Effects of hysteretic and aerodynamic damping on supersonic panel flutter of composite plates

The governing equation for the finite element analysis of the panel flutter of composite plates including structural damping is derived from Hamilton's principle. The first order shear deformable plate theory has been applied to structural modelling so as to obtain the finite element eigenvalue equation. The unsteady aerodynamic load in a supersonic flow is computed by using the linear piston theory. The critical dynamic pressures for composite plates have been calculated to investigate the effects of structural damping on flutter boundaries. The effects are dependent on fiber orientation because flutter mode can be weak or strong in the fiber orientation of composite plates. Structural damping plays an important role in flutter stability with low aerodynamic damping but would not affect the flutter boundary with high aerodynamic damping.     

VLSI architectural design tradeoffs for sliding-window log-MAP decoders

Turbo codes have received tremendous attention and have commenced their practical applications due to their excellent error-correcting capability. Investigation of efficient iterative decoder realizations is of particular interest because the underlying soft-input soft-output decoding algorithms usually lead to highly complicated implementation. This paper describes the architectural design and analysis of sliding-window (SW) Log-MAP decoders in terms of a set of predetermined parameters. The derived mathematical representations can be applied to construct a variety of VLSI architectures for different applications. Based on our development, a SW-Log-MAP decoder complying with the specification of third-generation mobile radio systems is realized to demonstrate the performance tradeoffs among latency, average decoding rate, area/computation complexity, and memory power consumption. This paper thus provides useful and general information on practical implementation of SW-Log-MAP decoders.     

Study of warpage due to P-V-T-C relation of EMC in IC packaging

There were many studies about the prediction of warpage due to thermal mismatch , . However, cure induced warpage is usually ignored and the results can be inaccurate. To minimize this problem, a thorough understanding of epoxy molding compound (EMC) with pressure-volume-temperature-cure (P-V-T-C) relation is necessary. This paper used the P-V-T-C relation of an encapsulation material to formulate the stress-strain relationship. With the help of finite element method (FEM) and mold flow analysis, warpage predictions combined with P-V-T-C relation were performed and the results show that this approach is practical. For a given P-V-T-C relation, the shrinkage direction is pointing toward the gate and maximum warpage usually occurs at the boundary of an integrated circuit (IC) package. Variation of specific volume difference along the flow direction is larger than that perpendicular to the flow direction. When temperature difference is small in thickness direction, specific volume difference in thickness direction varies only slightly.     

On Striping Traffic over Multiple IEEE 802.11(b) Wireless Channels

Due to interference, path loss, multipath fading, background noise, and many other factors, wireless communication normally cannot provide a wireless link with both a high data rate and a long transmission range. To address this problem, striping network traffic in parallel over multiple lower-data-rate but longer-transmission-range wireless channels may be used. In this paper, we propose a new striping method and evaluate its performances over multiple IEEE 802.11(b) channels under various conditions. Our extensive simulation results show that this method is quite effective for such an application. S.Y. Wang is an Associate Professor of the Department of Computer Science and Information Engineering at National Chiao Tung University, Taiwan. He received his Master and Ph.D. degree in computer science from Harvard University in 1997 and 1999, respectively. His research interests include wireless networks, Internet technologies, network simulations, and operating systems. He is the author of the NCTUns 2.0 network simulator and emulator, which is being widely used by network and communication researchers. More information about the tool is available at http://NSL.csie.nctu.edu.tw/nctuns.html. C.H. Hwang received his master degree in computer science from NCTU in 2002 and currently is working for a network company. C.L. Chou currently is a third-year Ph.D. student at the Department of Computer Science and Information Engineering, National Chiao TungUniversity (NCTU), Taiwan. He received his master degree in computer science from NCTU in 2002.     

Efficient OVSF code assignment and reassignment strategies in UMTS

This paper presents an integrated solution for code management, assignment, and reassignment problems in UMTS. We propose a new architecture for code management and, based upon this new architecture, a code assignment strategy, referred to as "crowded-group first strategy". Our system architecture and code assignment strategy represent significant improvements both in the time complexity and the maintenance complexity. Moreover, the code blocking probability of the crowded-group first strategy is competitive to that of the other strategies. In this paper, we also propose a new code reassignment strategy, called the "crowded-branch first strategy". The main objective of this reassignment strategy is to reduce reassigned call probability with low computation overhead and extend this strategy for the general case. In order to systematically analyze the performances of the code assignment strategy, we implement a simulator to analyze the code selection behavior and code blocking probability of each strategy. Moreover, we propose some new performance metrics, named "weighted code blocking", "reassigned call probability", and "ratio of actual code reassignments", in order to precisely measure the performance obtained by different strategies. From the simulation results, we show that our proposed strategies efficiently utilize the OVSF codes with low computation overhead.     

A second-order accurate numerical method for a fractional wave equation

We study a generalized Crank–Nicolson scheme for the time discretization of a fractional wave equation, in combination with a space discretization by linear finite elements. The scheme uses a non-uniform grid in time to compensate for the singular behaviour of the exact solution at t = 0. With appropriate assumptions on the data and assuming that the spatial domain is convex or smooth, we show that the error is of order k ² + h ², where k and h are the parameters for the time and space meshes, respectively.     

Quantum wire heterostructure for optoelectronic applications

Quantum wire (QWR) heterostructures suitable for optoelectronic applications should meet a number of requirements, including defect free interfaces, large subband separation, long carrier lifetime, efficient carrier capture. The structural and opticl properties of GaAs/AlGaAs and InGaAs/GaAs quantum wire (QWR) heterostructures grown by organometallic chemical vapor deposition on nonplanr substrates, which satisfy many of these criteria, are described. These crescent-shaped QWRs are formed in situ during epitaxial growth resulting in virtually defect free interfaces. Effective wire widths as small as 10nm have been achieved, corresponding to electron subband separations greater than K_BT at room temperature. The enhanced density of states at the QWR subbands manifests itself in higher optical absorption and emission as visualized in photoluminescence (PL), PL excitation, amplified spontaneous emission and lasing spectra of these structures. Effective carrier capture into the wires via connected quantum well regions, which is important for enhancing the otherwise extremely small capture cross section of these wires, has also been observed. Room temperature operation of GaAs/AlGaAs and strained InGaAs/GaAs QWR lasers with threshold currents as low as 0.6mA has been demonstrated.     

Diffraction by a wedge at skew incidence: integral representations of Cauchy-Carleman for the electromagnetic fields

An electromagnetic diffraction problem in a wedge shaped region is reduced to a system of coupled functional difference equations by means of Sommerfeld integrals and Malyuzhinets theorem. By introducing an integral operator it is shown that the solutions of this system of functional equations can be defined in terms of integral representations whose kernels are solutions of a singular integral equation of Cauchy-Carleman type for which an explicit solution is given.     

Adaptive median filters: new algorithms and results

Based on two types of image models corrupted by impulse noise, we propose two new algorithms for adaptive median filters. They have variable window size for removal of impulses while preserving sharpness. The first one, called the ranked-order based adaptive median filter (RAMF), is based on a test for the presence of impulses in the center pixel itself followed by a test for the presence of residual impulses in the median filter output. The second one, called the impulse size based adaptive median filter (SAMF), is based on the detection of the size of the impulse noise. It is shown that the RAMF is superior to the nonlinear mean L(p) filter in removing positive and negative impulses while simultaneously preserving sharpness; the SAMF is superior to Lin's (1988) adaptive scheme because it is simpler with better performance in removing the high density impulsive noise as well as nonimpulsive noise and in preserving the fine details. Simulations on standard images confirm that these algorithms are superior to standard median filters.