Selective-repeat-ARQ schemes for broadcast links

The authors propose retransmission error control schemes for broadcast channels. In their selective-repeat-ARQ (automatic repeat request) method, they incorporate some aspects of implementation that they believe were ignored by all the previous work. Based on this protocol, they also propose a type-2 hybrid ARQ scheme that uses parity retransmission. They apply the dynamic programming optimization technique of Wang and Silvester (1987), with some modification, to their schemes. Analysis shows that their schemes outperform all the existing schemes. As special cases of their proposed schemes, the authors can obtain point-to-point ARQ schemes which also outperform all the existing point-to-point schemes. Thus, their schemes extend the useful range of retransmission error control schemes for these channels     

互联网中流媒体及其QoS控制技术的研究

通过对Internet中流媒体及其QoS控制技术的讨论，构架出了Internet中流媒体及其QoS控制的关键技术。并提出针对发送端和接收端的QoS控制，讨论两端的控制技术；并提出了非均匀QoS控制技术。     

应用OBI系统分析胸部肿瘤调强放疗的摆位误差

目的：应用机载影像系统（on boardinmger,OBl）分析胸部肿瘤调强放射治疗时分次间的摆位误差,并依此计算CTV外扩PTV边界的大小。方法：应用Varian-21EX医用直线加速器治疗47例胸部肿瘤。每周治疗前获取锥形束断层扫描（cone beam computed tomography,CBCT）图像,将CBCT图像和计划CT图像及其靶中心匹配,计算平移和旋转误差。结果：平移误差左右（x）方向为（-0．3194±3．6943）mm,头脚（y）方向为（0．4851±6．2636）mm,前后（z）方向为（0．4144±5．2818）mm;旋转误差冠状面（c）为（0．2080±1．4925）°,矢状面（s）为（0．0922±1．2976）°结沦：对于胸部肿瘤调强放疗（IMRT）,临床靶体积（CTV）到计划靶体积（PTV）的外放边界在左右方向宜为7mm,头脚方向宦为11mm,前后方向宜为10mm。考虑到旋转误差,与靶区比较长时靶区两端外放要更大一些.     

2.5Gb/s光外调制器及驱动器

文章对光外调制作了原理及实验上的分析,着重研究作为驱动器的大功率宽带放大器。对２．５Ｇｂ／ｓＮＲＺ伪随机码对放大器的低端截止频率和高端截止频率的要求进行了理论分析。提出并实验了几种放大器高频补偿技术,取得了好的效果。为满足输入输出阻抗为５０Ω的要求采用了共面波导计算方法,以确定印刷电路板导线尺寸。最后对光外调制器输出波形进行了测试。     

高重复频率卫星激光测距实验研究

介绍了上海天文台开展高重复频率激光测距实验和卫星实测情况.通过研制事件模式距离门控电路,开发高实时性测距控制软件,引进高精度事件计时器,利用重复频率为1 kHz、能量2 mJ的半导体泵浦激光器,以60 cm激光测距仪为平台,成功实现了对(800～7000)km卫星的高重复频率激光测距,所获得的回波数据是常规低重复频率测距的2～3个数量级.     

两种脉冲涡流轴对称有限元模型的比较

脉冲涡流检测技术是近年来发展迅速的一种新型涡流检测技术。由于其激励信号频谱宽广,不同频率分量的涡流能够渗透到不同深度,使其检测信号包含更丰富的深度方向的缺陷信息,在航空维修等工业领域有着重要的意义。对脉冲涡流检测的仿真可以指导脉冲涡流检测技术的研究。本文利用二维轴对称模型,介绍r脉冲涡流有限元仿真的两种方法一傅里叶变换法和时间步进法,并详细比较了这两种方法的优缺点。     

液晶投影电视中视频信号与显示模件接口电路的设计与研究

本文介绍了液晶投影电视的基本原理和光学系统,根据液晶显示模件的接口参数,设计了液晶投影电视的接口电路,对该电路的工作原理进行了分析和讨论。同时,对行同步相位调整电路进行了详细的电路设计和研究。     

液氮的受激喇曼散射研究

本文使用染料测Q红宝石激光激励液氮的受激喇曼散射，观察到一级斯托克斯、一级反斯托克斯和二级反斯托克斯线，测得散射光的喇曼频移、线宽、能量转换率和退偏振度等参数．并对所得结果进行了讨论。     

A general cone-beam reconstruction algorithm

Considering the characteristics of the X-ray microscope system being developed at SUNY at Buffalo and the limitations of available cone-beam reconstruction algorithms, a general cone-beam reconstruction algorithm and several special versions of it are proposed and validated by simulation. The cone-beam algorithm allows various scanning loci, handles reconstruction of rod-shaped specimens which are common in practice, and facilitates near real-time reconstruction by providing the same computational efficiency and parallelism as L.A. Feldkamp et al.'s (1984) algorithm. Although the present cone-beam algorithm is not exact, it consistently gives satisfactory reconstructed images. Furthermore, it has several nice properties if the scanning locus meets some conditions. First, reconstruction within a midplane is exact using a planar scanning locus. Second, the vertical integral of a reconstructed image is equal to that of the actual image. Third, reconstruction is exact if an actual image is independent of rotation axis coordinate z. Also, the general algorithm can uniformize and reduce z-axis artifacts, if a helix-like scanning locus is used.