Effects of physical aging on yielding kinetics of polycarbonate

The purpose of this work was to investigate the effects of physical aging on the kinetics of yielding in polycarbonate. PC samples were annealed over a wide range of aging times and temperatures. Both tensile and compressive tests were performed over various loading rates and temperatures to analyze the effects of aging time and aging temperature on yielding kinetics. Two grades of polycarbonate, Makrolon, of different molecular weights, PC-2608 (low M_w), and PC-3208 (high M_w), supplied by Bayer were analyzed. In unaged condition, PC is hard and tough, but after aging, it becomes more brittle. In terms of molecular movement, the yielding process is a thermally activated process involving inter- and intra-molecular motions. The time–temperature dependence of yielding behavior can be separated into two regions. Aging does not affect localized molecular motions of the β process during yielding. Physical aging in PC results in a slower jump rate of the main segments of macromolecules between two equilibrium positions. It reduces the flexibility of the macromolecules and thus, makes the polymer more brittle. Heat aging also causes a decrease of the entropy (ΔS) in polycarbonate, and this decrease is more important when the molecular weight is reduced. Increasing the annealing time and temperature results in a continuous reduction of ΔS. The rate of aging decreases with decreasing annealing temperature and below about 30 °C, no aging takes place. Annealing also strongly affects the excess of enthalpy in PC. However the effect of physical aging on yielding differs to that on enthalpy excess. The kinetics of yielding and aging processes in polycarbonate are also different. An increase in the strain rate does not have the same effect on the yield stress as an increase in the aging time by a same factor.     

Development of a Profit-Based Air Cargo Loading Information System

In today's competitive logistics business environment, airfreight forwarders need to optimize every aspect of their logistics operations. However, forwarders still heavily rely on human brain and working experiences for calculating complex cargo packing and scheduling problems. Although recent research studies related to cargo packing and scheduling problems have resulted in the development of a number of advanced techniques of cargo planning, it can be seen that most of the research work is focused on the optimization of space in order to achieve the maximum possible amount of cargo to be packed in the minimum of space. After numerous site evaluation and end-user feedbacks, it is found that space optimization does not necessarily cause profit optimization, which is the ultimate aim of logistics providers. A study of contemporary research publications indicates that there are inadequate research studies related to profit-based optimization in cargo packing areas. This paper presents a profit-based air cargo loading information system (ACLIS) that embeds an innovative technology known as heuristics iterative reasoning technology (HIRT) that supports loading plan generation, focusing on maximization of the profit margin. In general, the proposed system is meant to maximize the profit in the airfreight forwarding business. It adopts an objective function governed by a list of constraints together with rule-based reasoning to provide expert advice to support the generation of appropriate loading plans     

A tight upper bound on discrete entropy

The standard upper bound on discrete entropy was derived based on the differential entropy bound for continuous random variables. A tighter discrete entropy bound is derived using the transformation formula of Jacobi theta function. The new bound is applicable only when the probability mass function of the discrete random variable satisfies certain conditions. Its application to the class of binomial random variables is presented as an example     

Multigrid computation for curve fitting in the wavelet domain

A multi-layer multigrid algorithm for curve fitting in the wavelet domain is presented. This algorithm is achieved by applying a wavelet transform to each grid of the conventional multigrid structure. Using a wavelet transform, the convergent rate in each grid is improved and the total system can converge more quickly     

4- and 13-GHz tuned amplifiers implemented in a 0.1-μm CMOStechnology on SOI, SOS, and bulk substrates

Four- and 13-GHz tuned amplifiers have been implemented in a partially scaled 0.1-1 μm CMOS technology on bulk, silicon-on-insulator (SOI), and silicon-on-sapphire (SOS) substrates. The 4-GHz bulk, SOI, and SOS amplifiers exhibit forward gains of 14, 11, and 12.5 dB and F_min's of 4.5 (bulk) and 3.5 db (SOS). The 13-GHz SOS and SOI amplifiers exhibit gains of 15 and 5.3 dB and F_unn's of 4.9 and 7.8 dB. The 4-GHz bulk amplifier has the highest resonant frequency among reported bulk CMOS amplifiers, while the 13-GHz SOS and SOI amplifiers are the first in a CMOS technology to have tuned frequencies greater than 10 GHz. These and other measurement results suggest that it may be possible to implement 20-GHz tuned amplifiers in a fully scaled 0.1-1 μm CMOS process     

Eight-channel bidirectional WDM add/drop multiplexer

The authors propose and demonstrate an eight-channel reconfigurable bidirectional wavelength division multiplexed (WDM) add-drop multiplexer in which all channels can be added/dropped independently in either direction. The performance of the bidirectional WDM add/drop multiplexer is experimentally studied for a data rate of 10 Gbit/s per channel, providing an overall capacity of 80 Gbit/s. It is found that the performance of the add/drop multiplexer is not degraded by a backward propagating signal     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

Irradiation-induced reduction and luminescence properties of Sm doped in BaBPO5

Usually, Sm²⁺ ions could be reduced by heating the materials in reducing atmospheres. Exposure to ionizing radiations is also known to cause Sm³⁺→Sm²⁺ conversion. In this work, BaBPO₅ doped with the samarium ion was prepared by high temperature solid-state reaction. Sm²⁺ ions were obtained by two different reduction methods, i.e., heating in H₂ reduced atmosphere and X-ray irradiation. The measurements of X-ray diffraction (XRD), and scanning electron microscope (SEM) were investigated. It is found that the conversion of Sm³⁺→Sm²⁺ is very efficient in BaBPO₅ hosts after X-ray irradiation. Sm²⁺ ions under these two reduction methods exhibit different characteristics that were studied by measurements of luminescence and decay. The results showed that the luminescence properties of Sm²⁺ ions in BaBPO₅ were highly dependent on the sample preparation conditions.     

Codes Over the p-adic Integers

We study codes over the p-adic integers and correct errors in the existing literature. We show that MDS codes exist over the p-adics for all lengths, ranks and p. We show that self-dual codes exist over the 2-adics if and only if the length is a multiple of 8 and that self-dual codes exist over the p-adics with p odd if and only if the length is 0 (mod 4) for p ≡ 3 (mod 4) and 0 (mod 2) for p ≡ 1 (mod 4).