冗余磁盘阵列的故障容错分析

本文在介绍冗余磁盘阵列(RAID)的故障容错机理之后,着重研究了设备故障对RAID系统可靠性的影响.其平均持续正常工作时间和系统在线修复设备故障容许的平均间隔时间的计算结果表明,只要在一定的容许时间内替换或修复故障磁盘,系统可保持持续正常工作状态.     

AlGaAs／GaAs HBT表面效应的二维数值分析

采用表面效应集总模型综合考虑表面费米能级钉扎和表面复合效应，对ＡｌＧａＡｓ／ＧａＡｓＨＢＴ表面效应的影响进行了二维数值模拟。结果表明，表面态的存在对集电极电流几乎不产生影响，但显著增加基极电流，使得电流增益明显下降。同时还发现在台面结构ＡＩＧａＡｓ／ＧａＡｓＨＢＴ中外基区表面复合的集边效应，即外基区表面复合主要发生在发射极台面与外基区的交界处附近，与外基区长度基本无关。模拟还表明基区缓变结构可以减少表面复合，提高电流增益。     

用拓扑指数S_i研究碳氢化合物的沸点(Ⅲ)

定义了拓扑指数Ｓｉ（ｉ＝１，２，３，４），并选取包含双、三键、环及苯环的碳氢化合物为研究对象，计算了这些化合物的拓扑指数Ｓｉ，同时用Ｓｉ相关了它们的沸点．结果较文献值有所改善．并从Ｓｉ中筛选出了Ｓ     

集合环

本文用集环来表现模糊集，得到了表现定理的新形式，并证明了这种表现可以有限化，即用有限个经典集近似刻划模糊集并且这样的刻划是同态的。最后，证明了集对方法是集环表现的特殊情形。     

MOS结构准静态测试中的异常C—V曲线

本文报导了MOS结构在准静态测试中的异常电容-电压曲线。讨论了它们产生的原因。     

PVInSb红外探测器的阻抗——频率特性分析

通过理论计算和实际测试，给出了ＰＶＩｎＳｂ红外探测器的低频阻抗－频率特性曲线，结合检测阻抗／动态电阻的方法和阻抗－频率特性曲线的变化规律，分析讨论了ＰＶＩｎＳｂ红外探测器的阻抗与动态电阻的异同，从而说明在涉及ＰＶＩｎＳｂ红外探测器的阻抗／动态电阻时，即使在低频范围也要具体考虑频率因素的影响。     

GS-221高速摄影测量仪测角信息的采集与处理

在GS-221高速摄影测量仪中,测角信息采集与处理速度的快慢是重要性能指标之一。本文讨论了如何在尽可能短的时间内对测角信息进行采集和处理的软件实现方法。     

Traffic analysis of heterogeneous mobile cellular networks using “wrap-up” cell structure

In this paper, we develop a tool for evaluating performance of a heterogeneous mobile network under different traffic conditions. The traffic condition is specified in a cluster of seven heterogeneous base stations, and “wrap-up” cell structure is applied to account for the traffic that crosses the boundary of the cluster. The performance of the network is specified in metrics which can be computed using the algorithm developed. These metrics relate to call rejection, i.e. the blocking of new calls, and the termination of handoff calls, as well as the carried traffic i.e. the expected number of ongoing calls in a station. These metrics are either measured for a single base station in a cluster, or measured for the average over the whole cluster. We apply the algorithm to some hypothetical data and present the numerical results. We also consider approximating a heterogeneous model with a simpler homogeneous model. Through some numerical results, we demonstrate the magnitude of errors that could result in the approximation.     

Simple autocorrelation technique based on degree-of-polarization measurement

We demonstrate a simple optical-fiber-based autocorrelator for picosecond short pulses based on degree-of-polarization measurement while tuning the relative delay of the two orthogonal polarization states of the pulse. The pulsewidths of 20-, 40-, and 80-GHz pulse trains and 2-ps pulses generated by a mode-locked laser are measured. The <-10-dBm optical powers are used in the experiment. The measurement results agree well with the measurements using conventional techniques. Compared with conventional autocorrelators, this technique has the advantages of 1) wavelength independent, 2) significant less alignment, and 3) no high power required.     

Hydroxyapatite coating on porous silicon substrate obtained by precipitation process

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HAP) is known as a bioactive and biocompatible material, HAP coatings were used to improve the biocompatible of substrate by many researcher, In this work, HAP thin films on porous silicon (PS) substrates have been prepared by aqueous precipitation method with rapid thermal annealing (RTA) processes. The HAP films had been prepared under the annealing temperature ranging from 300 to 1000 °C. By the measurement of X-ray diffraction (XRD), it was found that for the crystallinity optimization, the heat-treatment at 850–950 °C for 1 h would be favorable. Atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements reveal a dense and smooth surface of the HAP film, and tightly adherence of the coating on porous silicon substrate after sintered. Thus, by this method, porous silicon could be increased its bioactivity and so that could be used in the biomedical area.