3G室内分布系统设计与优化关键问题

首先对3G室内分布系统特点进行介绍,然后对其设计过程中的关键问题进行分析,并给出在后续网络优化过程中的常见问题和相应解决方案。     

具有一对零态射的Morita Context环(II)

设$(A,B,V,W,\psi,\phi)$是一个Morita Context,具有一对零态射$\psi=0$, $\phi=0$, $C =\left ( \begin{array} {cc}A & V \\W & B \end{array}\right)$是对应的Morita Context环.本文给出了$C$与$A,B,V,W$之间关于环的$\pi$-正则性、semiclean性、Mophic性和环的Exchgange性、Potent性、GM性的关系.     

电热蒸发进样微波等离子体炬原子发射光谱法中共存元素的影响

本文考察了以微波等离子体炬（MPT）为光源，电热钽丝环进样时，溶液中共存元素对发射信号的影响。     

非谐振腔型KTP光参变振荡器

研究了双晶体走离补偿、非谐振腔型KTP光参变振荡器，利用一套膜片实现了KTP相位匹配所允许的全波段调谐，信号光调谐范围0.698μm-1.026μm，闲频光调谐范围1.105μm-2.237μm。5倍阈值处，信号光840nm最高输出能量53mJ，能量转换效率25.8%，量子转换效率40％，闲频光的量子郊率也达到32％。     

激光焊接超细基胎体金刚石薄壁钻

采用激光焊接超细预合金粉胎体，开发了新的薄壁钻产品，通过对与现有的产品工艺、性能测试以及实际使用分析对比，结果表明：激光焊接与普通钎焊相比结合强度提高2－3倍，克服了胎体脱落问题，胎体耐磨性提高了50％－120％，其中轴向磨损速率提高1．2倍；钻削速度提高30．4％，工矿适应性增加，使用寿命提高25％－108％。     

Monte Carlo simulations on magnetic behavior of a spin-chain system in triangular lattice doped with antiferromagnetic bonds

A three-dimensional Ising-like model doped with anti-ferromagnetic (AFM) bonds is proposed to investigate the magnetic properties of a doped triangular spin-chain system by using a Monte-Carlo simulation. The simulated results indicate that a steplike magnetization behavior is very sensitive to the concentration of AFM bonds. A low concentration of AFM bonds can suppress the stepwise behavior considerably, in accordance with doping experiments on Ca₃Co₂O₆. The analysis of spin snapshots demonstrates that the AFM bond doping not only breaks the ferromagnetic ordered linear spin chains along the hexagonal c-axis but also has a great influence upon the spin configuration in the ab-plane.      

Self-Assembly of Micro-Parts onto Si Substrates at Liquid-Liquid Interface

We report a new approach for the self-assembly of cuboid micro-parts onto Si substrates to construct three-dimensional microstructures. To perform assembly, the Si substrates are prepared with a deep cavity array as binding sites. An aggregate composed of hundreds of uniformly aligned micro-parts is formed at the C10F18-H2O interface. The micro-parts are arranged by passing the substrate through the aggregate of micro-parts, thus the micro-parts are left on the substrate, and then the substrate is vibrated ultrasonically in the solution, making it possible for the micro-parts to fall into the cavities on the substrate. Finally the substrate is pulled out of the solution after assembly. This technique could give a high yield of up to 70%, providing a new method for micro-assembly.     

Facile route to high-density, ordered ZnO nanowire arrays and their photoluminescence properties

A simple template-directed wet chemistry route based on traditional thermal decomposition technique has been developed for the preparation of high-density, ordered ZnO nanowire arrays. The fabrication was performed at relative low temperature without involving complex procedures, sophisticated equipment and rigorous experiment conditions, thereby providing a straightforward and mild method to produce metal/metal oxide ordered nanostructures. The nanowire array system was evaluated by SEM, XRD, TEM and PL. A stable luminescence at 425 nm was present.     

Chemoselective Catalytic Hydrogenation of α,β-Unsaturated Ketones and α,β-Unsaturated Carboxylic Esters

ＣｈｅｍｏｓｅｌｅｃｔｉｖｅＣａｔａｌｙｔｉｃＨｙｄｒｏｇｅｎａｔｉｏｎｏｆα，β┐ＵｎｓａｔｕｒａｔｅｄＫｅｔｏｎｅｓａｎｄα，β┐ＵｎｓａｔｕｒａｔｅｄＣａｒｂｏｘｙｌｉｃＥｓｔｅｒｓＺＨＡＮＧＪｉｎｇ－ｗｅｎ＊，ＺＨＡＯＪｉａｎ－ｚｈａｎｇ，Ｚ...