中继通信无人机天线自动跟踪平台设计

为了进一步扩展微小型无人机中继通信的覆盖范围,提高通信带宽和通信质量,设计研制了基于信号接收强度（RSSI）盲估计跟踪的天线自动跟踪平台,通过实时获取通信接收机的RSSI实现地面定向天线对中继无人机的动态跟踪。采用卡尔曼滤波算法对提取的RSSI信号进行优化处理;利用矩形扫描方式提高初始捕获速度;利用单天线步进式“十字”跟踪方法完成天线动态跟踪。设计了自动跟踪平台的软硬件并进行了测试,结果表明：设计的跟踪平台具有较好的跟踪速度与跟踪精度,能满足无人机对定向天线自跟踪的需要。     

一种硅基MEMS微波SIR交指带通滤波器

基于7阶SIR交指结构滤波器,提出了一种基于硅MEMS技术的微波S波段交指带通滤波器。不仅保留了交指结构的高通带选择性,而且可以通过调整SIR的阻抗比和电长度比来实现宽阻带。采用MEMS工艺,在双层高电阻率的硅片上完成了滤波器的制作和自封装,它具有体积小、损耗低的优点。仿真结果表明,该滤波器在中心频率2.35 GHz处的相对带宽为30%,带内插损小于1.5 dB,回波损耗大于15 dB,在频率f0±0.8 GHz处的阻带抑制比大于50 dB。该交指带通滤波器的体积仅为(11×7×0.8)mm³。     

超高色域图案化量子点彩膜的研究

平板显示中影响色域的两个关键因素为背光源发光光谱特性和彩色滤光片的透过光谱特性。在TFT-LCD的高色域领域,为了实现BT2020标准,我们开发了量子点光刻胶替代彩色滤光片的方法。首先合成新型的量子点光刻胶,将其作为色彩转换膜制备在彩色滤光片下方,通过背光激发量子点自发光,可得到色纯度更高的红绿光。研究表明,自主开发的量子点光刻胶可以有效地进行色转换,可耐受光刻工艺,在高温烘烤和碱性显影下,可保持一定转换效率,且能实现pattern化,避免目前用白光直接搭配彩膜的漏光问题,有效地提高色域。     

含分布式电源的配电网保护与控制实验平台的开发

本文介绍了一种含分布式电源的配电网保护与控制实验平台实现方法,分析了一次与二次系统实现架构,并以孤岛保护功能实现为例,分析了实验设计思路,实践效果良好.     

基于网络环境的"自动控制原理"教学模式改革

本文以"自动控制原理"课程为研究对象,以网络环境为依托,从教学内容、教学方法、实践环节以及考核方法等四个方面进行改革与实践.结果表明,新的教学模式,更能激发学生的学习热情,提高教学质量.     

电子信息工程专业"三自主"教学模式

以往的教学模式在很大程度上抑制了具有创新潜能的学生们的主观能动性.本文在深刻认识教学现状的基础上,提出了"自主课程学习、自主项目研究、自主考核评价"的"三自主"教学模式,并在我校电子信息工程专业就该教学模式进行了一系列的教学改革实践,取得了初步的成效.     

Semantic image segmentation with fused CNN features

Semantic image segmentation is a task to predict a category label for every image pixel. The key challenge of it is to design a strong feature representation. In this paper, we fuse the hierarchical convolutional neural network (CNN) features and the region-based features as the feature representation. The hierarchical features contain more global information, while the region-based features contain more local information. The combination of these two kinds of features significantly enhances the feature representation. Then the fused features are used to train a softmax classifier to produce per-pixel label assignment probability. And a fully connected conditional random field (CRF) is used as a post-processing method to improve the labeling consistency. We conduct experiments on SIFT flow dataset. The pixel accuracy and class accuracy are 84.4% and 34.86%, respectively.     

A six-junction GaAs laser power converter with different sizes of active aperture

We investigate a novel GaAs-based laser power converters (LPCs) grown by metal-organic chemical vapor deposition (MOCVD), which uses a single monolithic structure with six junctions connected by tunnel junctions to obtain a high output voltage. The LPCs with diameters of active aperture of 2 mm and 4 mm were fabricated and tested. The test results show that under an 808 nm laser, two LPCs both show an open circuit voltage of above 6.5 V. A maximum power conversion efficiency of 50.2% is obtained by 2 mm sample with laser power of 0.256 W, and an output electric power of 1.9 W with laser power of 4.85 W is obtained by 4 mm sample. The performances of the LPCs are deteriorated under illumination of high flux, and the 4 mm sample shows a higher laser power tolerance.     

Fabrication and performance analysis of a high-coupling- efficiency and convenient-integration optical transceiver

An optical transceiver with a novel optical subassembly structure is proposed in this paper, which achieves high coupling efficiency and low assembly difficulty. The proposed optical transceiver consumes 0.9 W power and retains a small size of 28 mm×16 mm×3 mm. The fabrication process of the silicon substrate and the assembly process of the optical transceiver are demonstrated in details. Moreover, the optical transceiver is measured in order to verify its transmission performance. The clear eye diagrams and the low bit error rate (BER) less than 10-13 at 10 Gbit/s per channel show good transmission characteristics of the designed optical transceiver.     

N-[5-(2-氯苯基)-2-呋喃甲酰氨基硫羰基]-L-α-氨基酸乙酯的合成与生物活性测定

设计并合成了9种未见文献报道的N-(5-邻氯苯基-2-呋喃甲酰氨基硫羰基)-L-α-氨基酸乙酯衍生物,其结构经IR,1H NMR,MS和元素分析测试确证.MTT法测试结果表明大部分目标化合物对白血病K562细胞系的增殖具有明显的抑制作用.