一个可靠机器,一个不可靠机器和一个缓冲库构成的系统的定性分析

本文用纯分析的方法给出了一个可靠机器 ,一个不可靠机器和一个缓冲库构成的系统解的存在唯一性证明     

Crystal structure,dielectric and piezoelectric properties of Ta/W codoped Bi3TiNbO9 Aurivillius phase ceramics

Aurivillius phase Bi₃Ti_1−xTa_xNb_1−xW_xO₁₂ high temperature piezoceramics were prepared by a conventional solid state reaction method. The crystal structure, dielectric, electrical conduction and piezoelectric properties were systematically studied. Pure or modified Bi₃TiNbO₉ ceramics revealed the presence of only two-layered Aurivillius phase, indicating that Ta/W doping entered into the B-site of pseudo-perovskite structure and formed solid solutions. The Curie temperature had a strong reliance on the structural distortion. Furthermore, Ta/W dopants act as a donor doping, decrease the number of oxygen vacancies and facilitate the domain wall motion. As a result, Ta/W modifications significantly increase the DC resistivity and piezoelectric properties. Bi₃Ti_0.98Ta_0.02Nb_0.98W_0.02O₁₂ ceramics possess the optimum d₃₃ value (∼12.5 pC/N) together with a high T_C point (∼893 °C). Moreover, the resonance–antiresonance spectra demonstrate that the Ta/W-BTN ceramics are indeed piezoelectric in nature at 600 °C. The d₃₃ value of BTTNW-2 ceramic remains ∼12.2 pC/N after annealing at 700 °C. These factors suggest that the BTTNW-based ceramic is a promising candidate for ultra-high temperature sensor applications.     

The synthesis and photolysis mechanisms of 8‐nitroquinoline‐based photolabile caging groups for carboxylic acid

Photolabile protecting groups have been extensively studied and applied for protection of small biological molecules, which make it convenient to detect the biological processes of the caged compounds. In this study, a series of 8‐nitroquinoline‐based photolabile caging groups for carboxylic acid were synthesized with improved photolysis efficiency. Among them, 6‐bromo‐8‐nitro‐1, 2‐dihydroquinolinyl chromophore was proven the best derivative on account of its longest absorption wavelength (345 nm), highest caging ability, and quantum yield (Φ = 0.003). Moreover, density functional theory calculations were performed in order to study the photolysis mechanisms. Theoretical calculations revealed that the reaction was kinetically inert under general mild condition with the high barrier height of 34.3 kcal/mol at carbonyl migration step, while under the photolysis condition, because of the large energy gap (64.5 kcal/mol) between S₀ and S₁ states, the reaction should be accessible in the triplet ground state (T₁) through successive excitation of S₀ → S₁ states, subsequent intersystem crossing of S₁ → T₁ states, and finally returned to the stable S₀ state for product via potential energy surface crossing between T₁ and S₀ states. Copyright © 2014 John Wiley & Sons, Ltd.     

Novel shooting method with simple control strategy for fiber lasers

A novel shooting method with excellent simple control strategy is developed for solving the failure to convergence of the traditional shooting methods themselves in fiber lasers model. Compared with the published literature, the novel shooting method provides a clear physical understanding method for getting the threshold pump power and the exact results with given random functions in Yb³⁺-doped fiber lasers and Er³⁺-doped fiber lasers. Then, the results in Er³⁺-doped fiber lasers and Yb³⁺-doped fiber lasers demonstrate that the solutions using the novel shooting method has high accuracy of 10⁻⁸ W with several iteration steps, which have extended the applicable range of the end-pumped power even lower than 1 mW pump power. Furthermore, compared with 1480 nm pump for the threshold and slope efficiencies of the Er³⁺-doped fiber lasers, 978 nm fiber lasers can extend wider scope of application and be pump source in the coming future. Finally, the lower threshold and higher slope efficiency at 975 nm than those of 910 nm pump in Yb³⁺-doped fiber lasers, 975 nm pump laser provides for broad band excellent cladding pump source.     

Enhancing surface plasmon polariton propagation by two-layer dielectric-loaded waveguides on silver surface

We report a study of a two-layer dielectric-loaded surface plasmon polariton waveguide (TDLSPPW) which consisted of two dielectric layers (high-index/low-index) on a silver film. The discontinuity of the electric field at the interfaces resulted in a concentrated field in the low-index region. It efficiently reduced the propagation loss of the surface plasmon polariton mode. The mode fields and corresponding complex propagation constants were calculated by a vector finite-difference method. The propagation properties were measured by a modified near-field optical microscope. It is confirmed that the propagation length of the proposed TDLSPPW was about 1.6 times longer than conventional single-layer SPP waveguides. In addition, a 90^° waveguide turn with 3 μm radius showed that the bending loss was smaller than 2 dB.     

Focused ion beam fabrication and magneto-electrical transport properties of La0.67Ca0.33MnO3 nanobridge

La_0.67Ca_0.33MnO₃ particle films with an average particle size of ~150 nm were grown on single-crystal silicon substrate using pulsed electron deposition technique and then focused ion beam was introduced to fabricate nanobridge in size of 300 × 900 nm on the particle film. The magneto-transport properties of both samples were studied. For the film, there is only one resistance peak at 182 K in temperature-dependent resistance (R–T) curves, which is far lower than ferromagnetic–paramagnetic transition temperature (T _C) of 250 K. When compared to the film, double peaks were observed in both R–T curves and magnetoresistance dependent on temperature (MR–T) curves of the nanobridge, one peak is at 186 K, which is very close to metal–insulator transition temperature (T _P) of film, the other one is at 250 K, which is close to the T _C of film, and these two peaks caused separately by grain and grain boundary (GB), which demonstrated that the electrical transport behavior of grain was separated from that of GB.     

4.75 keV能点四通道Kirkpatrick-Baez显微镜

基于CH柱形靶压缩实验的时间分幅诊断需求,研制了4.75 keV能点四通道Kirkpatrick-Baez(KB)显微镜。进行了四通道KB系统的光学设计、像质模拟和分析。采用支撑锥芯的方式解决了四通道KB物镜的集成装配问题,并通过4.75 keV+8 keV双能点多层膜完成了实验室内的KB系统装调。该套系统在神光Ⅱ装置成功进行了像质考核实验,获得了高分辨的四象限网格图像,成像间距符合设计要求,具备了开展时间分幅惯性约束聚变物理实验的条件。     

Direct Form I Realization of Active Photonic Filters

Abstract

An integrated photonic architecture is introduced and used to realize an optical filter with direct form I realization. The architecture offers gain from semiconductor optical amplifiers, and this gain results in an active optical filter whose filter response depends on the individual gains. The presence of gain provides advantages in filter performance, and tunable and adaptive functionality. The optical filter is modeled as a discrete time system and the z-transform is used in its analysis and design. A low-pass filter design example is presented and the filter coefficients are derived in terms of gains and coupler splitting ratios. The region of stable operations is derived by applying the Schur-Cohn stability test.     

Dielectric Barrier Discharge in Analytical Spectrometry

Abstract

Dielectric barrier discharge is a nonequilibrium plasma, and its industrial application has been on a large scale. Similarly, its prominent features of high dissociation ability at low working temperature and low power consumption, simple and adjustable configuration, ambient working conditions, and long lifetime are favorable for developing a wide array of analytical devices as well. This review addresses the basics of dielectric barrier discharge and emphasizes their analytical applications in analytical atomic spectrometry, chemiluminescence, gas chromatographic detectors, ion source for mass spectrometry, and ion mobility spectrometry with 103 references.