非弹性体增韧—聚合物增韧的新途径

本文是一篇关于非弹性增韧方法的综述。文章首先简要回顾了传统的橡胶增韧韧性聚合物材料的机理,然后着重介绍了最近在国外出现的刚性有机填料(ROF)增韧的基本概念、分析方法和增韧的冷拉机理,列举了脆性塑料粒子和韧性基体组成的合金体系的大量实验结果来说明以上内容,最后通过与传统橡胶增韧机理的对比指出非弹性体增韧是不同于后者的一种新增韧方法,并有可能成为制备高强度、高韧性工程塑料的一种新途径。     

A novel three-dimensional coordination polymer [Cd2(C3H2O4)2(H2O)2(μ 2-hmt)] n (hmt = hexamethylenetetramine): synthesis and crystal structure

The self-assembly of the Cd^II ion, hexamethylenetetramine (hmt) and malonate ligand yields a three-dimensional (3D) coordination polymer [Cd₂(C₃H₂O₄)₂(H₂O)₂( ₂-hmt)] _n with channels. The Cd^II ion is located in a octahedral coordination environment, composed of four oxygen atoms from three malonates, one oxygen atom of water and one nitrogen atom of hmt. Two oxygen atoms of each malonate coordinate to the same Cd^II ion and the other two oxygen atoms connect to adjacent two Cd^II ions respectively to form a two-dimensional infinite network, these networks are bridged by ₂-hmt coordinated to Cd^II ions to product a 3D architecture.     

氧化还原酶催化合成芳香聚合物的研究进展

主要概括了近年来以典型的氧化还原酶包括辣根过氧化物酶，大豆过氧化物酶和漆酶等催化合成苯酚，双酚，蒽醌类聚合物，苯胺类聚合物，聚苯醚等聚芳香族功能高分子材料的研究进展，并对多酶法与化学酶法的酶促合成作了介绍。     

Increase of Calcium Levels at Interphase in NIH 3T3 Cells

The fluorescent calcium ion indicator dye Fluo-3 and DNA-binding dye Hoechst 33342 were employed to determine, in a quantitative microspectrofluorometric study, the intracellular calcium ion concentration ([Ca~(2+)]_i) and the DNA content of individual living NIH3T3 cells. The well-separated excitation and emission properties of these dyes allowed us to establish for each cell both the phase of the cell cycle using DNA content and [Ca~(2+)]_i. We found that the transition from G_1, through S, to the G_2 phase is accompanied by a two-fold increase in [Ca~(2+)]_i. The [Ca~(2+)]_i was inhomologous in each phase of the interphase (G_1, S and G_2) although [Ca~(2+)]_i in the S and G_2 phases was never lower than certain threshold values in the G_1 and S phases respectively. [Ca~(2+)]_i in G_0 cells was lower than that in G_2 cells. These changes in [Ca~(2+)]_i suggest that [Ca~(2+)]_i may be an import regulator of cell cycle progression.     

Deposition of Layer－by－layer Inorganic－organic Nano－hybrid Ultrathin Films onto SBA－15

Deposition of inorganic-organic nano-hybrid ultrathin films onto mesoporous silicate materials has been proven possible by using layer-by-layer assembly method. In combination with sol-gel method, titania, subsequently dye molecules (or polymer) were successfully fabricated onto the inner wall of SBA-15. Their structures were preliminarily characterized by FTIR and solid-state UV-Vis spectroscopy, thermal analysis, and BET surface area measurements,respectively.     

AB5型球形合金粉的表面处理研究

由雾化（Gas－atomization）技术制备的AB5型球形合金粉，作为镍氢电池负极材料具有很多优点：粉粒呈球状便于在多孔基片内装填；耐压耐磨性好；抗碱能力强且不易解胶．但它的电化学初活性差，难于活化．有碍电池中的应用．采用适宜的氧化剂（铜盐水溶液）处理，使球粒表面形成一个富铜、富镍亚层，显著地改善了合金粉的电化学活性．经处理的MlNi3.8CO0.5Mn0.3Al0.4球形合金粉，仅3次充放电循环其放电量便可达到240mA·h·g-1；而未经处理的同一合金粉即便经6次充放电循环其放电量也只有103mA·h·g-1．     

钠硼硅酸盐玻璃分相及浸析的NMR研究

用多种ＮＭＲ方法，包括＾２９Ｓｉ、＾２３Ｎａ，＾１１Ｂ ＭａＳ及＾２９Ｓｉ ＣＰ／ＭＡＳ ＮＭＲ，研究了一定组成的ａ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２三元体系玻璃在不同温度下分相处理２４小时及用酸浸析处理后的结构变化。结果表明，在低于分相上界临界温度的范围内，存在着一个温度转折点，低于这一温度时，受动力学因素影响，分相未达平衡态，温度愈低，距平衡态愈过，分相愈下完全。超过这一温度，分相可达平衡态，受热力学控     

甲基丙烯酸－N，N－二甲氨基乙酯及其聚合物的热和pH响应性

Dimethylaminocthyl methylacrylate (DMAEMA) and its polymer exhibit thermo-sensitive response. The phase separation of their aqueous solution occurs abfruptly when the raising temperature reachs certain degrees. Thus, the temperature of phase separation of 10%,5.0%,2.5%,1.0%(DMAEMA) solution are 40.2,42.5,44.5,52.4℃ respectively. The thermosensitive phase separation also depends on the acidity of solution. The temperature and pH dependence swelling behavior o f slightly crosslinked P(DMAEMA) in water was studied. The adsorption of met-hyl orange for P(DMAEMA) at different temperature was investigated. P(DMAEMA) can he expected as a functional material with thermal and pH-response.