SDH中泊松分布下误块率与误码率的关系分析

本文较详细地介绍了ＳＤＨ中的ＢＩＰ误码校验方式，推导了泊松分布下，ＢＩＰ误块率与误码率的一般关系式，给出了ＳＤＨ中几种典型的误块率与误码率的关系曲线，并做了计算机模拟验证     

Supersemiprime Rings and Supersemiprime Radical

§1.　IntroductionInthisrecentyears,theprimeringswithspecialpropertieshavebeenstudiedsomeau-thors,forexample,N.T.Groenewaldintroducedthecompletelyprimeringsandthecompletelyrimeradicalin[1].D.HandelmanandJ.Lawrencediscussedthestronglyprimeringsandthestronglyprimeradicalin[2].S.Veldsmanstudiedthesuperprimeringsandthesuperprimeradicalin[3].ZhangXianjunintroducedtheAbsolutelysemiprimeringsandtheabsolutelysemiprimeradicalandsoon.Theaimofthispaperistostudythesemiprimeringswithspecialpropertiesan…     

不同激发密度下CdS晶体的光致发光和受激发射

本文主要研究在77-111K温度范围内、不同激发密度的N2激光器的337.1nm谱线激发下,激子-激子(Ex-Ex)、激子-载流子(Ex-e)的相互作用和发射一个LO声子(Ex-1LO)、两个LO声子(Ex-2LO)的自由激子的辐射复合行为.并在77K温度下观测到由Ex-Ex发射产生的受激发射.     

N2（A）及N（2D）对IF（X）的传能研究

在微波放电系统中,对NH_3-F-F_2-CF_3I体系进行研究,结果表明,向IF(X)传能的诸多媒介中,N_2(A)及N(~2D)起着主要作用,并且这一结论在经微波激发后的N_2与CF_3I的直接反应中得到了进一步证实。     

稳态锁模产生4ps激光脉冲

首次利用ＧａＡｓ光电导开关，控制Ｎｄ：ＹＬＦ激光器腔内Ｑ值，实现稳态锁模，获得脉宽和能量稳定性极高的４ｐｓ激光脉冲。     

Study on reproductive endocrinology of human placenta (III)--Hormonal regulation of progesterone production by trophoblast tissue of first trimester.

The effect of hormones on progesterone secretion by 6-8 week human trophoblast tissue cultured in serum-free medium has been investigated. GnRH at low concentration (10(-10)-10(-8) mol/L) stimulated progesterone secretion, while high dose (10(-6)-10(-5) mol/L) produced inhibitory effect. The progesterone secretion could be significantly decreased by addition of anti-hCG antiserum or monoclonal anti-hCG IgG in a dose- and time-dependent manner. Various concentrations of TRH, PGE2, PGF2 alpha, testosterone and estradiol were found to be ineffective. These data indicate clearly that progesterone production by human trophoblast tissue at early gestation stage is under the modulation of GnRH and hCG.     

海浪谱的光学探测及信息处理

建立了一套光学——计算机混合处理系统用以分析海浪航空底片,并得到了海浪方向谱和能谱。实验结果与现有的海浪理论符合较好,同时显示了该方法有可能发展成一种实用的实时海浪探测方法。     

苯对N,N-二甲基甲酰胺化合物~1H NMR的影响研究

本文研究了N,N-二甲基甲酰胺(DMF)在四氯化碳和苯混合溶剂中的~1H NMR。观察到N,N-二甲基甲酰胺(DMF)分子中两个甲基和混合溶剂中苯的共振吸收峰的化学位移随苯的摩尔分数增加而逐渐移向高场,而且两个甲基共振吸收峰向高场移动的程度不同,α甲基较β甲基为甚。DMF分子中两个甲基和混合溶剂中苯的化学位移可以用线性方程表示(δ=A+Bx),这里x是混合溶剂中苯的摩尔分数。相关系数R接近于-1。     

5,10-二(对-氨基)四苯基卟啉和吖啶黄之间激发能量的传递

利用Forster能量传递机制,研究了氯仿溶液中吖啶黄向5、10-二(对-氨基)四苯基卟啉(简称TBP)的激发能量传递和TBP.浓度变化时对能量传递速度常数的影响.实验结果表明,吖啶黄和TBP之间具备能量共振传递的条件,并且计算了能量共振传递的临界距离为0.42nm、传递效率为0.72和传递速度常数为1.42×107s-1.这些数据对复合膜光电转换器件的设计将具有重要意义.     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007