聚苯硫醚／石墨基双极板复合材料性能的研究

以聚苯硫醚树脂和人造石墨为原料一次模压成型制备双极板复合材料.研究了模压成型过程中加压时机、冷却方式及人造石墨原料对复合材料电导率和弯曲强度的影响.结果表明,制备聚苯硫醚/石墨基双极板材料宜选用石墨化程度较高且结构密实的石墨粉料;采用保温后加压及空气中冷却方式制备的复合材料的综合性能较优.     

损伤断裂图型演化的统计描述

本文采用动力学演化与随机跃迁并存的模型,研究损伤断裂图型的演化规律。根据演化的终态,损伤演化可分为整体稳定(GS)和演化引起剧变(EIC)两种模式,后者联系于断裂现象。本文引入统计描述,并指出,即使微损伤的连接规律是确定性的,无序介质中断裂的出现亦应以概率分布函数描写。     

Study on the Photophysical Process in N-Phenyl Phenothiazine and N-(2-Pyridine) Phenothiazine

By the measurements of the solvent and temperature effects of the fluorescence emission spectra and lifetime of N-phenyl phenothiazine (PHZ) and N-(2-pyridine) phenothiazine (PYZ),the existence of strongly twisted intramolecular charge transfer (TICT) state in PYZ emission spectra is proved.The exciplex formed by PHZ, PYZ and dimethyl terephthalate (DMTP) is investigated, and moreover, the transient absorption spectra of positive and negative ions as the results of the dissociation of the exciplex in the polar solvents is observed through the flash photolysis.     

关于具有常平均曲率和数量曲率超曲面的Mbius几何的一个注记

设x:M→Sn 1(n≥3)是n 1-维单位球中的无脐点超曲面, Mobius不变量G,Φ,A和B分别表示x的Mobius度量, Mobius形式, Blaschke形式和Mobius第二基本形式．本文证明了如果x的Mobius形式Φ平行,并且A λG μB=0,其中λ,μ分别是定义在M上的光滑函数,那么Φ=0,由此及李海中、王长平(2003年)文献中的分类定理给出了Sn 1中具有平行的Mobius形式及满足A λG μB=0的超曲面的分类．此结果推广了他们及张廷枋(2003年)文献中的结果．     

Self-Assembly of Micro-Parts onto Si Substrates at Liquid-Liquid Interface

We report a new approach for the self-assembly of cuboid micro-parts onto Si substrates to construct three-dimensional microstructures. To perform assembly, the Si substrates are prepared with a deep cavity array as binding sites. An aggregate composed of hundreds of uniformly aligned micro-parts is formed at the C10F18-H2O interface. The micro-parts are arranged by passing the substrate through the aggregate of micro-parts, thus the micro-parts are left on the substrate, and then the substrate is vibrated ultrasonically in the solution, making it possible for the micro-parts to fall into the cavities on the substrate. Finally the substrate is pulled out of the solution after assembly. This technique could give a high yield of up to 70%, providing a new method for micro-assembly.     

SD对壳模型: 偶偶Pt核低激发态性质

利用SD对壳模型讨论了偶偶Pt核低激发态的集体性质. 结果发现在该模型下, 利用一个仅含有3个参数的哈密顿量, 可以很好地再现偶偶Pt核低激发谱的集体性质.     

TDI三聚体的合成研究

以一种碱金属羧酸盐K-1000作为甲苯二异氰酸酯(TDI)三聚反应的催化剂合成了以TDI三聚体为主要成分的多异氰酸酯固化剂。对合成工艺条件进行了探讨。结果表明,将反应温度控制在35℃,催化剂K-1000用量为0.06%时,用苯甲酰氯作为阻聚剂可得到性能基本稳定的TDI三聚体产品。     

糖蛋白/胆红素钙水溶性复合物的形成及光谱研究

采用傅立叶变换红外光谱(FT-IR)，结合减法、二阶导、退卷积和曲线拟合等先进光谱技术，紫外可见光谱，ICP-AES分析方法，对不同质量比的α-酸性糖蛋白(AGP)和胆红素钙(CaBR)反应后的滤液进行了研究。结果表明，AGP和CaBR之间存在着较强的相互作用，导致AGP二级结构的有序性增加，CaBR的水溶性增大，两者形成了可溶性的AGP/CaBR复合物。     

Preparation of Nanoelectrode Ensembles by Assembly of Nano—Silver Colloid on Gold Surface

A novel method for preparing silver nanoelectrode ensembles(SNEEs) and gold nanoelectrode ensembles (GNEEs) has been developed. Silver colloid particles were first absorbed to the gold electrode surface to form a monolayer silver colloid. N-hexadecyl nercaptan was then assembled on the electrode to form a thoil monolayer on which hydrophilic ions cannot be transfered. The SNEEs was prepared by removing thiol from silver colloid surface through applying and AC voltage with increasing frequency at 0.20V(vs.SCE). Finally,GNEEs was obtained by immersing a SNEEs into 6 mol/L HNO3 to remove the silver colloid particles. By comparison with other methods such as template method ect., this method enjoys some advantages of lower resistance, same diameter,easy preparation,controllable size and density.