喹诺酮类N1位定量构效关系研究

氟隆诺酮类化合物是抗菌药中的重要一类，由于它的许多突出特点，已引起越来越多的研究者的关注山．这类化合物骨架见图1．我们对该类化合物进行过一些研究［’‘l自发现诺氟沙星＊以后，几位取代基在寻找高效、广谱峻诺酮类化合物方面起重要作用，但在发现环丙基（1983年）、特丁基（1989年）以后，一直未发现新的有意义的取代基·在NI位定性与定星构效关系的研究中有二种观点：（1）古贺弘等k’］提出的由立体效应决定的观点；（z）Domagala［71、Chu问等主张的立体与电子效应共同起作用的观点·3D－QSAR研究中的比较分子力场分析（Co…     

Studies on the determination of diacetyl guanfubase A concentration in rabbit plasma and pharmacokinetics

A gas chromatographic method for monitoring diacetyl guanfubase A in plasma is described. The procedure involved a single solvent extraction of drug from rabbit plasma into ethyl acetate with guanfubase A as an internal standard. The extract was analyzed subsequently on a gas chromatograph equipped with a hydrogen flame ionization detector. The recovery was 86.43% +/- 6.90% (+/- SD); the RSD of within-day and between-day was 2.81%-5.26% and 5.22%-8.24%, respectively; the regression line was linear over the concentration range of 25-200 micrograms/mL, the limit of detection was 10 micrograms/mL. No endogeneous interference was found in chromatograms of the biological samples. This method was applied to the pharmacokinetic study of diacetyl guanfubase A in rabbits.     

英平诸痹灵药酒中钴,锶,锂含量分析

采用火焰原子吸收分光光度法测定５种英平诸痹灵药酒中钴、锶、锂的含量。结果表明，该类药酒中微量元素Ｓｒ含量较高，微量元素Ｃｏ、Ｌｉ含量较低，该结果为讨论抗类风湿药物中微量元素与治疗类风湿疾病的关系提供了有用数据。     

铝交联皂石的合成和表征及催化性能

用XRD、化学分析、IR、MASNMR、TPD等手段表征了合成皂石及其铝交联物的结构。结果表明:皂石的交联密度与四面体层电荷和交联条件(Al/土比)有关。在乙醇氨化反应中,交联皂石显示了较好的催化活性和选择性。皂石的交联密度与液相产物分布的关系表明层柱材料对此反应具有择形催化作用。醇氨化反应可能是在吸附态NH_3和气相醇分子间进行的。     

反相高效液相色谱法分析无机阴离子研究

本文研究了提高ＲＰ－ＨＰＬＣ测定无机阴离子的选择性的方法，设计了利用对离子试剂和背景试剂兼作ｐＨ调节剂，建立了几种分离分析系统和实际样品分析方法。     

A new Co(2)(CO8-mediated tandem [5 + 1]/[2 + 2 + 1]-cycloaddition reaction: a one-pot synthesis of tricyclic delta-lactones from cis-epoxy ene-ynes

In the presence of Co2(CO)8 and CO, cis-epoxyalkynes bearing a tether olefin undergo a tandem [5 + 1]/[2 + 2 + 1]-cycloaddition to give tricyclic delta-lactones efficiently in a one-pot operation. The reaction mechanism is proposed to involve a cobalt-coordinated cyclic allene species.     

Solving the 3-SAT problem based on DNA computing

The 3-SAT problem is an NP-complete problem, and many algorithms based on DNA computing have been proposed for solving it since Adleman's pioneering work. This paper presents a new algorithm based on the literal string strategy proposed by Sakamoto et al. Simulation results show that the maximal number of literal strings produced during the computing process is greatly reduced. Moreover, the length of the literal strings is also reduced from m to n at most.     

Effect of multi-walled carbon nanotubes on non-isothermal crystallization kinetics of polyamide 6

The non-isothermal crystallization behaviors of multi-walled carbon nanotubes (MWNTs)/polyamide 6 (PA6) composites were investigated by differential scanning calorimetry (DSC). Three methods, namely, Avrami, Ozawa and Mo, were carried out to analyze the non-isothermal crystallization data. The results showed that the MWNTs in PA6 acted as effective nucleation agents. However the crystallization rate of composites obtained was lower than that of the neat PA6. It is indicated that the presence of MWNTs influenced the mechanism of nucleation and the growth of PA6 crystallites.     

Elastic scattering cross sections for 160<Superscript>°</Superscript> and 170<Superscript>°</Superscript>backscattering of 1.40-2.64 MeV protons from natural vanadium

Summary The elastic scattering cross sections of natural vanadium for protons have been measured for beam energies below 2.64 MeV in steps of 10 keV and in the angular 160° and 170°. The overall standard error (Δσ_Exp/σ_Exp) in the measured cross sections is estimated to be better than ±3% at all the beam energies and angles. The results are presented in graphical and tabular forms that should be useful for those who wish to use the cross sections for material analysis.     

Core/shell particles containing 3-(methacryloxypropyl)-trimethoxysilane in the shell: synthesis, characterization, and application

In comparison to the corresponding single-component counterparts, core/shell particles are widely used due to their better physical and chemical properties. The surface properties of core/shell particles evidently play an important role in the process of application. It is easy to deduce that surface properties mostly depend on the properties of the component in the shell. Therefore, desirable materials of shell are very significant for the study of composite materials, especially in core/shell field. It is well known that polysiloxane has excellent properties, such as the water repellency, high flexibility, low surface energy, and biocompatibility. Its application, however, is limited due to poor cohesiveness and poor film-forming properties. Recently, much endeavor has been made to overcome such flaws. It is found that polyacrylate is commonly considered for its good cohesiveness and excellent film-forming property. The combination of polysiloxane and polyacrylate has been shown to be important in the composite material field, especially as core/shell particles. Unfortunately, their hydrophobicity is considerably different and thus, the core/shell particles consisting of polyacrylate (PA)/polysiloxane (PSi) are hard to prepare by general seeded emulsion polymerization, and are also scarcely available in the literature. In this study, the new core/shell PA/PSi particles with poly(butyl methacrylate) (PA) as the core and poly(3-(methacryloxypropyl)-trimethoxysilane) (PSi) as the shell were prepared by dispersion polymerization under the kinetically controlled conditions. The characterization of the particles by TEM, DSC, particle size analyzer as well as static contact angle confirmed the formation of core/shell structure. The application of core/shell (PA/PSi) particles also has been considered and discussed here.TEM micrographs of core/shell (PA/PSi) particles.