首次实验研究了InP/In1－xGaxAs1－yPy-MQW（Multiple-Quantum-Well,MQW）材料与衬底间因应力而产生的M-Z型光调制器的PDL影响以及由此引起的由差分群时延(Differential Group Delay,DGD)表征的偏振模色散(Polarization Mode Dispersion,PMD).研究结果表明,半导体MQW光调制器的PDL与DGD是一致的.因此在半导体光器件的制作过程中,应尽可能地减小衬底与波导芯层之间的因残存应力的存在造成对光器件的高速性能的不利影响.