Tellurium-implanted N+ layers in GaAs

Ion implantation of Te was investigated as a doping process for the fabrication of submicron n-type layers in GaAs. The implantation was performed with substrates held at 350°C. After implantation, a protective overcoat of AIN or Si₃N₄ was sputtered on the samples to prevent the GaAs from disassociating during anneal (900°C). The electrical characteristics of the n-type implants were then measured. Current-voltage and capacitance-voltage characteristics of implanted diodes indicated that the junctions were linearly graded and that there was no intrinsic layer present after anneal. Sheet resistivity and Hall effect measurements were used to determine the surface carrier concentration and effective mobility in the implanted layers. Ionized impurity profiles extending beyond the implanted junction depth were calculated by matching differential Hall effect data with junction capacitance-voltage data. A peak electron concentration of 7 × 10¹⁸ electrons/cm³ was observed. However, the profiles exhibited penetrating tails that resulted in junction depths being much deeper than the LSS range theory would predict.     

High-power, 4 W pulsed, grating-coupled surface-emitting laser

AlGaAs surface-emitting lasers fabricated with second-order grating, distributed Bragg reflector regions for output coupling and feedback are demonstrated to operate at high output powers. Powers of 1.75 and 4 W pulsed are reported for single gain section and three gain section lasers.<>     

The effects of the human body on UWB signal propagation in an indoor environment

Ultra-wideband (UWB) communication systems are investigated for their ability to operate in dense multipath environments. While a great deal of time and effort has been spent characterizing both the indoor and outdoor UWB channels, the effects of human body interaction with a close proximity UWB antenna remains unexplored. Measurements of a commercially available UWB antenna performance in an anechoic chamber and in various indoor multipath environments were conducted. Comparisons of these measurement results indicate that while the human body creates a deep (23.6 dB) in a light multipath environment, this is drastically reduced (6.8 dB) in a dense multipath environment.     

Continuous wave laser ablation of tissue: analysis of thermal andmechanical events

Porcine aortae, collagen fibers, and polyacrylamide control samples were subjected to argon laser irradiation while infrared and high-speed video cameras were used to monitor their surfaces. Subsequent analysis of simultaneous changes in surface temperature and physical features correlated thermal and mechanical events. Video images recorded prior to ablation onset of tissue slabs clearly revealed two distinct phases: (1) progressive growth of a surface dehydration zone, and (2) surface deformation, implying subsurface bubble formation. Surface temperature recordings and video imaging revealed that the onset of CW ablation of soft biological media often initiated with a violent explosion, surface tearing, and tissue ejection. Histological inspection revealed intense coagulation in superficial layers near the irradiation site, whereas chiefly mechanical disruption was noted at the base of the crater. Ablation characteristics were consistent with theoretical calculations. The influence of mechanical properties of target media on ablation was observed     

Development of a sodium-pump/neo-lasant photopumped soft X-raylaser

An intense source of sodium pump-line radiation has been created and used to photopump a neon plasma for application to a pulsed-power driven sodium/neo X-ray laser. Properties of the sodium-pump plasma and the neon-lasant plasma required to optimize fluorescence and lasing are determined. The implosion of a sodium-bearing plasma with a megampere pulsed-power driver (Gamble II) is used to produce a linear Z-pinch with up to 25 GW of sodium-pump-line radiation. A separate neon plasma, driven by part of the return current from the imploding sodium plasma, is created parallel to the sodium line source at a distance of 5 cm. Evidence for population inversion is indicated by fluorescence enhancement of the 11-Å resonance line from the n =4 level of neon when pumped by sodium     

Pulsed holmium laser ablation of tissue phantoms: correlation between bubble formation and acoustic transients

5 Pa served as tissue phantoms to evaluate such effects. Holmium laser pulses (wavelength: 2.12 μm, duration: 180 μs FWHM), were delivered through 400 and 600 μm diameter optical fibers inserted into cubes of clear gel. Bubble effects were investigated using simultaneous flash micro-videography and pressure recording for radiant exposures of 20–382 J/cm². Bubble formation and bubble collapse induced pressure transients were observed regardless of phantom stiffness. Bubbles of up to 4.2 mm in length were observed in gels with a Young’s modulus of 2.9×10⁵ Pa at a pulse energy of 650 mJ. An increase of Young’s modulus (reduction in water content) led to a monotonic reduction of bubble size. In the softest gels, bubble dimensions exceeded those observed in water. Pressure amplitudes at 3 mm decreased from 100±14 bars to 17±6 bars with increasing Young’s modulus over the studied range. Theoretical analysis suggested a major influence on bubble dynamics of the mass and energy transfer through the bubble boundary. Received: 26 August 1996/Revised version: 10 February 1997