Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.     

一种基于神经网络的模糊推理方法

对于Zadeh的模糊关系合成法则（简称CRI方法），选择一个适宜蕴涵关系矩阵是至关重要的。通常蕴涵关系矩阵的元素值是通过一个所构造的数学表达式计算的，或是由领域专家凭经验直接给出。然而，有时，特别是对于后一种情形，CRI法不能满足模糊推理最基本的一致性要求。文章构造了一个神经网络用于模糊推理，新方法不仅是CRI方法的推广，而且远比CRI方法易于满足推理的一致性要求。得益于神经网络的长处，新方法具有灵活性、可调性。文章给出了权值的具取值法。     

半群K(n,r)中的幂等生成元

设Singn是由一个n元集上的所有奇异变换所构成的奇异变换半群，I是由Singn中一些亏数为1的幂等元组成的集合，Howie利用有向图证明了：I是Singn的一个生成集当且仅当与其相应的有向图D（I）是强连通的完全图，本文利用多重有向图将这一结果推广到Singn的每个理想K（,r)上。     

Training sequence design and channel estimation of OFDM-CDMA broadband wireless access networks with diversity techniques

In this paper, an OFDM-CDMA system employing various diversity schemes is considered for a possible candidate of broadband wireless access networks and broadcasting applications. With an emphasis on a preamble design for multi-channel separation, we address a channel estimation based on the time-domain windowing and its imperfectness in OFDM-based multiple-antenna transmission systems. By properly designing each preamble for multiple antennas to be orthogonal in the time domain, the channel estimation can be applied to the HIPERLAN/2 and IEEE 802.11a standards in the case of more than two transmit antennas. Also, the effect of diversity techniques on the performance of OFDM-CDMA based broadband wireless access networks is investigated and the maximum achievable diversity gain for a two-path Rayleigh fading environment is evaluated. Simulation results show that the OFDM-CDMA system applying a space-time-frequency diversity with a full-rate full diversity code can give the diversity of D=4 and D=8 for both multi-user cases of maximum user and half user capacities, respectively.     

Determination of optical nonlinearities in Cu(mpo)2 by Z-scan technique

The optical nonlinearities of Cu(mpo)₂ [formula = C₁₀H₈N₂CuO₂S₂] complex have firstly been investigated by using the Z-scan technique with a nanosecond-pulsed Nd:YAG laser at its second harmonic (532 nm) radiation. The nonlinear optical absorption and refraction coefficients of Cu(mpo)₂ have been measured with the different on-axial peak irradiances I ₀ at the waist ranging from 0.48 to 5.66 GW/cm². The nonlinear transmittance characteristics exhibit the near resonant two-photon absorption (TPA) at 532 nm and are explained by a population redistribution model. The nonlinear absorption originates from the near resonant TPA while the mechanism of the nonlinear refraction is the near resonant TPA transition enhancement. The linear increasing dependences of the optical nonlinearities on the incident irradiance arise from the population redistribution due to the near resonant TPA.     

Correlation between Al2O3 particles and interface of Al-Al2O3 coatings by cold spray

Al-Al₂O₃ composite coatings with different Al₂O₃ particle shapes were prepared on Si and Al substrate by cold spray. The powder compositions of metal (Al) and ceramic (Al₂O₃) having different sizes and agglomerations were varied into ratios of 10:1 wt% and 1:1 wt%. Al₂O₃ particles were successfully incorporated into the soft metal matrix of Al. It was found that crater formation between the coatings and substrate, which is typical characteristic signature of cold spray could be affected by initial starting Al₂O₃ particles. In addition, when the large hard particles of fused Al₂O₃ were employed, the deep and big craters were generated at the interface between coatings and hard substrates. In the case of pure soft metal coating such as Al on hard substrate, it is very hard to get proper adhesion due to lack of crater formation. Therefore, the composite coating would have certain advantages.     

Synthesis of MgAl2O4 Spinel Nanometer Powder via Biology Polysaccharide Assisted Sol-Gel Process

A novel and cost-effective sol-gel process for preparation of MgAl₂O₄ spinel nanometer powders has been developed in this study. A solution of magnesium and aluminum nitrates in stoichiometric proportion was successfully embraced in the biology polysaccharide gel network, formed by the synergistic interaction between xanthan gum (XG) and locust bean gum (LBG) utilizing their broad-spectrum stability of salt tolerance and character of transformation from sol to gel on the condition of proper temperature and relative proportion of polymeric components. Dry gel could be obtained by vacuum dehydration of aqueous gel at low temperatures. Monolithic MgAl₂O₄ spinel nanometer powders were produced by calcining the dry gel above 800°C, with average crystallite size of 20 nanometers.