Kinetic limit of a conservative lattice gas dynamics showing long-range correlations

An anisotropic lattice gas dynamics is investigated for which particles on ^d jump to empty nearest neighbor sites with (fast) rate ^–2 in a specified direction and some particular configuration-dependent rates in the other directions. The model is translation and reflection invariant and is particle conserving. The space coordinate in the fast-rate direction is rescaled by ^–1. It follows that the density field converges in probability, as 0, to the corresponding solution of a nonlinear diffusion-type equation. The microscopic fluctuations about the deterministic macroscopic evolution are determined explicitly and it is found that the stationary fluctuations decay via a power law (1/r ^d ) with the direction dependence of a quadrupole field.     

Statistical mechanics of probabilistic cellular automata

We investigate the behavior of discrete-time probabilistic cellular automata (PCA), which are Markov processes on spin configurations on ad-dimensional lattice, from a rigorous statistical mechanics point of view. In particular, we exploit, whenever possible, the correspondence between stationary measures on the space-time histories of PCAs on ^d and translation-invariant Gibbs states for a related Hamiltonian on ( ^d+1). This leads to a simple large-deviation formula for the space-time histories of the PCA and a proof that in a high-temperature regime the stationary states of the PCA are Gibbsian. We also obtain results about entropy, fluctuations, and correlation inequalities, and demonstrate uniqueness of the invariant state and exponential decay of correlations in a high-noise regime. We discuss phase transitions in the low-noise (or low-temperature) regime and review Toom's proof of nonergodicity of a certain class of PCAs.     

Measurement of the B(+) production cross section in pp collisions at sqrt[s]=7 TeV

Measurements of the total and differential cross sections dσ/dp(T)(B) and dσ/dy(B) for B(+) mesons produced in pp collisions at sqrt[s]=7 TeV are presented. The data correspond to an integrated luminosity of 5.8 pb(-1) collected by the CMS experiment operating at the LHC. The exclusive decay B(+)→J/ψK(+), with J/ψ→μ(+)μ(-), is used to detect B(+) mesons and to measure the production cross section as a function of p(T)(B) and y(B). The total cross section for p(T)(B)>5 GeV and |y(B)|<2.4 is measured to be 28.1±2.4±2.0±3.1 μb, where the first uncertainty is statistical, the second is systematic, and the last is from the luminosity measurement.     

Steady state statistics of driven diffusions

We consider overdamped diffusion processes driven out of thermal equilibrium and we analyze their dynamical steady fluctuations. We discuss the thermodynamic interpretation of the joint fluctuations of occupation times and currents; they incorporate respectively the time-symmetric and the time-antisymmetric sector of the fluctuations. We highlight the canonical structure of the joint fluctuations. The novel concept of traffic complements the entropy production for the study of the occupation statistics. We explain how the occupation and current fluctuations get mutually coupled out of equilibrium. Their decoupling close-to-equilibrium explains the validity of entropy production principles.     

Aequorin-based functional assays for G-protein-coupled receptors,ion channels,and tyrosine kinase receptors

Aequorin is a photoprotein originating from jellyfish, whose luminescent activity is dependent on the concentration of calcium ions. Due to the high sensitivity and low background linked to luminescent assays, as well as to its absence of toxicity and its large linear dynamic range, aequorin has been used as an intracellular calcium indicator since its discovery in the early 1960s. The first applications of aequorin involved its microinjection in cells. The cloning of its gene in 1985 opened the way to the stable expression of aequorin in cell lines or even entire organisms. Here we present the validation of aequorin as a functional assay for the screening of G-protein-coupled receptors, ion channels, and tyrosine kinase receptors, as well as for their pharmacological characterization in agonist and antagonist detection assays. We optimized our cell suspension-based assay and determined that the most sensitive assay was performed at room temperature, with mitochondrially expressed aequorin and using coelenterazine derivative h for reconstitution of aequorin. The robustness of the assay and the current availability of luminometers with integrated injectors allow aequorin to fit perfectly with high throughput functional assays requirements.     

Ester-functionalized poly(3-alkylthiophene) copolymers: Synthesis,physicochemical characterization and performance in bulk heterojunction organic solar cells

The introduction of functional moieties in the donor polymer (side chains) offers a potential pathway toward selective modification of the nanomorphology of conjugated polymer:fullerene active layer blends applied in bulk heterojunction organic photovoltaics, pursuing morphology control and solar cell stability. For this purpose, two types of poly(3-alkylthiophene) random copolymers, incorporating different amounts (10/30/50%) of ester-functionalized side chains, were efficiently synthesized using the Rieke method. The solar cell performance of the functionalized copolymers was evaluated and compared to the pristine P3HT:PCBM system. It was observed that the physicochemical and opto-electronic characteristics of the polythiophene donor material can be modified to a certain extent via copolymerization without (too much) jeopardizing the OPV efficiency, as far as the functionalized side chains are introduced in a moderate ratio (<30%) and that preference is given to side chains with a small molar volume. A range of complementary techniques – UV–Vis spectroscopy, (modulated temperature) differential scanning calorimetry, transmission electron microscopy and X-ray diffraction analysis – indicated that variations in polymer crystallinity, while maintaining a high level of regioregularity, are probably the main factor responsible for the observed differences.     

An augmented reality system for patient-specific guidance of cardiac catheter ablation procedures

We present a system to assist in the treatment of cardiac arrhythmias by catheter ablation. A patient-specific three-dimensional (3-D) anatomical model, constructed from magnetic resonance images, is merged with fluoroscopic images in an augmented reality environment that enables the transfer of electrocardiography (ECG) measurements and cardiac activation times onto the model. Accurate mapping is realized through the combination of: a new calibration technique, adapted to catheter guided treatments; a visual matching registration technique, allowing the electrophysiologist to align the model with contrast-enhanced images; and the use of virtual catheters, which enable the annotation of multiple ECG measurements on the model. These annotations can be visualized by color coding on the patient model. We provide an accuracy analysis of each of these components independently. Based on simulation and experiments, we determined a segmentation error of 0.6 mm, a calibration error in the order of 1 mm and a target registration error of 1.04 +/- 0.45 mm. The system provides a 3-D visualization of the cardiac activation pattern which may facilitate and improve diagnosis and treatment of the arrhytmia. Because of its low cost and similar advantages we believe our approach can compete with existing commercial solutions, which rely on dedicated hardware and costly catheters. We provide qualitative results of the first clinical use of the system in 11 ablation procedures.     

ESD–RF co-design methodology for the state of the art RF-CMOS blocks

This paper describes an approach to design ESD protection for integrated low noise amplifier (LNA) circuits used in narrowband transceiver front-ends. The RF constraints on the implementation of ESD protection devices are relaxed by co-designing the RF and the ESD blocks, considering them as one single circuit to optimise. The method is applied for the design of 0.25 μm CMOS LNA. Circuit protection levels higher than 3 kV HBM stress are achieved using conventional highly capacitive ggNMOS snapback devices. The methodology can be extended to other RF-CMOS circuits requiring ESD protection by merging the ESD devices in the functionality of the corresponding matching blocks.     

Write/erase degradation in source side injection flash EEPROM's:characterization techniques and wearout mechanisms

In this paper, an in-depth analysis is presented of the write/erase degradation in Source Side Injection Flash EEPROM cells, using the HIMOS cell as a typical example. The different mechanisms governing the degradation are studied and quantified by combining UV erasure and I-V measurements with a charge pumping analysis. Both procedures are shown to disclose two effects contributing to the change of the threshold voltage window: a change in the amount of charge on the floating gate due to a decrease in the injection current, accompanied by the series effect of oxide and interface charges locally trapped above the channel. By correlating the results from charge pumping and I-V measurements, an estimate is made of the spatial extent of the damaged region     

Embedded HIMOS(R) flash memory in 0.35 μm and 0.25 μm CMOStechnologies

In this paper, the performance and reliability characteristics of the 0.35 μm/0.25 μm High Injection MOS (HIMIOS(R)) technology is described in detail. This flash EEPROM technology relies on source-side injection for programming and Fowler-Nordheim tunneling for erasing, and has been successfully implemented in a 1 Mbit memory array embedded in a 0.35 μm CMOS technology, adding only about 30% to the processing cost of digital CMOS. Due to its triple gate structure, the HIMOS(R) cell exhibits a high degree of flexibility and scalability. A fast programming operation (10 μs) at 3.3 V supply voltage is combined with an endurance of well over 100000 program/erase cycles, immunity to all possible disturb effects and a retention time that largely exceeds 100 years at 125°C. Furthermore, the cell has been scaled to a 0.25 μm version, which is a laterally scaled version with the same operating voltages and tunnel oxide thickness. The use of secondary impact ionization is investigated as well and proves to be very promising for future generations when the supply voltage is scaled below 2.5 V