Calculation of the surface energy of bcc transition metals by using the second nearest-neighbor modified embedded atom method

The surface energies for 24 surfaces of all bcc transition metals Fe, Cr, Mo, W, V, Nb and Ta have been calculated by using the second nearest-neighbor modified embedded atom method. The results show that, for all bcc transition metals, the order among three low-index surface energies E_(1 1 0) < E_(1 0 0) < E_(1 1 1) is in agreement with experimental results and E_(1 1 0) is also the lowest surface energy for various surfaces. So that from surface energy minimization, the (1 1 0) texture should be favorable in the bcc films. This is also consistent with experimental results. The surface energy for the other surfaces increases linearly with increasing angle between the surfaces (h k l) and (1 1 0). Therefore, a deviation of a surface orientation from (1 1 0) can be used to estimate the relative values of the surface energy.     

Characteristics of soft magnetic composite material under rotating magnetic fluxes

This paper reports the measurement of magnetic properties of the soft magnetic composite material SOMALOY^TM 500 in a square sample under different patterns of flux density with 2D magnetic excitations. The test system, principle of measurement, magnetic power loss calculation, and methods of correction for misalignment of H surface sensing coils are presented. The experimental results show that although nominally isotropic, the SOMALOY^TM 500 sample exhibits some anisotropy. The results are useful in the design and performance analysis of rotating electrical machines.     

电致伸缩陶瓷微位移器非线性的数值方法补偿

本文通过对电致伸缩陶瓷材料的非线性进行分析。找到了补偿电致伸缩陶瓷非线性的数值方法，并对不同回程大小的电滞回线进行了分段处理，使补偿结果更为精确。     

高性能IGBT模块的设计考虑

本文对ＩＧＢＴ模块中功率芯片（ＩＧＢＴ和续流二极管）的优化设计进行了讨论。通过优化几个重要的工艺参数并改进器件的结构，ＩＧＢＴ不仅有足够的短路容量，而且正向压降与电流下降时间之间可实现最佳折衷。另外，续流二极管的反向恢复特性也有明显改善。通过采用衬底控制技术，ＩＧＢＴ模块的输出特性不受温度的影响，输出电流更稳，输出阻抗更高。本文详细介绍了整个设计考虑。     

Use of the Apparent Content Curves for the spectrophotometric identification of substances: identification of amphetamines

The possibility of identification of substances which have similar spectral behaviour by means of Apparent Content Curves has been studied. This study is carried out with absorption, excitation and emission spectra of several amphetamines of widespread pharmaceutical use. Results obtained show that amphetamine, phenylpropanolamine, pseudoephedrine, phenylephrine, epinephrine, dopamine and methoxyamphetamine can be identified with a probability of >95%.     

Determination of glycols by HPLC with refractive index detection

A simple and fast HPLC method for the determination of glycols is described. It is characterized by a reversed-phase separation using water as eluent and a refractive index detection. The method was applied to investigate the biodegradation of glycols in a laboratory activated sludge plant and to determine the content of glycols or alcohols in detergents. The detection limit is 4 mg/l ethylene glycol or propylene glycol in an aqueous sample.     

Raman spectroscopy of carbon fibres

Investigations of coated carbon fibres are reported using Raman spectroscopy. Relationships between different process parameters (for example precursor concentration, reactor temperature and various precursors) and the resulting types of carbon fibres are discussed.     

Comparison of four quantification methods for the determination of PCB in transformer oils

The analysis of PCB in transformer oils has been achieved with three HRGC/ECD based methods, proposed by the International Electrotechnical Commission (IEC/TC 10), by the Comité Européen de Normalisation (CEN/TC 19/WG 22) and by the Deutsches Institut für Normung (DIN 51 527). The same clean-up, described in the CEN/TC 19/WG 22, has been used for all the samples, allowing a comparison of the quantification procedure only. The total chlorine content has also been determined with X-ray fluorescence. These different methods of quantification are compared and their application for legislative purposes is discussed.Dedicated to Professor Dr Dieter Klockow on the occasion of his 60th birthday     

Preconcentration of trace antimony in tap and sea water on activated alumina. Determination by graphite furnace atomic absorption spectrometry

Summary A method is described for antimony preconcentration based on retention on a column of activated alumina. Recovery is 80% when no pH-control and 4 mol/l HCl as eluent are used. The preconcentration factor is 400. The method was applied to the determination of antimony in spiked tap and sea water. The analytical performance of the method is discussed.     

TEM investigations on PECVD-titanium carbide layers

TiC_x-PECVD-layers were characterized by TEM. EDX analysis and electron diffraction. TiC_x-layers deposited using benzene showed a columnar structure, at which the column size decreases with rising excess carbon content. TiC_x-layers deposited using n-heptane presented a lamellar structure, at which the lamellar thickness diminishes with an increasing excess carbon content. In dependence on the layer thickness a periodic progress of the element contents was observed, at which a maximum for Ti and Cl correlates with a minimum for C. It was found that the incorporated chlorine is bonded to titanium. The lattice parameter depends on the chlorine content. Using TiCl₄/H₂/Ar-gas mixtures without any hydrocarbon, layers containing TiH₂ are formed.