Simultaneous Determination of Glyphosate,Glufosinate, and Aminomethylphosphonic Acid by Capillary Electrophoresis After 9‐Fluorenylmethyl Chloroformate Derivatization

A capillary electrophoresis (CE) with UV absorption detection method is described for the simultaneous determination of glufosinate, glyphosate, and aminomethylphosphoric acid. The 9‐fluorenylmethyl chloroformate (FMOC‐Cl) was used for precolumn derivatization of the non‐absorbing herbicides. The three analytes were separated by CE in 9 min with 25 mM borate buffer at pH 9, followed by detection with a UV detector at 260 nm. We demonstrate how the detection limit can be enhanced by using acetonitrile‐salt mixtures. With acetonitrile‐salt mixtures, the limit of detection (LOD) was in the 10^?7 M range. Linearity of more than two orders of magnitude was generally obtained. Precisions of migration times and peak areas were less than 0.9% and 7.5%, respectively. The applicabilities of the method for the analysis of ground water and lake water were examined.     

PEMFC催化剂的研究：自制抗CO中毒Pt-Ru/C电催化剂的性质

用胶体法制备了抗CO中毒PEMFC阳极Pt-Ru/C电催化剂（标记为THYT－2）,对 比研究了THYT－2与Johnson Matthey (JM)公司同类品牌Pt-Ru/C催化剂的电化学及 其它物理化学性能。结果表明,THYT－2电催化剂在甲醇燃料电池和CO／H_2（Φ_ (CO) = 1 * 10~(-4)）的氢氧燃料电池中的电催化行为与JM催化剂相当,但THYT－ 2在低浓度CO氢气燃料中的电池性能更好。两种催化剂的其它物理化学性质具有类 似性：XPS分析结果表明THYT－2和JM催化剂 中都有三种不同价态的Pt存在：即金 属态Pt(0)、氧化态Pt(II)和Pt(IV)。HRTEM测试结果表明两种催化剂的粒径处在2 ～3 mn左右,这可能是它们拥有良好电化学性能的主要原因之一。本文还对催化剂 中Pt与Ru组分的分布和相互作用进行了讨论,提出了改进Pt-Ru/C电催化剂的思路 。     

Electron Paramagnetic Resonance Study of Radical Pairs and Isolated Radicals Trapped in Irradiated Long-Chain Hydrocarbons at Low Temperatures

The intrinsic characteristics of radical pairs produced in squalane and in cetane receiving high gamma-dose are extensively studied with the EPR technique at temperatures from 77°K up to 150°K. The spectra of the paired radicals occur at g=4 with a very low transition probability in contrast to that of isolated radicals which appear at g=2 A well-resolved hyperfine spectrum corresponding to the species (CH₃CH₂.CH₂CH₃) is observed in cetane. The isothermal decay rates of radical pairs in cetane below 100°K are significantly slow; however, the decay kinetics at 150°K is first order with rate constant=1.86 min^?1. A relatively slower decay rate is obtained for isolated radicals suggesting that the decay mechanism of paired radicals is through geminate recombination. The relative inter-radical distance in radical pairs is known from a decay curve as a function of temperature. The yields of radical pairs are low in both matrices, only few percents of those of isolated radicals. The formation mechanisms of paired radicals with direct radiolytic bond scission process are discussed in connection with the experimental observations.     

H2S-induced reorganization of mixed monolayer of carboxylic derivatives on silver surface

The structure of self-assembled monolayers ofp-terphenyl-4-carboxylic acid and the mixed monolayers of this acid with n-hexadecanoic acid on silver surface were studied by reflection-IR spectroscopy, near-edge X-ray absorption fine structure (NEXAFS) measurement, X-ray photoemission electron microscopy (X-PEEM), and atomic force microscopy. Exposure of the p-terphenyl-4-carboxylate monolayer to H2S vapor resulted in reorganization of the film structure into clusters of the corresponding free acids, in tens of nanometer dimension. Exposure of the mixed monolayer to H2S resulted in reorganization of the mixed monolayer film into phase-separated clusters of respective component molecules. The saturated aliphatic acid formed clusters of submicrometer size, whereas the p-terphenyl-4-carboxylic acid formed clusters of tens of nanometer size, presumably due to different surface mobility and/or intermolecular interaction of the two types of molecule. Restoration of the monolayer film from the clusters, driven by the reaction between the free acid molecules and the basic surface sites, proceeded at different speeds for the two types of molecules. The saturated acid monolayer was restored much faster than the p-terphenyl-4-carboxylic acid monolayer. A domain-separated monolayer in several micrometers scale was obtained. The process was imaged by tapping mode atomic force microscopy.     

Monitoring the removal of carbonate from alkali metal hydroxide solutions using gas diffusion flow injection

Monitoring the removal of carbonate from alkali metal hydroxide (MOH, M = K, Na) solutions with calcium oxide (CaO) was studied using a newly developed method for the determination of trace amounts of total carbonate (TC) in alkaline solutions based on a flow injection (FI) technique coupled with a gas diffusion system. The optimized conditions of the FI system were as follows: the flow rate of each carrier, reaction solution (H2SO4) and receptor solution (Cresol Red, pH 8.9) was 0.25 ml min(-1), the sample size was 0.1 ml and the concentration of H2SO4 in the reaction solution was 0.09 M. The limit of detection of TC by the proposed method was 4 x 10(-7) M. The removal efficiency of carbonate was affected by the amount of CaO added, the shaking time of the solutions and the concentration of MOH. For 1 M NaOH and KOH solution, the removal efficiency of carbonate was about 99% and the concentration of residual carbonate was 4 x 10(-5) and 1.2 X 10(-4) M, respectively, when the amount of CaO added was 2 g l(-1) and the shaking time was 16 h.     

Effect of pendent group structures on the chemical selectivity and performance of sulfonated copolymers as novel pseudophases in electrokinetic chromatography

Amphiphilic copolymers of 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) with dihydrocholesteryl acrylate (pDHCHAt) or tert-octyl acrylamide (ptOAm) as comonomers were synthesized, characterized and used as new polymeric pseudostationary phases in electrokinetic chromatography. High-efficiency separations with theoretical plates around 500,000 to 870,000/m were achieved. Linear solvation energy relationships analysis of 20 solutes was performed to investigate the retention mechanism. Polycyclic aromatic hydrocarbons (PAHs) were separated under 30% v/v acetonitrile. The separation of nine aromatic model solutes by pDHCHAt showed significantly different selectivity from that of sodium dodecyl sulfate. Although only minor difference in selectivity was found for small aromatic compounds on pDHCHAt and poly(AMPS-lauryl acrylate), significantly different retention mechanism was found for PAHs and n-dodecanophenone comparing both copolymers. Significant chemical selectivity difference was found for selected small aromatic compounds on ptOAm and poly(AMPS-stearyl acrylamide).     

Tracking the optical mass centroid of single electroactive nanoparticles reveals the electrochemically inactive zone

The inevitable microstructural defects, including cracks, grain boundaries and cavities, make a portion of the material inaccessible to electrons and ions, becoming the incentives for electrochemically inactive zones in single entity. Herein, we introduced dark field microscopy to study the variation of scattering spectrum and optical mass centroid (OMC) of single Prussian blue nanoparticles during electrochemical reaction. The “dark zone” embedded in a single electroactive nanoparticle resulted in the incomplete reaction, and consequently led to the misalignment of OMC for different electrochemical intermediate states. We further revealed the dark zones such as lattice defects in the same entity, which were externally manifested as the fixed pathway for OMC for the migration of potassium ions. This method opens up enormous potentiality to optically access the heterogeneous intraparticle dark zones, with implications for evaluating the crystallinity and electrochemical recyclability of single electroactive nano-objects.

The schematic of single cubic-shaped Prussian blue (PB) mesocrystals formed by the oriented aggregation of small nanocrystals. The dark-field images of single PB nanoparticle at PB and Prussian white (PW) states, respectively.     

Design of a calcium-binding protein with desired structure in a cell adhesion molecule

Ca2+, "a signal of life and death", controls numerous cellular processes through interactions with proteins. An effective approach to understanding the role of Ca2+ is the design of a Ca2+-binding protein with predicted structural and functional properties. To design de novo Ca2+-binding sites in proteins is challenging due to the high coordination numbers and the incorporation of charged ligand residues, in addition to Ca2+-induced conformational change. Here, we demonstrate the successful design of a Ca2+-binding site in the non-Ca2+-binding cell adhesion protein CD2. This designed protein, Ca.CD2, exhibits selectivity for Ca2+ versus other di- and monovalent cations. In addition, La3+ (Kd 5.0 microM) and Tb3+ (Kd 6.6 microM) bind to the designed protein somewhat more tightly than does Ca2+ (Kd 1.4 mM). More interestingly, Ca.CD2 retains the native ability to associate with the natural target molecule. The solution structure reveals that Ca.CD2 binds Ca2+ at the intended site with the designed arrangement, which validates our general strategy for designing de novo Ca2+-binding proteins. The structural information also provides a close view of structural determinants that are necessary for a functional protein to accommodate the metal-binding site. This first success in designing Ca2+-binding proteins with desired structural and functional properties opens a new avenue in unveiling key determinants to Ca2+ binding, the mechanism of Ca2+ signaling, and Ca2+-dependent cell adhesion, while avoiding the complexities of the global conformational changes and cooperativity in natural Ca2+-binding proteins. It also represents a major achievement toward designing functional proteins controlled by Ca2+ binding.     

Mössbauer and electric conductivity studies of bidentate base adducts of acetylacetonatoiron(II)

Summary Bidentate bridging base polymer complexes of acetylacetonatoiron(II) [Fe(acac)₂L]_n, where L=pyrazine(pyz), 4,4-bipyridine(bpy),trans-1,2-bis(4-pyridyl)ethylene(bpe), 1,2-bis(4-pyridyl)ethane(bpa) and 4,4-trimethylene bipyridine(tmbpy), have been prepared, characterized and oxidized by iodine to give a range of iron(III) and iron(II) complexes [Fe(acac)₂L · I_x]_n] in which the Fe^III/Fe^II ratios were established by Mössbauer spectroscopy. The electric conductivities of compressed pellets of the polysalts were obtained. The conductivities and Mössbauer parameters (I.S. and Q.S.) both change with respect to the kind of bidentate bridging bases.The conjugation of bridged ligand markedly affects the conductivity of the complexes.     

添加剂对SiO电性能的影响及其机理分析

SiO_x/CoO and SiO/Li₂CO₃ composite materials were prepared by mechanical ball-milling. The structures of the obtained materials were characterized by X-ray diffraction (XRD). And scanning electron microscopes (SEM) of three samples after 20 cycles were also given. In addition， the electrochemical performances of three materials with galvanostatic charge-discharge cycling were investigated. The results show that the composite samples have larger initial reversible capacities and better cycle performance than pure SiO. Also，a schematic diagram showing the buffer effects of Li₂CO₃ addition and the mechanism of improving electrochemical performance by adding Li₂CO₃ are suggested.