信息高速公路上的安全问题

首先介绍了信息高速公路的概貌,并指出了信息高速公路将面临的威胁和攻击,接着说明了信息高速公路应当具备的基本安全特性以及实现这些特性可以采取的措施,最后介绍了信息高速公路安全技术的开发动态。     

Two-dimensional simulation of silicon avalanche cathodes

The characteristics of silicon avalanche cathode as a novel electron emitting device with ultra-shallow p-n junctions have been studied using the two-dimensional device simulator PISCES-IIB. The steady-state simulation indicates that the nonplanar surface topology resulting from fabrication process causes current crowding near the edge of the emitting area where the surface step exists. Current crowding degrades the emission uniformity and also reduces the emission current under increased reverse bias. The nonplanar surface structure also causes punchthrough in the epitaxial layer as the reverse bias on the cathode increases. As a result, the percentage of the cathode current contributing to emission decreases, reducing the emission efficiency consequently. The simulation shows that the portion of the cathode current that flows through the emitting area drops to as much as 30% at cathode bias higher than 12 V, compared to the same current just after breakdown. This also affects the rate of increase in the total emission current which is the product of the emission efficiency and the overall cathode current     

Process characterization and optimization based on censored datafrom highly fractionated experiments

Censored data resulting from life-test of durable products, coupled with complicated structures of screening experiments, makes process characterization very difficult. Existing methods can be inadequate for modeling such data because important effects and factor levels might be identified wrongly. This article presents an expectation-modeling-maximization (EMM) algorithm, where censored data are imputed as pseudo-complete samples and a forward regression is used to compare all main effects and 2-factor interactions for process characterization. Then, the best combination of controllable variables is determined in order to optimize predictions from the final model. A sensitivity study of the selected models, with changes of imputation and parameter estimation methods, shows the importance of using appropriate models and estimation methods in EMM. The author's analysis of the Specht (1985) heat-exchanger life-test data indicates that E, EG, EH in the wall data and A, K, D, DJ in the corner data are the dominating factors. However, in finding the best process recipe, one might use a model with a few additional terms, which leads to more accurate predictions for better process optimization     

相关噪声中随机信号的Robust检测

本文重点讨论了在平稳ｍ相依噪声中弱随机信号的最佳无记忆Ｒｏｂｕｓｔ检测问题；并且以渐近功效函数为测度准则得到了最大最小无记忆非线性Ｒｏｂｕｓｔ检测器。     

A framework for characterizing disaster-based network survivability

This paper formulates a general framework that includes and extends the existing definitions for network survivability. Based on this framework, network survivability is characterized by a survivability function rather than a single-value survivability measure, and various quantities of interest can be derived from the function. Examples are the expected survivability, the worst-case survivability, the r-percentile survivability, and the probability of zero survivability. The survivability function is especially useful for the study of large-scale disasters. For illustration, the authors derive the survivability function in closed form for a simple ring network under link failures. They also discuss the general procedure for finding survivability functions for complex networks, and show that the survivability function reveals useful information about a network. This framework provides a unified and practical approach to analyzing and designing highly survivable communications networks     

Patterned uniformly orientated silicon nanocrystallite films and efficient field emission characteristics

Patterned uniformly (100)-orientated silicon nanocrystallite (SiNC) films were fabricated based on hydrogen ion implantation technique and typical electrochemical anodic etching method. The surface morphology and microstructure characteristics of the films were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and atomic force microscopy. The efficient field emission with low turn-on field of about 3.2 V/μm at current density of 0.1 μA/cm² was obtained. The emission current density from the SiNC films reached 1 mA/cm² under a bias field of about 11 V/μm. The experimental results demonstrate that the SiNC films have great potential applications for flat panel displays.     

Synthesis and characterization of novel thermoresponsive‐co‐biodegradable hydrogels composed of N‐isopropylacrylamide,poly(L‐lactic acid), and dextran

A series of novel multifunctional hydrogels that combined the merits of both thermoresponsive and biodegradable polymeric materials were designed, synthesized, and characterized. The hydrogels were copolymeric networks composed of N‐isopropylacrylamide (NIPAAM) as a thermoresponsive component, poly(L‐lactic acid) (PLLA) as a hydrolytically degradable and hydrophobic component, and dextran as an enzymatically degradable and hydrophilic component. The chemical structures of the hydrogels were characterized by an attenuated total reflection–Fourier transform infrared spectroscopy (ATR–FTIR) technique. The hydrogels were thermoresponsive, showing a lower critical solution temperature (LCST) at approximately 32 °C, and their swelling properties strongly depended on temperature changes, the balance of the hydrophilic/hydrophobic components, and the degradation of the PLLA component. The degradation of the hydrogels caused by hydrolytic cleavage of ester bonds in the PLLA component was faster at 25 °C below the LCST than at 37 °C above the LCST, determined by the ATR–FTIR technique. Due to their multifunctional properties, the designed hydrogels show great potential for biomedical applications, including drug delivery and tissue engineering. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5054–5066, 2004     

电视节目制作中的压缩格式

电视节目制作系统中存在着几种格式的压缩问题 ,对几种压缩方式及其优缺点进行了分析。     

基于移动端多天线系统的无线衰落信道模型

根据当前无线移动通信对多天线移动接收端性能仿真的要求，讨论并建立了适于空时信号处理的移动端矢量信道模型。通过分析无线移动信道特点。研究了影响接收信号幅度相位的诸多因素，建立了相应的数学模型。并对随机参数选取进行了探讨。其中考虑到移动端接收信号到达角扩散的特点，采用GBSB椭圆模型产生了适于移动端接收信号仿真的随机角度，改进了一种瑞利衰落生成算法。最后信道的数值仿真结果符合理论和经验。同时，通过TD-SCDMA系统链路级仿真，也证明了该信道模型的有效性。