Sensitive Adsorption Stripping Voltammetric Determination of Reserpine by a Glassy Carbon Electrode Modified with Multi-Wall Carbon Nanotubes

Adsorption stripping voltammetry, a very sensitive electroanalytical method, was employed to determine reserpine, a kind of anti-hypertensive drug. In 0.1M phosphate buffer with a pH of 6.0, reserpine was accumulated at a multi-wall carbon nanotubes (MWNT)-modified glassy carbon electrode (GCE) surface under the condition of open-circuit. In the following anodic sweep from 0.20 to 1.00V, reserpine, adsorbed at the MWNT-modified GCE surface, was oxidized and yielded a sensitive oxidation peak at 0.64V. Due to its unique structure and extraordinary properties, MWNT shows a ten times higher accumulation efficiency toward reserpine, compared with a bare GCE. Hence, the amount of reserpine at the MWNT-modified GCE surface increases significantly, and finally the oxidation peak current improves greatly. The experimental conditions, such as supporting electrolyte, pH value, the amount of MWNT-DHP suspension, accumulation time and scan rate, were optimized for the measurement of reserpine, and a sensitive electroanalytical method was proposed for reserpine determination. The oxidation peak current varies linearly with the concentration of reserpine over the range of 2×10^–8 to 1×10^–5M, and the detection limit is 7.5×10^–9M after 4min open-circuit accumulation. The relative standard deviation at 1×10^–6M reserpine was about 4.7% (n=7), indicating excellent reproducibility. This new method was successfully demonstrated with reserpine injections and tablets.     

Investigations of the EPR parameters for Sm3+ ions in KY3F10 and LiYF4 crystals

In this paper, we calculate the EPR parameters (g factors g parallel, g perpendicular and hyperfine structure constants A parallel, A perpendicular) of rare earth ion Sm3+ in fluoride crystals KY3F10 and LiYF4 from the perturbation formulas of EPR parameters for a 4f5 ion in tetragonal symmetry. In these formulas, the crystal-field J-mixing of the first and second excited-state multiplets 6H(7/2) and 6H(9/2) into the ground state multiplet 6H(5/2), the mixtures among the states with the same J value via spin-orbit coupling interaction and the interactions between the ground Kramers doublet Gammagamma and the same irreducible representation as Gammagamma in other 11 Kramers doublets Gammax within 6HJ (J=5/2, 7/2, 9/2) states via crystal-field and orbital angular momentum (or hyperfine structure) are considered. The calculated results (which are in agreement with the observed values) are discussed.     

Investigations of the g factors and hyperfine structure parameters for Er3+ ion in zircon-type compounds

The electron paramagnetic resonance (EPR) g factors g(parallel), g(perpendicular) and hyperfine structure parameters A(parallel), A(perpendicular) of the tetragonal Er3+ centers in zircon-type compounds YXO4 (X = As, P, V), ScVO4 and RSiO4 (R = Zr, Hf, Th) are calculated from the perturbation formulas of EPR parameters for 4f11 ion in tetragonal symmetry. In these formulas, the second-order perturbation contributions are included in addition to the first-order perturbation contributions considered in the previous papers. The crystal-field parameters used in the calculations are obtained by analyzing the optical spectral data from the superposition model. Although the superposition model intrinsic parameters An(R0) used in this paper for Er3+ in various zircon-type compounds are not as scattered as those in the previous paper, the calculated results of both the optical spectra and EPR parameters show better agreement than those in the previous paper with the observed values, suggesting that the above calculation method and parameters are more reasonable. The contributions of the second-order perturbation terms to EPR parameters are also discussed.     

Extraction Kinetics of Rare Earth Elements with sec—Octyl—phenoxy Acetic Acid

ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｗｅｌｌｋｎｏｗｎｔｈａｔｙｔｔｒｉｕｍｃａｎｂｅｕｓｅｄｉｎｍａｎｙｆｉｅｌｄｓ ,ｓｕｃｈａｓｍｅｔａｌｌｕｒｇｙ ,ｃｅｒａｍｉｃｓ ,ｌａｓｅｒｓａｎｄｅｌｅｃｔｒｏｎ ｉｃｓ ,ｅｓｐｅｃｉａｌｌｙｉｎｆｌｕｏｒｅｓｃｅｎｔｍａｔｅｒｉａｌｓｗｈｏｓｅｎｅｅｄｆｏｒｈｉｇｈｐｕｒｉｔｙｙｔｔｒｉｕｍｏｘｉｄｅｉｓｉｎｃｒｅａｓｉｎｇ .ＩｎＣｈｉｎａ ,ｔｈｅｒｅ ｓｏｕｒｃｅｏｆｙｔｔｒｉｕｍｉｓｒｉｃｈ ,ａｎｄｔｈｅｈｉｇｈｐｕｒｅｙｔｔｒｉｕｍｉｓｂｅ ｉｎｇｏ…     

用红外光谱法对热固性酚醛树脂固化过程的研究

用红外光谱法研究了四种热固性酚醛树脂在固化过程中的化学变化。结果表明热固性酚醛树脂的固化过程,首先是羟甲基发生缩合反应,缩合反应形成醚键是主要的。热固性酚醛树脂在进一步固化时(150—200°)出现了羰基,它的出现不是亚甲基氧化所致,而是部分醚键断裂形成了醛羰基。对热固性酚醛树脂的固化过程的机理进行了讨论。     

Chlorinated briarane-type diterpenoids from the gorgonian coral Ellisella robusta (Ellisellidae)

Four chlorinated metabolites featuring briarane carbon skeletons have been isolated from the gorgonian coral Ellisella robusta, which was collected off the coast of southern Taiwan: two new natural products, robustolides D (1) and E (2), and two known metabolites, robustolides F (3) and G (4). The structures of metabolites 1–4 were determined by spectroscopic methods, using 1D and 2D NMR in particular. The structures and absolute stereochemistry of robustolides D (1), F (3), and G (4) were directly established by X-ray diffraction analysis. Robustolide D (1) is the first metabolite of briarane-related natural products found to possess two halogen atoms.     

Novel composite polymer electrolytes based on poly(ether-urethane) network polymer and fumed silicas

Novel composite solid polymer electrolytes (CSPEs) and composite gel polymer electrolytes (CGPEs) have been prepared. CSPE consists of poly(ether-urethane) network polymer (PUN), fumed silicas and LiClO₄. The ionic conductivity of CSPEs can be enhanced nearly 20 times in comparison with the plain system without the addition of fumed silicas and can be above 1×10⁻⁵ S/cm at room temperature. The effects of both kinds of fumed silicas, viz. uSiO₂ with hydrophilic groups at the surface and mSiO₂ with hydrophobic groups at the surface on ionic conductivity were investigated. CGPE comprising of the CSPE and LiClO₄–PC solution with good mechanical strength exhibits ionic conductivity in the order of 10⁻³ S/cm at room temperature and above 3×10⁻⁴ S/cm at low temperature −40 °C.     

Polymerizable benzophenone derivatives for labeling vinyl acetate‐butylacrylate latex particles

We describe the synthesis and characterization of three new polymerizable benzophenone derivatives [2‐acryloxy‐5‐methyl benzophenone ( 8 ), 4′‐dimethylamino‐2‐acryloxy‐5‐methyl benzophenone ( 9 ), and 4′‐dimethylamino‐2‐(β‐acryloxyethyl)oxy‐5‐methyl benzophenone ( 10 )]. We show that these monomers can successfully be incorporated into vinyl acetate (VAc) copolymer latex particles. These particles were prepared by semicontinuous emulsion polymerization and mini‐emulsion polymerization of VAc with butylacrylate (BA) for VAc/BA = 4/1 by weight. The two monomers 9 and 10 bearing the 4′‐dimethylamino group satisfy the important spectroscopic criteria required of a dye to serve as an acceptor chromophore for nonradiative energy transfer from phenanthrene (Phe) as the donor. Their UV absorption spectra suggest significant overlap with the emission spectrum of Phe, which can be incorporated into P(VAc‐co‐BA) latex through copolymerization with 9‐acryloxymethyl Phe ( 2 ). In addition, these chromophores provide a window in their absorption spectra for excitation of the Phe chromophore at 300 nm. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3001–3011, 2002     

STRUCTURE CHARACTERIZATION AND CATALYTICACTIVITY TEST OF Ni(II) COMPLEXES CONTAINING2-(DIPHENYLPHOSPHINOAMINO) PYRIDINE(PAP)

IntroductionIn1962,N.V.Kutepow'SgroupfirstusedcomplexesofFe,CoandNiascatalyststocatalyzecarboXylationofethanoltopreparepropanoicacidanditsderivants.Thereactionpressurewashighandtheyieldwaslow.LateronPaulalsandhiscolleagueusedabC13andiodineascatalyst,which…     

Cluster synthesis. 42. The synthesis and crystal and molecular structures of the sulfur-bridged platinum-ruthenium carbonyl cluster compounds PtRu3(CO)9 L(PPh3)(μ3-S)2 (L=CO,PPh3) and PtRu4(CO)12(PPh3)(μ4-S)2

Two new mixed metal cluster complexes PtRu₃(CO)₁₀(PPh₃)(₃-S)₂,3 14% yield and PtRu₃(CO)₉(PPh₃)₂(₃-S)₂,4 23% yield were obtained from the reaction of Ru₃(CO)₉(₃-S)₂,1 with Pt(PPh₃)₂(C₂H₄) at 0°C. The cluster of4 consists of a spiked triangle of four metal atoms with two triply bridging sulfido ligands. The reaction of Ru₄(CO)₁₁(₄-S)₂,2 with Pt(PPh₃)₂(C₂H₄) yielded the expanded mixed-metal cluster complex PtRu₄(CO)₁₂(PPh₃)(₄-S)₂,5 in 12% yield. The structure of the cluster5 can be described as a pentagonal bipyramid of five metal atoms and two sulfido ligands with one metal-metal bond missing. Compounds4 and5 were characterized by a single-crystal X-ray diffraction analyses.