一锅法合成Ce_xZr_(1-x)O_2固溶体催化剂用于热化学循环分解CO_2制CO

采用一锅蒸发诱导自组装法(EISA)制备了一系列不同铈锆物质的量比的铈锆固溶体催化剂,用TGA研究了其热化学循环分解CO_2制CO的催化性能,并采用XRD、Raman光谱、H2-TPR、XPS、SEM和N_2吸附-脱附等手段对催化剂的物相结构、还原性能和表面化学性质进行了表征分析,用热重分析(TGA)研究了铈锆固溶体对热化学循环分解CO_2制CO的催化性能。结果表明,随着Ce/Zr物质的量比增加,铈锆固溶体催化剂的CO_2高温分解活性先增大后减小。Ce/Zr物质的量比为1的Ce_(0.5)Zr_(0.5)O_2催化剂由于具有较多的晶格缺陷和氧空穴,氧迁移能力强,催化活性高,而Ce/Zr物质的量比为3的Ce_(0.75)Zr_(0.25)O_2催化剂具有相对稳定的氧空穴数,循环稳定性好。循环反应后,所有的催化剂均出现了一定程度的烧结,且富锆固溶体发生了相分离,这可能会影响催化剂的性能。     

应用化学"113"人才培养体系的探索

In order to bridge the gap between the supply and the demand of talent cultivation, the existing talent cultivation system of applied chemistry specialty is reformed and a new "113" talent cultivation system is guided by Outcome-Based Education (OBE) education. The advanced engineering education mode is adopted to provide students with an engineering education based on the background environment of the conceptual-design-implementation-operation (CDIO) process. The characteristic "three modernizations" education mechanism, namely, cooperative education, family training and personalized guidance, are implemented. By building a new system of "113" talents training, an engineering talent training environment is formed, which takes the family as a unit, the enterprise as the background, and the project as the carrier. The problem of separating the supply from the demand of talents training for applied chemistry specialty will be fundamentally solved.     

多孔硅/TiO2纳米线光阳极的制备及其光电催化性能

使用金属辅助化学刻蚀(MACE)法与水热法,改变贵金属粒子的刻蚀时间,制备不同n型多孔硅/TiO_2纳米线光阳极。通过扫描电镜(SEM)和X射线衍射仪(XRD)对光阳极样品进行表征,结果显示多孔硅宏孔的尺寸会随着刻蚀时间延长而增大,由0.1μm变化到0.4μm,多孔硅表面长有TiO_2纳米线为金红石相及少量锐钛矿相。测试结果显示刻蚀35 min的多孔硅/TiO_2样品具有最高的减反射率,在模拟太阳光下具有较高的光电流(光电流密度)活性,且在1.5 V外加偏压下具有最高的光电催化活性。这是由于刻蚀35 min的多孔硅基底具有优异的减反射性能,同时多孔硅与Ti O_2纳米线复合形成光阳极之后具有异质结效应和窗口效应,使得多孔硅/TiO_2纳米线光阳极具有优异光电化学性能。     

微型通风橱

简单介绍设计的微型通风橱在处理有毒气体上的应用,使有毒气体参与或产生的反应更环保。     

分子印迹手性整体柱的制备及对非对映异构体的分离

 采用原位分子印迹技术 ,单步制备了一种辛可宁印迹的手性整体柱。为了提高柱效和选择性 ,选择了相对低极性的甲苯 /十二醇复合致孔体系。在等度及梯度洗脱条件下 ,非对映异构体辛可宁与辛可尼丁被完全分离。等度洗脱中相对较宽的峰可以在梯度洗脱中得到改善。同时考察了流动相中醋酸浓度、流速以及温度对分离的影响。由于柱中存在大的流通孔 ,大大降低了分离过程中的柱压降 ,从而使这种柱能够在相对高的流速下使用。提高温度可以提高分离因子 ,在 60℃获得最大分离因子 5 40。     

Kinetic model of induced codeposition of Ni-Mo alloys

The kinetic model of induced codeposition of nickel-molybdenum alloys from ammoniun citrate solution was studied on rotating disk electrodes to predict the behavior of the electrode-position. The molybdate (MoO42-) could be firstly electro-chemically reduced to MoO2, and subsequently undergoes a chemical reduction with atomic hydrogen previously adsorbed on the inducing metal nickel to form molybdenum in alloys. The kinetic equations were derived, and the kinetic parameters were obtained from a comparison of experimental results and the kinetic equations. The electrochemical rate constants for discharge of nickel, molybdenum and water could been expressed as k1(E) = 1. 23 × 109 CNi exp( - 0.198FE/RT) mol/(dm2·s), k2(E) =3.28× 10-10 CMoexp( - 0. 208FE/ RT) mol/(dm2·s) and k3(E) = 1.27 × 10-6exp( - 0.062FE/ RT) mol/(dm2 · s), where CNi and CMo are the concentrations of the nickel ion and molybdate, respectively, and E is the applied potential vs. saturated calomel electrode (SCE). The codeposition p     

酞菁锌衍生物L-B膜的光电性能研究

用L-B膜方法在SnO₂电极上修饰了不同链长烷氧基取代的酞菁锌化合物(ZnPc C_nH_2n+1,n=3,9,12,16),分别研究了它们单分子膜成膜性能和转移性能,并测定了修饰在SnO₂电极上的单多层分子膜的光电性能和吸收光谱。研究结果指出链短的取代基即异丙氧基取代的酞菁锌(ZnPcC₃H₇(i))具有较高的转移比及较好的光电性能。     

雪松烯的光氧化反应研究

以次甲基兰为光敏剂, 甲醇为溶剂, 用通氧光照产生的单重态氧与雪松烯反应,产物只有一种。用元素分析、红外光谱。核磁共振谱、质谱以及高压液相色谱等方法测定了产物的分子结构。并讨论了光氧化反应的动力学控制和立体效应。     

~(13)C-NMR研究高效载体催化剂丙烯立体定向聚合反应机理

<正> 自从用C-NMR技术对聚丙烯进行测定,得到了分辨力良好的聚丙烯甲基碳区域的核磁共振谱后,引起了聚丙烯研究者的极大兴趣,迅速开展了应用核磁共振技术来研究聚丙烯分子链的构型和立体定向聚合机理,众所周知,用不同催化剂体系进行丙烯聚合,得到的聚合物链结构不同,聚合机理也有所差别。Zambelli等认为用Ziegler-Natta型催化剂体系聚合得到的聚丙烯,其聚合机理属于催化剂活性中心控制的单活性中心模型。Yoshio Inoue等用TiCl_4/MgCl_2/C_6H_5COOC_2H_5-AlEt_3 催化剂体系进行丙烯聚合,