Field emission mechanism from nanocrystalline cubic boron nitride films

An electron-emission theoretical model integrating the change in the grain size of nanocrystalline cubic boron nitride (c-BN) thin films was established. To understand better the essence of field emission, an accurate numerical scheme, the transfer matrix method, that can be used to compute the tunneling coefficients of the actual surface barrier, was also adopted. The present results show that the emission current from nanocrystalline grain films is far larger than that from regular grain films or bulk c-BN.     

Effect of Stress State on Growth of Interfacial Intermetallic Compounds Between Sn-Ag-Cu Solder and Cu Substrates Coated with Electroless Ni Immersion Au

Excessive intermetallic compound (IMC) growth in solder joints will significantly decrease the reliability of the joints. IMC growth is known to be influenced by numerous factors during the component fabrication process and in service. It is reported that, other than temperature and holding time, stress can also influence the IMC growth behavior. However, no existing method can be used to study the effect of stress state on IMC growth in a controlled manner. This paper presents a novel method to study the effect of stress on interfacial IMC growth between Sn-Ag-Cu solder and a Cu substrate coated with electroless Ni immersion Au (ENIG). A C-ring was used and in-plane bending induced tensile and compressive stresses were applied by tightening the C-ring. Results revealed that in-plane compressive stress led to faster IMC growth as compared with in-plane tensile stress.     

高输入功率因数的三相无源AC-DC变换器

对于采用三相不控整流桥作为前级的变换器，自然条件下其输入电流波形系数不高，使得输入功率因数委低，降低了电源的利用率。为此需要采用功率因数提高技术，其中无源PFC是一类重要的功率因数校正技术，在某些场合非常具有应用价值。本文介绍了几种三相无源AC-DC变换器的高功率因数方案，如采用LC滤波器、移相电抗器，谐振电抗器，移相变压器，相间变压器，相间电抗器等，在进行简单的工作原理描述后，给出了部分方案的MATLAB/SIMULINK仿真结果。     

自伴算子代数上的某些*-自同态的σ-弱混合性

设A是希尔伯特空间H上的自伴算子代数,α是A上的*-自同态.如果存在单位向量e∈H,使得对任意α∈A和单位向量h∈H,有lim_(n→∞)〈α~n(a)h,h〉=〈αe,e〉成立,那么称α是A上的σ-弱混合的*-自同态.本文研究了这一有趣性质,并得到了一个*-自同态是σ-弱混合的充分条件.     

微型网状结构支架的力学性能研究

冠状动脉支架为圆柱形微型网状结构，直径1mm，厚度0．1mm，长度10～16mm。在经皮冠状动脉介入PCI治疗中由球囊充气撑开到直径为2．5～3．5mm的支架，在血管内承受血管壁回弹压力。为了保持血液流通支架必须保持其几何圆形。这是一个结构弹塑性稳定性问题。但是目前国际上对于支架的力学性能质量指标主要以强度性能评定而不涉及支架屈曲性能是不妥的。本文对于支架的强度和屈曲性能进行了全面的理论分析和实验研究，自行研制了智能式电子检测仪成功地对微型网状结构支架的强度和屈曲性能实现了实测实验研究。由于微型支架的离散型网状结构的特点，在实验中出现一些特殊的屈曲现象。本文研究结果对于支架的形状与性能设计的改进和力学性能质量标准规范的制订具有重要意义。     

旋转带电体磁矩计算的若干法则与算例

本文在文献 [1]、[2 ]等的基础上给出关于旋转带电体的磁矩计算的若干法则 ,均以定理形式表达 ,并列表枚举其相关算例     

一类非线性弹簧振子的周期性振动

本文用数值计算的方法讨论了一类非线性弹簧振子的周期性振动及其特点．     

FDTD Method in the Analysis of Lithium Niobate Modulator

The Mach-Zehnder traveling-wave lithium niobate modulator is simulated by time domain finite difference (FDTD)method for different device geometry. The result is comparable to the reported value by finite element method.     

A new property of Bernstein-Kantorovi? operators

In the present paper, we prove that the Bernstein-Kantorovič operators have the ability of preserving translation property in both C and L^p norms. Supported (in part) by the NSFC(10471130,10371024) of PRC and the Natural Science Foundation (Y604003) of Zhejiang Province.     

Power scaling of printed-circuit-board preionized TEA CO2 laser up to 3.6 kW

A high average power, high-repetition-rate TEA CO₂ laser employing printed-circuit-board preionizer is described. The power scaling of this preionization configuration has been demonstrated. The average output power reaches 3.6 kW at pulse repetition rate of 180 pps. Furthermore, the scaling-up ability of the rotating spark gap as high-voltage switch for high-average-power gas laser has been validated.