大米中硒的FI-HG-AAS测定方法研究

研究了原子化器温度、载气流速、KBH4 浓度等条件对流动注射 氢化物发生 原子吸收光谱法 (FI-HG -AAS)测定硒时的影响。建立了FI-HG -AAS测定大米中硒的分析方法。在优化的工作条件下 ,测定硒的最低检测浓度为 0 3 3 μg·L- 1,线性范围为 0～ 5 0 μg·L- 1,相对标准偏差小于 4% ,加标回收率为 94%～ 1 0 2 %。本法克服了传统的间断氢化物发生 原子吸收光谱法分析速度慢、样品耗量大、操作繁琐且因手工进样在进样速度和进样体积上容易带来误差等缺点。方法操作简便、快速 ,灵敏度及自动化程度高 ,已广泛应用于大米及富硒大米中微量硒的测定     

基于人工神经网络的商业银行信用风险模型

在对人工神经网络的基本原理进行简要介绍的基础上 ,着重对构建商业银行信用风险的人工神经网络模型进行了研究 ,实证结果表明 ,人工神经网模型具有很高的预测精度     

强度调制型光纤传感器信号补偿技术的现状与应用

简要地介绍了强度调制光纤传感器的特点,着重分析和比较目前国内外五种有代表性的强度调制型光纤传感器信号补偿方法及其应用状况.     

Unified analytical expressions for calculating resonantfrequencies, transimpedances, and equivalent input noise currentdensities of tuned receiver front ends

Unified analytical expressions have been derived for calculating the resonant frequencies, transimpedance and equivalent input noise current densities of the four most widely used tuned optical receiver front ends built with FETs and p-i-n diodes. A more accurate FET model has been used to improve the accuracy of the analysis. The Miller capacitance has been taken into account, and its impact on the performances of the tuned front ends has been demonstrated. The accuracy of the expressions has been verified by Touchstone simulations. The agreement between the calculated and simulated performances of the front ends is very good. The expressions can be used to investigate the performances of different tuned front ends in a very simple way and provide a good starting point for further computer optimizations of the front ends     

I．O．T．旧梦成真

该文较详细地介绍了Ｉ．Ｏ．Ｔ管的发展历程，其特点及工作方式。     

Synthesis and nuclear magnetic resonance analysis of starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers

A new biodegradable starch graft copolymer, starch‐g‐poly(1,4‐dioxan‐2‐one), was synthesized through the ring‐opening graft polymerization of 1,4‐dioxan‐2‐one onto a starch backbone. The grafting reactions were conducted with various 1,4‐dioxan‐2‐one/starch feed ratios to obtain starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers with various poly(1,4‐dioxan‐2‐one) graft structures. The microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was characterized in detail with one‐ and two‐dimensional NMR spectroscopy. The effect of the feed composition on the resulting microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3417–3422, 2004     

A method for designing high-power offset Cassegrain antennas

Starting from the geometrical parameters of the feed and the desired gain of the Cassegrain antenna, a method to determine the design starting parameters for a high-power offset Cassegrain antennas is discussed. Then, by numerically solving the equations governing the antenna geometry, a set of design curves are obtained, with which the structure of the antenna can be determined by trading off the electrical and geometrical system requirements. The method presented can be applied to both high or low gain feeds for constructing a high power microwave electromagnetic environment, where complex electronic systems can be tested. For linearly polarized feeds with high gain, the structure parameters of antenna with zero cross polarization can be obtained, which is equal to the design results of Brown and Prata (see IEEE Trans. Antennas Propagat., vol.42, no.8, p.1145-53, 1994)     

一种彩色C型显示及数据处理终端

本文介绍了一种利用数字信号处理器ＴＭＳ３２０Ｃ２５用作雷达数据实时处理，利用图形处理器ＴＭＳ３４０１０用作雷达视频图象处理，完成雷达视频图象彩色显示的雷达终端。     

On the Kauffman skein modules

 Let k be a subring of the field of rational functions in α, s which contains α ^±1 ,s ^±1 . Let M be a compact oriented 3-manifold, and let K(M) denote the Kauffman skein module of M over k. Then K(M) is the k-module freely generated by isotopy classes of framed links in M modulo the Kauffman skein relations. In the case of , the field of rational functions in α, s, we give a basis for the Kauffman skein module of the solid torus and a basis for the relative Kauffman skein module of the solid torus with two points on the boundary. We then show that K(S ¹ × S ² is freely generated by the empty link, i.e., . Received: 20 October 2001 / Revised version: 20 March 2002