Effect of nanocrystalline cellulose on the curing characteristics and aging resistance properties of carbon black reinforced natural rubber

This work focused on the effect of nanocrystalline cellulose (NCC) on the curing characteristics, aging resistance and thermal stability of natural rubber (NR) reinforced with carbon black (CB). Sharing the same fillers loading of 45 parts per hundred rubber (phr), NR/NCC/CB composites with different NCC/CB ratios (i.e. 0/45, 5/40, 10/35, 15/30, 20/25 phr) were prepared and analyzed. Resorcinol and hexamethylene tetramine (RH), acting as the modifier in NR/NCC interface, was also discussed for its influence. The result showed that an relatively higher ratio of NCC/CB led to a lower torque, a shorter cure time (T ₉₀), a slightly longer scorch time (T ₁₀) and a bigger vulcanization rate constant (K). This tendency suggested that the existence of NCC accelerated the vulcanization process. Additionally, modified by RH, NR/NCC/CB compounds exhibited a short T ₁₀ and a elevated torque. And a moderate RH content would lower the E _a of vulcanization. A 10 phr substitute of CB by NCC can help to improve aging resistance in terms of mechanical properties. In a high temperature aging condition, composites with 10 phr NCC also performed the highest storage modulus (G′) among composites tested. A moderate NCC content contributed to the best retention of G′ after high temperature aging, so did the incorporation of RH. With the partial replacement of CB by NCC, the temperature of 5% weight-lose had a slight drop and the apparent crosslink density showed a decrease. Thanks to the interaction of RH with both NR and NCC, composites showed an improvement in apparent crosslink density after modified by RH.     

Bistable stochastic biochemical networks: highly specific systems with few chemicals

In this paper we describe a class of stochastic biochemical systems exhibiting bistable behavior, in the sense that the invariant measure associated to the system is concentrated near two different classes of states of the system. We develop methods that allow us to describe the behavior of the invariant measure in some suitable asymptotic limits, as well as the switching times for the transitions between the states close to each of the states with high probability. Due to the discrete character of the problem, switching times cannot be computed using the classical Kramers’ formula, and alternative methods are required.     

Synthesis and characterisation of photopolymerisable liquid crystals based on the π-extended fluorene core and their corresponding non-reactive analogues

We have synthesised a series of new reactive mesogens with photopolymerisable di-acrylates and their corresponding non-reactive analogues based on the π-conjugated aromatic core, fluorene (F)-di-[thiophene (T)-benzene (B)], using the Stille and Suzuki coupling reaction. The effect of lateral alkyl chains on the 9-position of the central fluorene moiety as well as α, ω- side alkyl chains attached to the π-conjugated aromatic core on the mesomorphism was investigated by utilising differential scanning calorimetry (DSC) and polarising optical microscopy (POM). A wide angle X-ray scattering (WAXS) study at the various temperatures was also carried out to reveal phase structures. Photopolymerisable di-acrylates connected directly to the rigid aromatic core showed higher phase transition temperatures, probably due to the induced dipole moment in comparison with those of a non-reactive methyl–ether counterpart.     

Short time deposition of TiO2 nanoparticles on SiC as photocatalysts for the degradation of organic dyes

The deposition of TiO₂ nanoparticles on SiC was carried out by mechanical milling under different conditions. SiC–TiO₂ samples were used as photocatalysts for the degradation of organic dyes such as methylene blue and rhodamine B. A short time deposition of TiO₂ nanoparticles was observed during mechanical milling (2 min at 200 rpm) to cover the SiC particles. The presence of SiC and TiO₂ (anatase and rutile) was confirmed by means of X-ray diffraction after thermal treatment at 450 °C. The deposition of TiO₂ on SiC was corroborated by scanning electron microscopy analysis; the thickness of the thin layer of TiO₂ deposited on SiC increases as the proportion of TiO₂ increases. The energy band gap values obtained for these compounds were around 3.0 eV. SiC–TiO₂ photocatalysts prepared by mechanical milling exhibited better activity under UV-light irradiation for the degradation of methylene blue and rhodamine B than commercial TiO₂ powder (titania P25).     

Production from ilmenite of TiO2-supported catalysts for selective catalytic reduction of NO with NH3

Economic production of titanium dioxide (yield >98 %) from ilmenite has been achieved by use of a modified sulfate reduction process. A series of samples were prepared by varying the concentration of titanium dioxide nuclei (0.2, 0.3, and 0.6 %) and further impregnation with antimony and vanadia. The structural and acidic properties of the samples were comprehensively studied by X-ray diffraction (XRD), transmission electron microscopy, BJH pore size distribution, and temperature-programmed desorption of NH₃. The XRD results revealed the presence of intense peaks from anatase titanium dioxide. Enhancement of surface area was observed for second-time filtered samples, possibly because of loss of iron from the bulk. As a result, formation of additional micropores was apparent from N₂ adsorption and desorption isotherms. Among all the antimony and vanadia-doped samples, the first-time filtered sample with the low concentration of nuclei (0.2 %) had the highest catalytic activity at low temperatures, owing to its larger pore size and abundant acidic species.     

Existence of global weak solutions for Navier‐Stokes‐Poisson equations with quantum effect and convergence to incompressible Navier‐Stokes equations

In this paper, we consider a three dimensional quantum Navier‐Stokes‐Poisson equations. Existence of global weak solutions is obtained, and convergence toward the classical solution of the incompressible Navier‐Stokes equation is rigorously proven for well prepared initial data. Furthermore, the associated convergence rates are also obtained. Copyright © 2014 John Wiley & Sons, Ltd.     

Survey study and experimental investigation on the local behavior of pedestrian groups

Current research on pedestrian dynamics mainly focuses on the interactions among isolated individuals, the impact of the presence of groups is not fully considered. In recent 5 years, researchers have started to investigate pedestrian group movement. The aim of this work is to explore the local behavior of pedestrian groups by questionnaires and field observation. Survey study focused on pedestrians' psychology when walking in groups, which included five parts: group size, interpersonal distance, spatial relationship among group members, speed adjustment of group members, information transmission, and acid action among group members. Meantime a field observation was carried out to study group movement characteristics, which contained speed, step frequency, offset angle and interpersonal distance. The survey results show that group members have a closer interpersonal distance, faster information transmission and plenty of acid action. Conversely, group walking has a negative influence on pedestrian's speed, step frequency by comparing with the way isolated pedestrian walks. In addition, it is found that for a certain group, the group members are able to keep movement consistent. Also there exists obvious movement diversity among different group types (male dyads, female dyads, couple groups, and ordinary‐friend groups) because of different gender and social relationship. Ultimately the results will be more promising for helping to model the movement of pedestrian groups. © 2014 Wiley Periodicals, Inc. Complexity 20: 87–97, 2015     

Dynamic output feedback consensus of continuous‐time networked multiagent systems

This article addresses the dynamic output feedback consensus problem of continuous‐time networked multiagent systems. Both a fixed topology and Markovian switching topologies are considered. The consensus algorithms are on the base of the output information of each agent's itself and its neighbors. Some sufficient conditions for consensus of multiagent systems are obtained in forms of bilinear matrix inequalities. The algorithm based on the homotopy continuation method is given to compute the feasible controller gains. Numerical simulations are given to show the effectiveness of the proposed results. © 2014 Wiley Periodicals, Inc. Complexity 20: 35–42, 2015     

Chemoenzymatic synthesis of β-carboline derivatives using McbA,a new ATP-dependent amide synthetase

McbA was characterized in vitro as a novel amide synthetase in the marinacarbolines A–D biosynthetic pathway, catalyzing amide bond formation between 1-acetyl-3-carboxy-β-carboline (1a) and substituted-β-phenethylamines (1b, 2b, 3b) and tryptamine (4b) in an ATP-dependent manner. Enzyme kinetic analyses highlight β-phenethylamine as the most suitable amine donor. McbA showed broad substrate compatibility with substituted amines; 10 new β-carboline analogues were chemoenzymatically generated.     

Preparation of 2,2-difluoro-1-trialkylsilylethenylstannanes and their cross-coupling reactions

Reaction of 2 with bis(tributyltin) in the presence of 3 mol % Pd₂(dba)₃, 6 mol % XPhos, and 30 equiv of LiBr in wet and air bubbled THF at reflux for 8 h afforded the desired products 3 in 73–74% yields. The cross-coupling reaction of 3a with aryl iodides in the presence of 10 mol % Pd(PPh₃)₄ and 10 mol % CuI afforded the coupled products 4a–p in 47–90% yields. The coupling reaction of 3b with various alkynyl bromides having aryl-, alkyl, or trialkylsilyl group also afforded the corresponding 1,3-enynes 5a–g in 61–77% yields.