Development of BCPDA-Eu3+-BAS Labeled Hepatitis B Surface Antibodies

The effect of the chelating agent 4,7-bis(chlorosulfophenyl)-1,10-phenanthroline-2,9-dicarboxylic acid (BCPDA) labeled hepatitis B surface antibodies(HBsAb) on time-resolved fluoroimmunoassays(TRFIA) was investigated. The labeling detection method was established. The biotin-streptavidin(BAS) system was introduced, and the multi-stage amplification effect of the BAS system was analyzed. It is found that the BCPDA-Eu³⁺-HBsAb-BAS fluorescent marker can emit strong fluorescence. Compared to BCPDA-Eu³⁺-HBsAb, BCPDA-Eu³⁺-HBsAb-BAS demonstrates an enhanced fluorescence intensity by over 10 times. This study provides a guidance for the next gene- ration non-radio immunoassays in clinical diagnosis.     

Analysis of Protein Moiety of Polysaccharide Conjugates Water-extracted from Low Grade Green Tea

Tea polysaccharide conjugates(TPCs) were water-extracted and purified from low-grade green tea. Although TPC contains 1.97% covalent binding proteins, Coomassie brilliant blue G250 and R250 could not detect this protein. The "should-shape" absorption peak observed at 250-280 nm in the UV-Vis spectrum was caused by quinone compounds derived from polyphenol oxidation during TPC extraction. The UV-Vis spectrum could be used to detect the decolorizing degree of TPC. TPC aqueous solution merely presented the negative charge properties of its polysaccharides instead of the acid-base property of its protein section, and exhibited higher stability at pH greater than 5.0. No precipitation or haze occurred in three TPC/epigallocatechin gallate(EGCG) aqueous mixtures during 12 h storage. TPC had emulsifying activity, which indicated that its protein moiety formed hydrophobic groups. It is proposed that some of the physicochemical properties of the TPC protein moiety are shielded by its polysaccharide chain.     

Four Coordination Polymers Assembled with a New Biscarboxyl-functionalized Schiff Base Ligand

Based on a new biscarboxyl-functionalized Schiff base ligand 1,2-cyclohexanediamino-N,N'-bis[3-methoxyl-5-(p-carboxyl-phenylazo)] salicylidene(H₄L), four polymers,[(CH₃)₂NH₂]₂·[Mn₃(L)₂(H₂O)₄]·2DMF(CP1),[Fe₂(L)(H₂O)(DMF)](CP2),[(CH₃)₂NH₂]·[Cu(HL)]·H₂O(CP3) and[Ni₂(L)(teta)]·2DMF·H₂O(CP4), have been synthesized(teta=5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane). In CP1, both of the internal[N₂O₂] pocket and the external carboxylate groups of L^4- anion are ligated by Mn²⁺ ions, and the structure displays a layer. In CP2, the Fe²⁺ cations are linked by L^4- anions to form a binuclear double chain. CP3 displays a[Cu₂(HL)₂] dimer. In CP4, the Ni²⁺ ions are connected by L^4- anions to form a chain. The structures are further linked by hydrogen bonds to form 2D or 3D supramolecular architectures, respectively. CP1 exhibits adsorption ability to three organic dyes.     

XPS与UPS测量几种材料功函数的比较

为比较X射线光电子能谱(XPS)与紫外光电子能谱(UPS)测量材料功函数结果间的差异,依次对经氩离子清洁表面吸附层的Au、Ag薄膜样品和单晶硅片,以及未进行表面清洁的Au、Ag、MoO_3薄膜样品,单晶硅片及ITO导电玻璃的功函数进行测量。给出了XPS和UPS测量功函数的计算方法,并探讨了影响材料功函数测量结果不确定性的因素。研究发现XPS及UPS在测量表面清洁的金属样品时,测量结果基本一致,具有较高的准确度,表面清洁的Au、Ag样品一经暴露空气后其表面覆盖一层吸附层,功函数很快发生变化。利用UPS或XPS测量金属和半导体的功函数时应避免暴露空气,若金属样品在空气中暴露时建议使用氩离子清洁表面。研究结果对科研人员按实际测试需求合理选择测量方法具有一定的指导意义。     

多功能纳米材料在肿瘤放疗增敏中的应用

放射治疗是利用放射线治疗肿瘤的一种局部治疗方法,目前已成为临床上最常用、最有效的恶性肿瘤治疗手段之一。但放射治疗仍存在辐射剂量高、对健康组织副作用大,特别是肿瘤细胞放射抵抗性强等缺点。随着纳米医学的发展,多功能纳米放疗增敏剂为增强肿瘤细胞放射敏感性、提高放疗效果提供了新机遇。本文结合纳米材料在放疗增敏中的优势和潜能,概括了纳米放疗增敏剂的主要类型和目前已进入临床实验的一些实例,简述了多功能纳米放疗增敏剂在肿瘤放射治疗中的应用,并归纳了纳米材料增敏放疗的主要途径和影响因素。最后总结和展望了多功能纳米放疗增敏剂面临的挑战和发展前景。     

还原氧化石墨烯/介孔TiO2复合材料的合成及其光解水制氢性能

采用溶胶凝胶法,以钛酸四异丙酯(TTIP)为钛源,十六烷基三甲基溴化铵(CTAB)为模板剂合成了介孔二氧化钛样品mTiO_2,考察了合成温度、水量、模板剂用量和焙烧温度对其在紫外光条件下光催化产氢活性的影响。结果显示,在350℃下焙烧后,样品由无定形结构转变为锐钛矿相;随着焙烧温度的提高,锐钛矿相结构产物的结晶度提高,当焙烧温度超过550℃后,样品大部分转变为金红石相。以合成温度为30℃,模板剂用量(nCTAB/nTiO_2)为0.2,水量(nH2O/nTiO_2)为100,焙烧温度为450℃条件下合成的m-TiO_2样品为催化剂,当催化剂用量为0.4 g·L-1,体系中甲醇浓度高于20%(V/V)时,其紫外光条件下的光催化产氢活性达170 mmol·g-1·h-1。采用水热法将氧化石墨烯(GO)与m-TiO_2复合制备了一系列还原氧化石墨烯/介孔TiO_2复合材料(rGO/m-TiO_2),其晶相结构为锐钛矿相。当r GO复合量(wGO/wTiO_2)为0.01时,样品在紫外光下的产氢活性为241 mmol·g-1·h-1,能量转化效率达7.4%,较未复合样品提高了42.3%;在可见光条件下,其产氢活性达9 mmol·g-1·h-1。     

纳米锰基普鲁士白的制备及电化学储钠性能

采用高温共沉淀法制备锰基菱方相的普鲁士白正极材料,研究合成温度对产物微结构和电化学性能的影响。研究发现,随着合成温度的提高,产物的结晶度、颗粒尺寸和嵌钠容量明显提高。当合成温度为90℃时,产物在15 mA·g^-1下首次充放电容量分别达到142和139 mAh·g^-1。在30和50 mA·g^-1分别循环300和600次时,容量仍保持在111和89 mAh·g^-1。     

有机锡5-甲基/氨基-1H-四唑乙酸酯的合成、结构与抗肿瘤活性

通过5-甲基/氨基-1H-四唑乙酸与（R₃Sn）₂O（R为苯基或正丁基）及三环己基氢氧化锡的反应,合成了5个三有机锡5-甲基/氨基-1H-四唑乙酸酯。通过核磁,红外及X射线单晶衍射分析,对这些化合物进行了详细的结构表征。结果表明,这些化合物往往通过分子间的Sn…N作用形成配位高分子。初步的生物活性测试表明,这些配合物对Hela和A549细胞具有明显的体外细胞毒性。     

超高效合相色谱法分离布洛芬手性对映体的实验教学

以布洛芬药片为样品,采用超高效合相色谱法（Ultra Performance Convergence Chromatography,UPC2）分离布洛芬的一对对映异构体。通过考察流动相组成、柱温及系统反压对对映体分离的影响,确定最佳色谱分离条件。将超高效合相色谱法首次应用于检验系本科生仪器分析实验教学,不仅使学生学到了一种新的色谱分析技术,也拓展了学生对先进仪器、先进技术和知识的了解,使实验教学真正成为学生学习知识、培养创新能力的有效途径。     

“实验化学”翻转课堂教学案例设计

针对实验化学课程的特点,探讨了实验化学“课前知识传递,课堂知识内化,课后反思提高”的翻转课堂教学设计。以“硫酸亚铁铵的制备”为实验案例,通过翻转课堂在学习目标、活动主体与教学流程上的教学设计,详细阐述了以学生为中心的教学实施,并全面评价了教学实践。