Giant viscosity enhancement in a spin-polarized fermi liquid

The viscosity is measured for a Fermi liquid, a dilute 3He-4He mixture, under extremely high magnetic field/temperature conditions (Bor=1.5 mK). The spin-splitting energy microB is substantially greater than the Fermi energy kBTF; as a consequence the polarization tends to unity and s-wave quasiparticle scattering is suppressed for T相似文献   

The effect of applied negative bias voltage on the structure of Ti-doped a-C:H films deposited by FCVA

Ti-doped hydrogenated diamond-like carbon (DLC) films were deposited on Si(1 0 0) substrates by a filtered cathodic vacuum arc (FCVA) method using Ar and CH₄ as the feedstock. The composition and microstructure of the films were investigated by Raman spectroscopy, X-ray photoelectron spectroscopy and IR spectroscopy. The internal stress was determined by the radius of curvature technique. The influence of the bias voltage on the microstructure of the as-deposited films was investigated. It was found that the graphite-like bonds was dominated in the Ti-doped DLC film deposited at 0 V bias voltage. When bias voltage was increased to −150 V, more diamond-like bond were produced and the sp³ content in film reached the maximum value, after which it decreased and more graphite-like bonds feature produced with further increase of the negative bias voltage. The compressive internal in the Ti-doped DLC films also exhibited a maximum value at −150 V bias voltage. IR results indicated that CH bonded intensity reduced, and H atoms bonded with C atoms were substituted for the Ti atoms as the negative bias voltage increasing. All the composition and microstructure change can be explained by considering the plasma conditions and the effect of negative bias voltage applied to the substrate.     

Critical behavior of a passively mode-locked laser: rational harmonic mode locking

The critical behavior of passive mode locking has been demonstrated in a figure-eight fiber laser that performs rational harmonic mode locking (RHML). On both the repetition rate and the pulse amplitude distribution, the observed pulse trains near the threshold exhibit the same regulations as the rational harmonic mode-locked ones. The theory also shows that there should be a middle status of RHML before achieving normal mode locking. It is important to note that the results provide what we believe to be the first confirmed attempt to address a fundamental question: how does a laser become mode locking with an increase of pump power?     

Ablation induced by single-and multiple-femtosecond laser pulses in lithium niobate

We present results on the surface-damage threshold of lithium niobate after single-and multiple-femtosecond laser pulse irradiation at the pulse duration of 80 fs, with a 800-nm wavelength, and a repetition rate of 1 kHz. The surface-ablation threshold was found to decrease significantly with an increase in the pulse number applied to the surface until reaching an almost constant level due to an incubation effect, which is attributed to the laser-induced defect formation. The threshold of lithium niobate under a single shot is found to be 2.82 J/cm², and the threshold fluence for an infinite number of pulses F _th(∞) converges to a common value of 0.52 ± 0.06 J/cm² for N > 80. The results have the potential for application in laser micromachining and the fabrication of related optical devices and applications in frequency conversion by a femtosecond laser in lithium niobate.     

A New Sesquiterpene from the Roots of Chloranthus multistachys

Chemistry of Natural Compounds - A new sesquiterpene, 1β-hydroxy-4(5),7(8),11(12)-triene-6,9-dione-7,8-furanoeudesmane (1), was isolated from the root extract of Chloranthus multistachys C....     

HZSM-5分子筛中邻近酸中心上的协同催化作用

总结了HZSM-5分子筛中邻近的酸中心协同催化作用的研究进展, 包括布朗斯特酸(B酸)和路易斯酸 (L酸)的协同催化、 B酸和B酸的协同催化作用. 综述了通过多种表征手段下协同催化作用机理的研究进展, 以及实验与理论计算相结合并相互验证的研究结果, 对邻近酸中心协同作用下反应分子的共同吸附、 活化与转化路径的特点进行了分析与总结, 提出了对邻近酸中心协同催化作用进行深入研究的关键科学问题和可能的解决方案.     

酰胺连接的共价有机骨架的制备及其在水中高效光催化性能

光催化是将太阳能转换为化学能的绿色可持续发展途径,有望解决日益严重的能源危机和环境污染问题.在光催化过程中,半导体材料作为光催化剂,负责可见光的捕获、光生载流子的生成和传输以及氧化还原反应,在整个光催化系统中起着决定性的作用.共价有机骨架材料(COFs)是一类新兴的半导体光催化剂,已被证明在可见光诱导的水分解、二氧化碳还原、有机转化反应和水中污染物降解方面具有应用前景.然而,大部分COFs是通过可逆反应构筑的,在水中及苛刻条件下的稳定性差.因此,提升基于COFs的光催化剂在水相中的光催化活性和循环稳定性仍然面临巨大挑战.本文提出了一种新策略,即通过实现多重协同效应,设计和开发2D-COFs作为在水中的高效非均相光催化剂.通过后合成策略将亚胺键连接的2D-COFs氧化,制备了两种具有丰富三嗪结构单元的以酰胺键连接的2D-COFs(命名为COF-JLU18和COF-JLU19).结果表明,COF-JLU18和COF-JLU19具有高比表面积和孔体积,其比表面积分别为1156和541 m2/g;COF-JLU19具有比相似拓扑结构的亚胺COF-JLU17更好的水蒸气吸附性能.此外,COF-JLU19表现出了极高的化学稳定性,在水中、盐酸和氢氧化钠溶液中浸泡两天,其结构和结晶性均没有发生明显变化.由此可见,酰胺键不仅可以增加材料骨架的亲水性,还能够提高COFs对水的稳定性.本文制备的酰胺键连接的COF-JLU19材料,在光降解罗丹明B水溶液(RhB)反应中可以获得高达0.69 min?1的光降解速率常数,活性明显优于其他光催化剂,如C3N4等.COF-JLU19具有较好的催化活性主要归因于以下两方面:一方面,良好的亲水性和固有孔隙率之间的协同效应可以增强COFs在水中对染料的吸附能力,使其光催化活性得到有效提升;另一方面,高的结晶度和优秀的稳定性使酰胺键连接的COFs在多相光催化中实现稳定循环利用.为了扩展COFs的应用前景,本文还制备了一种基于酰胺键连接COFs的静电纺丝膜,在以太阳光为光源的光降解罗丹明B水溶液实验中表现出较高的光催化活性和重复使用性.综上,本文提出的多重协同效应为基于COFs的高效光催化剂的设计提供了一种有效策略.     

提高金属有机骨架材料在二氧化碳热催化转化中的性能:策略及前景展望

近年来,大气中CO2的浓度不断增加,带来全球变暖等一系列严重后果,成为国际社会共同关注的环境问题.将CO2催化转化为高附加值化学品可有效降低其向大气中的排放,同时可实现其资源化利用,符合低碳社会的发展目标.目前,已有多种催化体系实现了CO2向不同化学品的转化.然而,由于CO2自身的热力学稳定性和动力学惰性,这些转化通常需要在苛刻的反应条件和较高能耗下进行.设计开发高效催化体系、实现温和条件下CO2的转化利用引起了工业界和学术界的广泛兴趣.金属有机骨架材料(MOFs)是一类由有机配体和金属中心通过配位键组装而成的有机-无机杂化材料,在很多方面展现出良好的应用性能.由于其结构的多样性、可设计性、高比表面积和多孔性等独特性质,MOFs在催化领域吸引了很多研究者的关注.其中,MOFs作为非均相催化剂在CO2热催化转化中表现出良好的应用前景,已实现多种CO2向高值化学品的转化路径.但这些催化体系也存在一些缺点,如有些MOFs材料在催化反应中稳定性差以及其微孔性对反应中的传质造成限制等.因此,设计稳定的MOFs和MOF-基材料并对其结构进行优化改性,从而在温和条件下实现高效的CO2转化具有重要意义.本文综述了提高MOFs在CO2热催化转化反应中性能的几种策略:(1)对MOFs结构中的配体进行设计,包括具有活性官能团的配体、活性配合物作为配体和引入混合配体设计多元MOF;(2)调节MOFs结构中的金属中心,设计混合金属中心和包含活性金属团簇的金属中心;(3)构筑多级孔MOFs;(4)设计MOF-基的复合材料,包括MOFs作为载体与金属纳米颗粒、活性配合物和聚合物构建复合材料;(5)利用MOFs作为前驱体制备MOF-基衍生物材料,重点阐述了如何增加MOFs作为非均相催化剂的催化活性位点以及在CO2转化反应中各位点之间的协同作用.此外,介绍了原位表征技术在MOF-基材料用于CO2固定和转化中的应用.最后,分析了MOF-基非均相催化材料在CO2热催化转化领域目前面临的问题和挑战,包括MOFs材料结构优化、催化机理研究和规模化制备等方面,并对未来的发展趋势进行了展望.     

Syntheses,crystal structures and magnetic properties of two new cyano-bridged bimetallic complexes

Transition Metal Chemistry - Two complexes [Fe(1,10-phen)2Ni(CN)4]n (1), {[Fe2(1,10-phen)4(CN)4Co2(1,10-phen)2Fe(CN)6]·2H2O}n (2) were prepared in the reaction of K3[Fe(CN)6] as cyanometalate...