现场表面拉曼光谱研究Fe-Mo合金诱导共沉积

现场表面拉曼光谱结果显示，在0．2mol·L-1Na2MoO4,pH＝4．0的溶液中，电位正于0．5V（vsSCE）时只观察到多钼酸盐的拉曼峰（940、880和450cm-1）．负于-0．5V时，出现中心位于730cm-1的宽峰．同时电极表面有蓝色膜生成．表明混合氧化态（MO（Ⅳ），MO（Ⅴ））氧化膜的形成．730cm-1的峰在-1．9V时仍然存在，说明氧化膜没有被进一步还原．在钼酸钠溶液中同时含有0．1mol·L-1FeSO4和0．2mol·L-1柠檬酸时，中间态氧化膜的拉曼峰的中心移到740cm-1．且峰强度随着电位从-1．3V负移到-1．9V而逐渐减弱并最终消失．电极表面沉积层呈银白色，说明由于Fe2 的存在，钼的中间态氧化膜的结构发生了变化，能够被进一步还原形成Fe－Mo合金，表现出诱导共沉积的特征．     

Preparation and characterization O-lauroyl chitosan/poly (L-lactic acid) blend membranes by solution-casting approach

O-Lauroyl chitosan/poly(L-lactide) (OCS/PLLA) blend membranes with different compositions were prepared by solution-casting approach using chloroform as common solvent. The experimental results of FT-IR, DSC and WAXD indicated that inter-association hydrogen-bond interactions existed between OCS and PLLA in the blend membranes. And SEM observation confirmed that the blend membranes with suitable compositions were compatible.     

Unusual magnetic properties of one-dimensional molecule-based magnets associated with a structural phase transition

Three ion-pair complexes, [RbzPy](+)[Ni(mnt)(2)](-) (mnt(2)(-) = maleonitriledithiolate; [RbzPy](+) = 4-R-benzylpyridinium; R = Br (1), Cl (2), and NO(2) (3)), with unusual magnetic properties have been synthesized and characterized. The crystal structures of 1 and 2 have been solved. The two complexes belong to the P2(1)/c space group with Z = 4 and C(20)H(11)BrN(5)NiS(4), a = 12.0744(17) A, b = 26.369(4) A, c = 7.440(3) A, and beta = 102.63(3) degrees for 1 and C(20)H(11)ClN(5)NiS(4), a = 12.105(2) A, b = 26.218(4) A, c = 7.374(2) A, and beta = 102.55(2) degrees for 2, respectively. The [Ni(mnt)(2)](-) anions in 1-3 form uniformly spaced one-dimensional (1-D) magnetic chains of s = 1/2 at room temperature. The temperature dependences of the susceptibility for 1-3 show that they undergo phase transitions. All three complexes are paramagnetic in their high-temperature (abbreviation HT) phase and diamagnetic in the low-temperature (abbreviation LT) phase because of strong dimerization along the stacking direction. The results of thermal analysis (DSC) further confirm that the phase transition for 1 and 2 is first-order but maybe second-order for 3. The phenomena observed in this study are similar to those of the 1-D radical systems.     

Phosphonium and arsonium ylides. XVII. A facile synthesis of methyl 2,6-bisperfluoroalkylbenzoates via acyclic precursors

The title compounds 6a—6f were prepared with high yield via intramolecular Wittig reaction of methyl 3-perfluoroalkyl-6-peifluoroacyl-2-triphenylphosphoranylidenchex-3,5-dienoates (5a—5i) which were obtained from the reaction of 3-perfluoroacylprop-2-enylidenetriphenylphosphoranes (3a—3c) with methyl perfluoroalkynoates (4a—4c).     

氧化锶催化性质：Ⅱ.SrO,MgO上异丙醇的分解反应

ＳｒＯ，ＭｓＯ对异丙醇的分解反应有各自的作用形式，因而产物分布也有明显差别．ＭｇＯ上异丙醇分解，在较低温度时，主要产物为丙酮和丙烯；随温度升高，生成丙烯的量增加，而丙酮的量减少，直至消失，在ＳｒＯ上，异丙醇在较高温度时反应，产物几乎为丙酮，丙烯的生成量极少。认为：产物中丙烯来源于异丙醇在催化剂表面强酸中心上的脱水；丙酮在ＭｇＯ上来源于强碱中心和酸中心协同作用异丙醇的脱氢，而在ＳｒＯ上则是ＳｒＯ表面极强的碱中心作用异丙醇而脱氢制得。     

ZrxTixAl1-2xO2的制备及其在三效催化剂上的应用

Zr_0.5Ti_0.5O₂(ZT) and Zr_0.25Ti_0.25Al_0.5O₂(ZTA) mixed oxides were prepared by co-precipitation method and characterized by low temperature adsorption-desorption， XRD and NH₃-TPD. The activity of Pt/Zr_0.5Ti_0.5O₂ and Pt/ Zr_0.5Ti_0.5Al_0.5O₂ catalysts was evaluated using the simulated gases. The results show that ZTA samples exhibit higher specific surface area， larger pore volume and proper surface acidic amount and acidity in comparison with ZT. The results of the catalytic test indicate that Pt/ZT and Pt/ZTA catalysts exhibit excellent low-temperature catalytic activity and lower light-off temperatures of hydrocarbon， carbon monoxide and nitrogen oxides， especially better conversion for nitrogen oxides (NO_x). The addition of Al₂O₃ into ZT enhanced the anti-aging property of Pt/ ZTA catalysts due to the excellent textural， structural， surface acidity and thermal stability.     

A new study of the degradation of hyaluronic acid by hyaluronidase using quartz crystal impedance technique

A new quartz crystal impedance sensing technique for the assay of hyaluronidase (HAse) activity is presented. It is based on the changes in viscosity and density during the enzymatic hydrolysis of hyaluronic acid (HA) by HAse. The variations of equivalent circuit parameters of piezoelectric quartz crystal (PQC) during the enzymatic degradation are discussed. The motional resistance shift curves indicate that the viscosity of the test solutions decreases during the hydrolysis process. The initial hydrolysis rates of HA are obtained from changes in viscosity and density as a function of incubation time. Kinetic parameters (the Michaelis constant K(m) and the maximum hydrolysis rate V(max)) of the degradation reaction are estimated by using a linear Lineweaver-Burk plot in this work. The K(m) was 0.44+/-0.03 mg.ml(-1) and the V(max) was -(5.29+/-0.36)x10(-3) kg.m(-2).s(-1/2).min(-1).     

Preparation of a piezoelectric immunosensor for the detection of Salmonella paratyphi A by immobilization of antibodies on electropolymerized films

 To obtain new coatings for the preparation of piezoelectric immunosensors, the anodic polymerization of o-aminophenol (oAP), o-phenylenediamine (oPD) and m-phenylenediamine (mPD) onto a gold-plated crystal has been studied. The possibility of immobilizing an antibody (anti-S. paratyphi A) onto the crystal via the electropolymerized films was investigated. The poly-mPD film gave the best results for immobilizing the antibody. With antibodies crosslinked on the poly-mPD film, a piezoelectric immuno-assay for the detection of S. paratyphi A was proposed. The shift (ΔF=F_20s−F_400s, Hz) between the frequency at 20 s after the addition of sample (F_20s), and that of 400 s (F_400s) was used to construct a calibration graph, and shortening of the assay time was achieved. The S. paratyphi A concentration in the range of 10^5–10⁹ cells/ml can be measured by this method. Received: 9 May 1996/Revised: 6 September 1996/Accepted: 19 September 1996     

Investigation of the effects of Au-colloid modification on cobalt hexacyanoferrate film growth and mass transport by electrochemical quartz crystal microbalance

The growth of cobalt hexacyanoferrate (CoHCF) films on bare and Au-colloid-modified electrodes in nitrate or sulfate solutions was monitored by electrochemical quartz crystal microbalance. The average efficiency of CoHCF film growth for Au colloid modified electrodes is 23 and 12 ng cm(-2) s(-1) in KNO3 and K2SO4 solutions, respectively, while those values for the bare gold electrode are 15 and 9 ng cm(-2) s(-1), respectively. In K2SO4 solution, the apparent molar masses for the Au-colloid-modified electrode at lower and higher potential is 58.4 and 37.3 g mol(-1), respectively, which is larger than those for the bare gold electrode (51.7 and 26.3 g mol(-1), respectively). The respective results were also obtained in KNO3 solution. Furthermore, the difference of the apparent molar masses at lower and higher potential for Au-colloid-modified electrodes is smaller than that for bare gold electrodes in the same electrolyte. Additionally, the mechanism of charge propagation is dependent on different anions in electrolyte solutions at higher potentials where the second redox reaction of CoHCF occurs. Therefore, the existence of Au colloids can accelerate CoHCF film growth and weaken the effect of anions on mass transport.