Relaxor behavior of (Ba,Sr)(Zr,Ti)O3 ferroelectric ceramics

We examine the ferroelectric-relaxor behavior of (Ba_0.65Sr_0.35)(Zr_0.35Ti_0.65)O₃ (BSZT) ceramics in the temperature range from 80 to 380 K. A broad dielectric maximum, which shifts to higher temperature with increasing frequency, signifies the relaxor-type behavior of these ceramics. The value of the relaxation parameter γ∼2 estimated from the linear fit of the modified Curie-Weiss law, indicates the relaxor nature of the BSZT ceramics. The dielectric relaxation rate follows the Vogel-Fulcher relation with T_VF=107 K, E_a=0.121 eV, and ν₀=6.83×10¹⁴ Hz, further supports such relaxor nature. The slim P-E hysteresis loop and ‘butterfly’ shape dc bias field dependence of permittivity at T>T_m (T_m, the temperature of permittivity maximum) clearly signifies the occurrence of nanopolar clusters, which is the typical characteristic of ferroelectric relaxor. At 300 K and 10 kHz, the dielectric constant and loss tan δ are ∼1100 and 0.0015, respectively. The high tunability (∼25%) and figure of merit (∼130) at room temperature show that the BSZT ceramics could be a promising candidate for tunable capacitor applications.     

Microwave‐improved polymerization of ϵ‐caprolactone initiated by carboxylic acids

The ring‐opening polymerization of ε‐caprolactone (ε‐CL), initiated by carboxylic acids such as benzoic acid and chlorinated acetic acids under microwave irradiation, was investigated; with this method, no metal catalyst was necessary. The product was characterized as poly(ε‐caprolactone) (PCL) by ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, ultraviolet spectroscopy, and gel permeation chromatography. The polymerization was significantly improved under microwave irradiation. The weight‐average molecular weight (M_w) of PCL reached 44,800 g/mol, with a polydispersity index [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] of 1.6, when a mixture of ε‐CL and benzoic acid (25/1 molar ratio) was irradiated at 680 W for 240 min, whereas PCL with M_w = 12,100 and M_w/M_n = 4.2 was obtained from the same mixture by a conventional heating method at 210 °C for 240 min. A degradation of the resultant PCL was observed during microwave polymerization with chlorinated acetic acids as initiators, and this induced a decrease in M_w of PCL. However, the degradation was hindered by benzoic acid at low concentrations. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 13–21, 2003     

A Family of Far‐Infrared‐Transmitting Glasses in the Ga–Ge–Te System for Space Applications

Conditions of formation of bulk tellurium chalcogenide glasses, containing 70–80 at % Te associated to Ga and Ge are described. The characteristic temperatures are measured: the glass‐transition temperature, T_g, is situated in the range 140–185 °C and the difference T_x – T_g, where T_x is the onset crystallization temperature, is in the range 76–113 °C. Moreover, the optical transmission window is exceptional, ranging from 1.99 μm in the bandgap up to 28 μm in the phonon region. Developed within the framework of requirements for the Darwin mission (a search for and study of extrasolar planets), feasibility of infrared optical fibers formed from these glasses is studied. Drawing experiments are conducted with the glass Ga₂‐Ge₃Te₁₅, which possesses the maximum T_x – T_g, and a first optical fiber is presented.     

Diffusion of 99Tc in granite under aerobic and anoxic conditions

Summary  Vezetéknév     

Programmable group-delay module using binary polarization switching

We demonstrate the first programmable group-delay module based on polarization switching. With a unique binary tuning mechanism, the device can generate any differential group delay value from -45 to +45 ps with a resolution of 1.40 ps, or any true-time-delay value from 0 to 45 ps with a resolution of 0.7 ps. The delay varying speeds for both applications are under 1 ms and can be as fast as 0.1 ms. We evaluate both the dynamic and static performances of the device while paying special attention to its dynamic figures of merit for polarization-mode dispersion emulation and compensation applications. Our experiment shows that the device exhibits a negligible transient-effect induced power penalty (<0.2 dB) in a 10-Gb/s nonreturn-to-zero system.     

Positively Thermo‐Sensitive Monodisperse Core–Shell Microspheres

In this paper, we report on a novel family of monodisperse thermo‐sensitive core–shell hydrogel microspheres that is featured with high monodispersity and positively thermo‐responsive volume phase transition characteristics with tunable swelling kinetics, i.e., the particle swelling is induced by an increase rather than a decrease in temperature. The microspheres were fabricated in a three‐step process. In the first step, monodisperse poly(acrylamide‐co‐styrene) seeds were prepared by emulsifier‐free emulsion polymerization. In the second step, poly(acrylamide) or poly[acrylamide‐co‐(butyl methacrylate)] shells were fabricated on the microsphere seeds by free radical polymerization. In the third step, the core–shell microspheres with poly‐ (acrylamide)/poly(acrylic acid) based interpenetrating polymer network (IPN) shells were finished by a method of sequential IPN synthesis. The proposed monodisperse core–shell microspheres provide a new mode of the phase transition behavior for thermo‐sensitive “smart” or “intelligent” monodisperse micro‐actuators that is highly attractive for targeting drug delivery systems, chemical separations, sensors, and so on.     

Ionic conductivity of epitactic MBE-grown BaF2 films

We studied parallel conductivities of pure BaF₂ films with thicknesses ranging from 35 to 300 nm, epitaxially grown on Al₂O₃(0 1 2) substrates by molecular beam epitaxy technique. The overall conductivities of the films are found to increase with decreasing thickness. The detailed investigation of the overall conductance as a function of the thickness permits the deconvolution of bulk and boundary effects, the latter being attributed to distinct space charge effects in the interface between BaF₂ film and Al₂O₃ substrate. The (extrinsic) Debye length (λ) is estimated to be about 8 nm at T=593 K, which corresponds to an impurity content of 10¹⁸/cm³ (singly ionized dopant assumed). This is consistent with the fact that we observed a constant boundary contribution for all investigated films (film thickness >4λ). It is also consistent with the Debye length observed in a previous report on CaF₂/BaF₂ heterolayers fabricated by the same technique, in which the low temperature enhancement was also attributed to space charges in BaF₂ [Nature 408 (2000) 946]. Only at low temperatures (below 370 °C), the conductance seems to be influenced by strain effect.     

Thermal degradation of two liquid fuels and detonation tests for pulse detonation engine studies

The use of liquid fuels such as kerosene is of interest for the pulse detonation engine (PDE). Within this context, the aim of this work, which is a preliminary study, was to show the feasibility to initiate a detonation in air with liquid-fuel pyrolysis products, using energies and dimensions of test facility similars to those of PDEs. Therefore, two liquids fuels have been compared, JP10, which is a synthesis fuel generally used in the field of missile applications, and decane, which is one of the major components of standard kerosenes (F-34, Jet A1, ...). The thermal degradation of these fuels was studied with two pyrolysis processes, a batch reactor and a flow reactor. The temperatures varied from 600°C to 1,000°C and residence times for the batch reactor and the flow reactor were, respectively, between 10–30 s and 0.1–2 s. Subsequently, the detonability of synthetic gaseous mixtures, which was a schematisation of the decomposition state after the pyrolysis process, has been studied. The detonability study, regarding nitrogen dilution and equivalence ratio, was investigated in a 50 mm-diameter, 2.5 m-long detonation tube. These dimensions are compatible with applications in the aircraft industry and, more particularly, in PDEs. Therefore, JP10 and decane were compared to choose the best candidate for liquid-fuel PDE studies. This paper was based on work that was presented at the 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Canada, July 31 – August 5, 2005.     

Spin dynamics investigated by EPR in the paramagnetic regime of La2/3Ca1/3Mn1−x Me x O3 (Me = Al, In) manganites

We report an electron paramagnetic resonance (EPR) investigation of the spin dynamics in the paramagnetic regime of the colossal magnetoresistive manganites La_2/3Ca_1/3Mn_1?x Me _x O₃ (Me=Al, In;x≤0.05). The temperature dependences of the EPR linewidth and integral intensity have been analyzed in terms of the bottleneck spin relaxation and small-polaron hopping models. The exchange coupling integral between Mn³⁺ and Mn⁴⁺ ions and the polaron activation energy decrease with increasing doping level. A discussion is given concerning the factors which could explain the observed changes.