Simplex optimization of the separation of phospholipids by high-pressure liquid chromatography

A simplex procedure is shown to be an efficient approach for solving separation problems. The best solvent ratio for the separation of phosphatidylcholine and sphingomyelin has been found by means of a two-dimensional simplex capable of expansion and contraction. A successful high-pressure liquid chromatography separation of lysophosphatidylcholine, phoaphatidylethanolamine, phosphatidylinositol, phosphatidylserine, phosphatidylcholine, sphingomyelin and phosphatidic acid was achieved with a 180-cm column packed with Corasil II and a solvent mixture of chloroform—methanol—ammonia (50.0:35.9:7.0, v/v/v).     

Solubility of carbazole in binary chloroalkane + dibutyl ether solvent mixtures

Solubilities are reported for carbazole in three binary chloroalkane + dibutyl ether solvent mixtures at 25°C. Results of these measurements are compared with solution models developed for solubility in systems containing specific solute-solvent interactions. A simple model based on a single 1:1 carbazole:dibutyl ether complex described the solubility data, though the calculated equilibrium constant was about one-half of values published previously. A more sophisticated solution model, which assumes both carbazole:dibutyl ether and carbazole:chloroalkane complexes, was needed to thermodynamically describe the systems studied. Equilibrium constants for three presumed carbazole:chloroalkane complexes are calculated from measured carbazole solubilities.     

One-carbon chain extension of esters to alpha-chloroketones: a safer route without diazomethane

The reaction of a variety of methyl esters with dimethylsulfoxonium methylide at 0-25 degrees C affords the chain-extended beta-keto dimethylsulfoxonium ylides. Subsequent treatment with hydrogen chloride in THF proceeds with loss of DMSO to afford the corresponding alpha-chloroketones. This sequence has been utilized to convert the methyl esters of CBZ-protected alanine and valine to the anti N-protected alpha-amino epoxides, which are important pharmaceutical intermediates. When the same protocol is applied to BOC-protected phenylalanine methyl ester, epimerization occurs so that the use of a more reactive aryl ester is required. This chemistry provides a practical route to alpha-chloroketones that avoids the use of toxic and explosive diazomethane.     

Four levels of pattern recognition

Problems of pattern recognition in chemistry and other subjects can be divided conveniently into four different types depending on the level of scope of the problem.(1) Classification into one of a number of defined classes. As an example blood samples taken from persons known to be either controls or welders are considered. The problem is whether trace element concentrations in these samples contain information on whether or not a person is a welder.(2) Level 1 plus the possibility that an object is an outlier, i.e. does not belong to any of the defined classes. As an example, the üse of ¹³C-n.m.r. data to decide whether 2-substituted norbornanes have the exo or endo structure is discussed. (2A) Level 2, asymmetric. This situation occurs when one class does not have a systematic structure, but another class is homogeneous and can be described by a level 2 model. This occurs in the classification of materials or compounds as good or bad, active or inactive, and in binary classifications. As an example the use of trace element data to classify steel samples as having good or poor properties of strength is discussed.(3) Level 2 plus the ability to relate the variables measured to external properties of continuous character. As an example, the classification of a series of chemical compounds as β -receptor blockers, β -receptor stimulants, or neither, on the basis of their structural variables is discussed. In addition, relations between these structural variables and the measured biological activity are sought within each of the two classes.(4) Level 3 with the difference that several external property variables in the objects are measured. It may be desirable to use variables of the objects both for classification and for relations to several property variables: such examples are numerous in analytical chemistry.     

Surface enrichment of proteins at quartz/water interfaces: a neutron reflectivity study

Neutron reflectivity (NR) was used to study the adsorption of human serum albumin and human fibrinogen on quartz. The proteins were individually and sequentially adsorbed from heavy water and heavy water/methanol mixtures at pH 4 and 7.0. The technique allows for the subnanometer resolution of the adsorbed layer thickness and gross morphology. Under the conditions of our measurements we found that fibrinogen formed a distinct layer that we interpret as a mat of the protein three layers thick whereas albumin formed only diffuse layers. The adsorption pattern of the two proteins changed radically when one protein was adsorbed on top of the other (previously adsorbed). In general our measurements indicate that the adsorbed protein layers on quartz are rather loosely bound and that these layers, incorporating as much as 80% water, extend further into the bulk fluid than might have been expected.     

Obtusin,a unique bromine-containing polycyclic ketal from the red marine alga Laurenciaobtusa

The structure of a unique bromine-containing ketal, obtusin ($\text{1}$), has been determined by spectral and X-ray crystallographic techniques. Obtusin is a natural component of the Mediteranean red alga $\text{Laurencia}$$\text{obtusa}$.     

Electrochemical Detection of MS2 Phage Using a Bead‐based Immunoassay and a NanoIDA

A microbead based sandwich immunoassay for MS2 bacteriophage was developed using an interdigitated array (IDA) electrode with nanoscale dimensions (220 nm electrode width, 620 nm gap). The IDA was fabricated using an electron beam lithographic lift‐off technique. After an antibody‐assisted capture of MS2 using paramagnetic microbeads, a β‐galactosidase labeled secondary antibody was used to convert p‐aminophenyl‐β‐D ‐galactopyranoside (PAPG) into the redox active p‐aminophenol (PAP). Amperometric detection of PAP with IDA electrodes at +300 and ?200 mV vs. a Ag/AgCl reference electrode was used to measure the result, detecting MS2 concentrations as low as 10 ng/mL.     

Synthesis and NMR studies of (13)C-labeled vitamin D metabolites

Isotope-labeled drug molecules may be useful for probing by NMR spectroscopy the conformation of ligand associated with biological hosts such as membranes and proteins. Triple-labeled [7,9,19-(13)C(3)]-vitamin D(3) (56), its 25-hydroxylated and 1 alpha,25-dihydroxylated metabolites (58 and 68, respectively), and other labeled materials have been synthesized via coupling of [9-(13)C]-Grundmann's ketone 39 or its protected 25-hydroxy derivative 43 with labeled A ring enyne fragments 25 or 26. The labeled CD-ring fragment 39 was prepared by a sequence involving Grignard addition of [(13)C]-methylmagnesium iodide to Grundmann's enone 28, oxidative cleavage, functional group modifications leading to seco-iodide 38, and finally a kinetic enolate S(N)2 cycloalkylation. The C-7,19 double labeling of the A-ring enyne was achieved by the Corey-Fuchs/Wittig processes on keto aldehyde 11. By employing these labeled fragments in the Wilson-Mazur route, the C-7,9,19 triple-(13)C-labeled metabolites 56, 58, and 68 as well as other (13)C-labeled metabolites have been prepared. In an initial NMR investigation of one of the labeled metabolites prepared in this study, namely [7,9,19-(13)C(3)]-25-hydroxyvitamin D(3) (58), the three (13)C-labeled carbons of the otherwise water insoluble steroid could be clearly detected by (13)C NMR analysis at 0.1 mM in a mixture of CD(3)OD/D(2)O (60/40) or in aqueous dimethylcyclodextrin solution and at 2 mM in 20 mM sodium dodecyl sulfate (SDS) aqueous micellar solution. In the SDS micellar solution, a double half-filter NOESY experiment revealed that the distance between the H(19Z) and H(7) protons is significantly shorter than that of the corresponding distance calculated from the solid state (X-ray) structure of the free ligand. The NMR data in micelles reveals that 58 exists essentially completely in the alpha-conformer with the 3 beta-hydroxyl equatorially oriented, just as in the solid state. The shortened distance (H(19Z))-H(7)) in micellar solutions as compared to that in the solid state is most easily rationalized on the basis that the 5(10)-torsion angle in 58 is decreased in micellar solutions as compared to that in the solid state.     

The foam analogy: from phases to elasticity

By mapping the interactions of colloidal particles onto the problem of minimizing areas, the physics of foams can be used to understand the phase diagrams of both charged and fuzzy colloids. We extend this analogy to study the elastic properties of such colloidal crystals and consider the face-centered cubic, body-centered cubic and A15 lattices. We discuss two types of soft interparticle potentials corresponding to charged and fuzzy colloids, respectively, and we analyze the dependence of the elastic constants on density as well as on the parameters of the potential. We show that the bulk moduli of the three lattices are generally quite similar, and that the shear moduli of the two non-close-packed lattices are considerably smaller than in the face-centered cubic lattice. We find that in charged colloids, the elastic constants are the largest at a finite screening length, and we discuss a shear instability of the A15 lattice.     

Spectral Properties of Fluorescein in Solvent-Water Mixtures: Applications as a Probe of Hydrogen Bonding Environments in Biological Systems

Although fluorescein is a widely used fluorescent probe in the biosciences, the effect of solvent environment on its spectral properties is poorly understood. In this paper we explore the use of fluorescein as a probe of the state of hydrogen bonding in its local environment. This application is based on the observation, originally made by Martin ( Chem. Phys. Lett . 35, 105–111, 1975), that the absorption maximum of fluorescein undergoes substantial shifts in organic solvents related to the hydrogen bonding power of the solvents. We have extended this work by studying the spectral properties of the dianion form of the probe in solvent–water mixtures. We show that the magnitude of the shift correlates with the α and β parameters of Kamlet and Taft ( J. Am. Chem. Soc . 98, 377–383; 2886–2894, 1976), which provide a scale of the hydrogen bond donor acidities and acceptor basicities, respectively, of the solvents. In solvent–water mixtures, these shifts reflect general effects of the solvents on the hydrogen bonding environment of the fluorescein through water–solvent hydrogen bonding and specific effects due to fluorescein–solvent hydrogen bonding. Indeed, both the absorption and fluorescence properties appear to be dominated by these effects indicating that the spectral shifts of the dianion can be used as an indicator of its hydrogen bonding environment. We discuss the application of fluorescein as a probe of hydrogen bonding in the microenvironment immediately surrounding the fluorophore, and we illustrate the effect with reference to the fluorescein–antifluorescein antibody complex where it appears that antibodies selected during the immune response possess binding sites that are increasingly dehydrated and hydrophobic.