The Gemini surfactant 9B-4-9B containing sodium sulfonate as hydrophilic head group was synthesized based on nonylphenol and characterized by FTIR, 1H NMR spectroscopy and the surface tension measurement. The CMC and C20 of the 9B-4-9B were smaller than that of sodium dodecylbenzene sulfonate and sodium dodecylsulfate, respectively, indicating excellent efficiency of micelle formation and reduced surface tension. Conducting polyaniline salts were synthesized by chemical oxidative micellar polymerization of aniline in water firstly using Gemini surfactant 9B-4-9B as the micelle stabilizer and ammonium peroxydisulfate as the oxidant at 0 °C. The stable polyaniline dispersions have been obtained when the molar ratio of the 9B-4-9B to aniline was equal to or above 0.5 used in the polymerization system. The obtained granular polyaniline particles with the size of 1-2 μm were characterized by FTIR, UV-Vis, SEM, WAXD and conductivity measurement. 相似文献
The title compound, C30H46O9, prepared from a mixture of α‐ and β‐dihydroartemisinin, has α‐ and β‐arteether moieties linked via an –O– bridge, so that the molecule is asymmetric about the bridge. The endoperoxide bridges of the parent compounds have been retained in each half of the ether‐bridged dimer. The rings exhibit chair and twist–boat conformations. 相似文献
Cellulose nanofibril (CNF) aerogels have attracted great interests in recent years due to the low cost, sustainability and biocompatibility of raw CNF. However, the poor thermal stability and flammable feature of CNF aerogels have limited their wider applications. In this paper, polydopamine/CNF composite aerogels with good comprehensive properties are fabricated by modification of CNF with polydopamine and metal coordination bonds crosslinking. The microstructure and properties of composite aerogels are thoroughly characterized by a variety of tests. It is found that the microstructure of aerogels are more regular and the compressive strength of aerogels are enhanced by the incorporation of polydopamine and Fe3+ crosslinking. Importantly, the thermal stability and flame resistance of aerogels are significantly improved, which permit the application of composite aerogels in high-temperature thermal insulation. In addition, the reversible characteristic of metal coordination bonds allows the water induced healing of fractured composite aerogels. This study is expected to provide information for future development of green and high-performance aerogels.
High molecular weight copoly(ether ketone)s (PEK) based on 4-(4-hydroxyphenyl)-1-phthalazinone (DHPZ)/4,4′-thiobisphenol (TBP)/4,4′-diflourodiphenylketone (DFK) were prepared by nucleophilic substitution polycondensation. The copolymers were characterized by FT- and ^1H-NMR. Thermal properties and solubility of copolymers were studied. 相似文献
Novel dense composite adsorbents for expanded bed adsorption of protein have been fabricated by coating 4% agarose gel onto Nd-Fe-B alloy powder by a water-in-oil emulsification method. Two composite matrices, namely Nd-Fe-B alloy-densified agarose (NFBA) gels with different size distributions and densities, NFBA-S (50-165 microm, 1.88 g/ml) and NFBA-L (140-300 microm, 2.04 g/ml), were produced. Lysozyme was used as a model protein to test the adsorption capacity and kinetics for the NFBA gels modified by Cibacron blue 3GA (CB-NFBA gels). Liquid-phase dispersion behavior in the expanded beds was examined by measurements of residence time distributions, and compared with that of Streamline SP (Amersham-Pharmacia Biotech, Sweden). The dependence of axial mixing in the expanded beds on flow velocity, bed expansion degree. settled bed height, and viscosity of liquid phase was investigated. Breakthrough curves of lysozyme in the expanded beds of the CB-NFBA gels were also examined. The dynamic binding capacity at 5% breakthrough was 23.3 mg/ml matrix for the CB-NFBA-S gels, and 16.7 mg/ml matrix for the CB-NFBA-L, at a flow velocity of 220 cm/h. The results indicate that the NFBA gels are promising for expanded bed adsorption of proteins. 相似文献
A new method for speciation analysis of two inorganic selenium species was developed by on-line coupling of capillary electrophoresis (CE) with hydride generation-atomic fluorescence spectrometry (HG-AFS) and on-line conversion of Se(VI) to Se(IV). Baseline separation of Se(VI) and Se(IV) was achieved by CE in a 50 cm x 75 microm inside diameter (ID) fused-silica capillary at -20 kV using a mixture of 15 mmol.L(-1) NaH2PO4 and 0.5 mmol.L(-1) cetyltrimethylammonium bromide (pH 7.5) as electrolyte buffer. Se(VI) was on-line reduced to Se(IV) by mixing the CE effluent with concentrated HCl. The precision (relative standard deviation, RSD, n=7) ranged from 0.7 to 1.3% for migration time, 6.4 to 3.7% for peak height response, and 5.9 to 6.1% for peak area for the two selenium species at the 500 microg.L(-1) (as Se) level. The detection limits were 33 and 25 microg.L(-1) (as Se) for Se(VI) and Se(IV), respectively. The recoveries of the two selenium species in five locally collected water samples ranged from 88 to 114%. The developed method was applied to speciation analysis of inorganic selenium species in spiked natural water samples. 相似文献
Using the self-assembly β-cyclodextrin (β-CD) and cetyltrimethylammonium bromide (CTAB) as structure-directing agents, high-quality ordered MCM-41 silicas have been prepared. Small-angle X-ray diffraction (SXRD), N2 adsorption-desorption and scanning electron microscope (SEM) techniques were used to characterize the calcined samples. Results showed that the pore structure of the resulting mesoporous silica belonged to the two-dimensional hexagonal structure (space group p6mm). The high-quality hexagonal structure was formed as n?1 (n denotes molar ratio of β-CD to CTAB). N2 adsorption-desorption curves revealed type IV isotherms, H4 hysteresis loops, for all samples, and H1 hysteresis loops for samples at n=0, 0.1, 1 and 2, respectively. The pore size and the pore wall thickness of the samples increased with the increase in n values, respectively. 相似文献
Thermosensitive copolymers of N-vinyl carprolactam with N,N-dimethylaminoethyl methacrylate have been synthesized via free-radical polymerization, and reactivity ratios in dioxane have been estimated as 2.44 and 0.07, respectively. It has been shown that temperatures of phase separation for 1% aqueous solutions of homopolymers are close and remain virtually unchanged with the copolymer composition. The efficiency of flocculating behavior of copolymers with respect to a polystyrene latex has been estimated from the initial rate of flocculation as a function of the polyelectrolyte concentration in an acidic medium. 相似文献
A photometric method for hydrogencarbonate determination in various natural waters is presented, based on measurements with methyl red. Accuracy of the results is demonstrated by comparison with titrimetric and ion-chromatographic methods. The photometric method is suitable for contents in the range of 1–2000 mg l?1. The linear range of the continous flow method varies form 6–60 mg l?1 to 12–90 mg l?1 depending on conditions. 相似文献