Preparation, Characterization and Catalytic Properties of S2O8^2-／ZrO2 Supported by Tungsten Carbide

A WC-supported S2O8^2-/ZrO2(PSZ) catalyst was prepared and characterized by means of XRD, BET, FTIR and XPS. The isomerization of n-pentane over the catalyst was investigated as well. The results show that the skeletal isomerization and the crack of n-pentane proceed simultaneously on WC-supported S2O8^2-/ZrO2 catalyst. The addition of tungsten carbide showed a significant enhancement in the activity and stability of the catalyst for n-pentane isomerization. The catalyst showed evidently a better activity than S2O8^2-/ZrO2 supported by Pt and WO3. The results can be interpreted by the existence of the tungsten oxycarbide compound(WCxOy) with carbidic, oxide and acidic sites.     

正丁烷氧化制顺酐流化床催化剂的性能

 考察了前驱体制备过程中水合肼／五氧化二钒摩尔比（以下简记\r\n为n（N2H4）／n（V2O5））对催化剂性能的影响．由较高的n（N2H4）\r\n／n（V2O5）比制得的催化剂，其（VO）2P2O7相含量较多，正丁烷转化\r\n率较高．随着n（N2H4）／n（V2O5）比的减小，δ－VOPO4相的含量逐\r\n渐增多，正丁烷转化率随之升高；而顺酐选择性开始时升高，达到最大\r\n值后逐渐降低．在n（N2H4）／n（V2O5）＝0．34时制备的催化剂最佳\r\n，在丁烷浓度为4．0％、空速为500h－1及反应温度为420℃的反应条件\r\n下，顺酐收率可达49．74％．本文中细粒床催化剂有较大的操作弹性．     

Determination of Size Distribution of Nano-particles by Capillary Zone Electrophoresis

A new method was developed for the determination of the size distribution of nano-particles by capillary zone electrophoresis (CZE). Scattering effect of nanoparticles was studied. This method for the determination of size distribution was statistical.     

杨村烟煤快速液化反应性的研究

用共振搅拌反应器研究了杨村烟煤的高温快速液化。研究发现，在体系保持较高活性氢浓度时，适当提高反应温度，缩短反应时间——在短时间内达到较高的煤转化率,即高温快速液化是可行的。高温快速液化的最佳反应温度正是热重曲线反映的煤活泼热解温度范围的上限。从液化产物看，高温快速液化反应产物中苯可溶物占绝大多数，这对于煤液化产物的进一步利用非常有利。     

纳米晶PbTiO3负载CuO催化NO分解

A large specific surface area perovskite-type mixed oxide PbTiO₃ supported cupric oxide was synthesized as a catalyst for NO decomposition and characterized by techniques such as XPS, XRD, H₂-TPR before and after NO decomposition reactions. The catalytic properties were tested with a fix-bed micro-reactor. The results showed that the PbTiO₃ was inactive for the reactions, but 1wt % Cu/PbTiO₃ catalyst gave fairly good activities for NO decomposition at temperature as low as 473 K. Copper species were found well-dispersed but weakly interacted with the support before NO decomposition, and the NO decomposition caused significant change in the environment of the copper species, which became Cu(Ⅰ) and most probably incorporated into surface crystal lattice of the nano-sized PbTiO₃. In NO reaction, a large amount of oxygen atoms from the decomposition of NO penetrated into the nano-sized PbTiO₃ support and caused small expansion of crystal lattice. The transport of oxygen between the copper species and the catalyst support may be helpful to speed up the kinetic regeneration of active metal sites from oxygen occupancy and resulted in good catalytic performance.     

Isolation, Mapping, DNA Sequence and RFLPs Studies of Random Single-Copy DNA Segments on Human X Chromosome

Using the total human/mouse DNA as the probe, screening has been carried out three times with in situ plaque hybridization to obtain the single-copy DNA sequence from the human X chromosome genomic library. The effective rate of screening is 1. 45%. DNAs from clones containing single-copy inserts have been analyzed by a panel of hybrid cells with or without human X chromosome. Three segments, designated by DXFD52,73,75, are mapped to the X chromosome. DXFD52 has been precisely localized on Xq12-q13 with in situ chromosomal hybridization. DXFD52 has been partially sequenced. The results indicate that DXFD52 is a new isolated single-copy segment on the X chromosome. Great progress in the RFLPs study with DXFD52 has been achieved in the population of Chongqing, Sichuan Province. The results show that the DXFD52 can be used to detect the RFLP with Hind Ⅲ, Bgl Ⅱ, and Hinf Ⅰ. DXFD52 will be a potential "landmark" for the construction of the complete linkage map of human genome and the analysis of genomic s     

Tuning the band gap of the CIGS solar buffer layer Cd1-xZnxS (x=0—1) to achieve high efficiency

To evaluate the impact of zinc sulfate (ZnSO4) concentration on the structural properties of the films, Cd1-xZnxS thin films were formed on glass substrates using chemical bath deposition (CBD) in this study. The effect of ZnSO4 precursor concentration on the surface morphology, optical properties, and morphological structure of the Cd1-xZnxS films was investigated. To study the impact of zinc doping content on the performance metrics of Cu(In1-xGax)Se2 (CIGS) cells in the experimental group and to improve the buffer layer thickness, simulations were run using one-dimensional solar cell capacitance simulator (SCAPS-1D) software.     

4G载波向5G重耕之前的5G业务覆盖能力研究

为了满足低成本建设5G广覆盖网络的需求,需要提前研究低频3G、4G网络向5G重耕的最佳方案。在没有进行重耕,因而没有理想的低频5G测试环境的情况下,采用理论分析的手段进行重耕后的覆盖能力估算。以未来L900重耕用于5G广覆盖为例,探讨了链路预算的关键设定、模型选择等问题,并通过多个本地网实际测试数据间接验证估算结果的合理性。所得结论已实际应用于某大运营商对全国900 MHz网络的规划方案,对于指导网络重耕具有重要的借鉴意义,也为面向覆盖和感知的6G网络演进及重耕提供了参考模型。     

一种基于介质加载的地球覆盖波束天线设计

地球覆盖波束天线为低轨卫星与地面终端之间的数据传输建立了通道,文中研究了一种新型的介质 加载地球覆盖波束天线。基于介质加载的方法,文中提出了一种圆极化地球覆盖波束天线设计,该天线由馈电网 络、馈源和介质三部分组成,介质包括底部圆柱部分和顶部半球部分,馈源集成于介质内部。设计的地球覆盖波束 天线工作在C 波段,轴向0°~64°范围内增益在0 dBic 以上,40°方向增益为5. 2 dBic。天线尺寸紧凑,辐射波束具有 较好的空间截止特性,可满足立方星应用。     

Structural, electrochemical and cycling properties of Nb5+ doped LiNi0.8Co0.1Mn0.1O2 cathode materials at different calcination temperatures for lithium-ion batteries

LiNi0.8Co0.1Mn0.1O2 cathode material is prepared by sol-gel method and the effects of Nb5+ doping and different calcination temperatures on cathode materials were deeply investigated. Structural and morphological characterizations revealed that the optimal content of 1 mol% Nb5+ can stabilize layered structures, mitigate Ni2+ migration to Li layers, improve lithium diffusion capacity, and reduce lattice expansion/shrinkage while cycling. And calcination temperature at 800 °C can not only ensure good morphology, but also suppress the mixed discharge of lithium and nickel in the internal structure. Electrochemical performance evaluation revealed that Nb5+ doping improves the discharge-specific capacity of the material, which is conducive to ameliorating its rate capability and cycle performance. And the material at 800 °C exhibits the highest discharge specific capacity, the best magnification performance, low polarizability, and the best cycle reversibility.