Regulating the Water Molecular in the Solvation Structure for Stable Zinc Metal Batteries

Rechargeable aqueous zinc batteries are promising energy storage devices because of their low cost, high safety, and high energy density. However, their performance is plagued by the unsatisfied cyclability due to the dendrite growth and hydrogen evolution reaction (HER) at the Zn anode. Herein, it is demonstrated that the concentrated hybrid aqueous/non-aqueous ZnCl₂ electrolytes constitute a peculiar chemical environment for not only the Zn-ions but also water molecules. The high concentration of chloride ions substitutes the H₂O molecular in the solvation structure of Zn²⁺, while the acetonitrile further interacts with H₂O to decrease its activity. The hybrid electrolytes both inhibit the dendrite formation and HER, enabling an ultrahigh average Coulombic efficiency of 99.9% in the Zn||Cu half-cell and a highly reversible Zn plating/stripping with a low overpotential of 21 mV. Using this hybrid electrolyte, the Zn||polytriphenylamine (PTPAn) full cell deliveres a high discharge capacity of 110 mAh g⁻¹, a high power density of 9200 W kg⁻¹ at 100 °C and maintains 85% of the capacity for over 6000 cycles at 10 °C. This study provides a deep understanding between the solvation structure and columbic efficiency of Zn anode, thus inspiring the development for stable Zn batteries.     

High-Performing Quasi-2D Perovskite Photodetectors with Efficient Charge Transport Network Built from Vertically Orientated and Evenly Distributed 3D-Like Phases

Quasi-two-dimensional (Q-2D) perovskites are emerging as one of the most promising materials for photodetectors. However, a significant challenge to Q-2D perovskites for photodetection is their insufficient charge transport ability, which is mainly attributed to their hybrid low-dimensional n-phase structure. This study demonstrates that evenly-distributed 3D-like phases with vertical orientation throughout the film can greatly facilitate charge transport and suppress charge recombination, outperforming the prevalent phase structure with a vertical dimension gradient. Based on such a phase structure, a Q-2D Ruddlesden−Popper perovskite self-powered photodetector achieving a combination of exceptional figures-of-merit is realized, including a responsivity of 0.45 AW⁻¹, a peak specific detectivity of 2.3 × 10¹³ Jones, a 156 dB linear dynamic range, and a rise/fall time of 2.89 µs/1.93 µs. The desired phase structure is obtained by utilizing a double-hole transport layer (HTL), combining hydrophobic PTAA and hydrophilic PEDOT: PSS. Besides, the dependence of the hybrid low-dimensional phase structure is also identified on the surface energy of the buried HTL substrate. This study gives insight into the correlation between Q-2D perovskites’ phase structure and performance, providing a valuable design guide for Q-2D perovskite-based photodetectors.     

Interfacial Connections between Organic Perovskite/n+ Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

The rapidly increasing solar conversion efficiency (PCE) of hybrid organic–inorganic perovskite (HOIP) thin-film semiconductors has triggered interest in their use for direct solar-driven water splitting to produce hydrogen. However, application of these low-cost, electronic-structure-tunable HOIP tandem photoabsorbers has been hindered by the instability of the photovoltaic-catalyst-electrolyte (PV+E) interfaces. Here, photolytic water splitting is demonstrated using an integrated configuration consisting of an HOIP/n⁺silicon single junction photoabsorber and a platinum (Pt) thin film catalyst. An extended electrochemical (EC) lifetime in alkaline media is achieved using titanium nitride on both sides of the Si support to eliminate formation of insulating silicon oxide, and as an effective diffusion barrier to allow high-temperature annealing of the catalyst/TiO₂-protected-n⁺silicon interface necessary to retard electrolytic corrosion. Halide composition is examined in the (FA_1-xCs_x)PbI₃ system with a bandgap suitable for tandem operation. A fill factor of 72.5% is achieved using a Spiro-OMeTAD-hole-transport-layer (HTL)-based HOIP/n⁺Si solar cell, and a high photocurrent density of −15.9 mA cm⁻² (at 0 V vs reversible hydrogen electrode) is attained for the HOIP/n⁺Si/Pt photocathode in 1 m NaOH under simulated 1-sun illumination. While this thin-film design creates stable interfaces, the intrinsic photo- and electro-degradation of the HOIP photoabsorber remains the main obstacle for future HOIP/Si tandem PEC devices.     

A 2.20 eV Bandgap Polymer Donor for Efficient Colorful Semitransparent Organic Solar Cells

Semitransparent organic solar cells (ST-OSCs) have attracted increasing attention due to their promising prospect in building-integrated photovoltaics. Generally, efficient ST-OSCs with good average visible transmittance (AVT) can be realized by developing active layer materials with light absorption far from the visible light range. Herein, the development of ultrawide bandgap polymer donors with near-ultraviolet absorption, paired with near-infrared acceptors, is proposed to achieve high-performance ST-OSCs. The key points for the design of ultrawide bandgap polymers include constructing donor–donor type conjugated skeleton, suppressing the quinoidal resonance effect, and minimizing the twist of conjugated skeleton via noncovalent conformational locks. As a proof of concept, a polymer named PBOF with an optical bandgap of 2.20 eV is synthesized, which exhibited largely reduced overlap with the human eye photopic response spectrum and afforded a power conversion efficiency (PCE) of 16.40% in opaque device. As a result, ST-OSCs with a PCE over 10% and an AVT over 30% are achieved without optical modulation. Moreover, colorful ST-OSCs with visual aesthetics can be achieved by tuning the donor/acceptor weight ratio in active layer benefiting from the ultrawide bandgap nature of PBOF. This study demonstrates the great potential of ultrawide bandgap polymers for efficient colorful ST-OSCs.     

Dispersion-Enabled Symmetry Switching of Photonic Angular-Momentum Coupling

Photonic spin-orbit interactions describe the interactions between spin angular momentum and orbital angular momentum of photons, which play essential roles in subwavelength optics. However, the influence of frequency dispersion on photonic angular-momentum coupling is rarely studied. Here, by elaborately designing the contribution of the geometric phase and waveguide propagation phase, the dispersion-enabled symmetry switching of photonic angular-momentum coupling is experimentally demonstrated. This notion may induce many exotic phenomena and be found in enormous applications, such as the spin-Hall effect, optical calculation, and wavelength division multiplexing systems. As a proof-of-concept demonstration, two metadevices, a multi-channel vectorial vortex beam generator and a phase-only hologram, are applied to experimentally display optical double convolution, which may offer additional degrees of freedom to accelerate computing and a miniaturization configuration for optical convolution without collimation operation. These results may provide a new opportunity for complex vector optical field manipulation and calculation, optical information coding, light-matter interaction manipulation, and optical communication.     

Tetrabutylammonium Bromide Functionalized Ti3C2Tx MXene as Versatile Cathode Buffer Layer for Efficient and Stable Inverted Perovskite Solar Cells

2D Ti₃C₂T_x MXene, possessing facile preparation, high electrical conductivity, flexibility, and solution processability, shows good application potential for enhancing device performance of perovskite solar cells (PVSCs). In this study, tetrabutylammonium bromide functionalized Ti₃C₂T_x (TBAB-Ti₃C₂T_x) is developed as cathode buffer layer (CBL) to regulate the PCBM/Ag cathode interfacial property for the first time. By virtue of the charge transfer from TBAB to Ti₃C₂T_x demonstrated by electron paramagnetic resonance and density functional theory, the TBAB-Ti₃C₂T_x CBL with high electrical conductivity exhibits significantly reduced work function of 3.9 eV, which enables optimization of energy level alignment and enhancement of charge extraction. Moreover, the TBAB-Ti₃C₂T_x CBL can effectively inhibit the migration of iodine ions from perovskite layer to Ag cathode, which synergistically suppresses defect states and reduce charge recombination. Consequently, utilizing MAPbI₃ perovskite without post-treatment, the TBAB-Ti₃C₂T_x based device exhibits a dramatically improved power conversion efficiency of 21.65% with significantly improved operational stability, which is one of the best efficiencies reported for the devices based on MAPbI₃/PCBM with different CBLs. These results indicate that TBAB-Ti₃C₂T_x shall be a promising CBL for high-performance inverted PVSCs and inspire the further applications of quaternary ammonium functionalized MXenes in PVSCs.     

A Hybrid Strategy-Based Ultra-Narrow Stretchable Microelectrodes with Cell-Level Resolution

Stretchable ultra-narrow (e.g., 10 µm in width) microelectrodes are crucial for the electrophysiological monitoring of single cells providing the fundamental understanding to the working mechanism of neuro network or other electrically functional cells. Current fabrication strategies either focus on the preparation of normal stretchable electrodes with hundreds of micrometers or millimeters in width by using inorganic conductive materials or develop conductive organic polymer gel for ultra-narrow electrodes which suffer from low stretchability and instability for long-term implantation, therefore, it is still highly desirable to explore bio-interfacial ultra-narrow stretchable inorganic electrodes. Herein, a hybrid strategy is reported to prepare ultra-narrow multi-channel stretchable microelectrodes without using photolithography or laser-assisting etching. A 10 µm × 10 µm monitoring window is fabricated with enhanced interfacial impedance by the special rough surface. The stretchability achieves to 120% for this 10 µm-width stretchable electrode. Supported by these superior properties, it is demonstrated that the stretchable microelectrodes can detect electrophysiological signals of single cells in vitro and collect electrophysiological signals more precisely in vivo. The reported strategy will open up the accessible preparation of the fine-size stretchable microelectrode. It will significantly improve the resolution of monitoring and stimulation of inorganic stretchable electrodes.     

航空机载软件全数字仿真测试系统的设计与实现

针对航空机载软件测试环境与开发环境冲突、测试环境可控性和通用性差、非干预性测试困难的问题,分析了全物理实装测试环境、半实物仿真测试环境的优缺点,研究了全数字仿真测试技术,设计并实现了一种航空机载软件全数字仿真测试系统。该系统由仿真核心平台、仿真工具组件、协同仿真组件和人机交互组件构成,提供了航空机载处理器、内存、外设等多种可重用库。提出了基于底层虚拟机的动态二进制翻译技术、协同仿真时间同步和数据通信机制等关键技术,实现了航空机载软件全数字高速闭环仿真运行。工程实践证明,该系统能达到降低硬件设备的依耐性、简化测试环境搭建的复杂度、提高测试效率约42%的目的。