钢铁表面锌系磷化膜的研究

本文采用ＳＥＭ和ＴＥＭ等测试手段，研究了四功能处理液不同条件下在钢铁表面上形成锌系磷化膜的形貌，晶体结构；采用ＥＤＳ研究了磷化膜的化学成发，通过实验确定了Ｚｎ／Ｐ值在２．１２～３．２０时，磷化膜具有良好的耐蚀性。     

网络新闻及其使用

本文介绍了Ｉｎｔｅｒｎｅｔ中网络新闻及其订阅，检查，阅读，消息文件的删除，发送新闻，新闻组的建议以及使用中应注意的事项。     

Morphological effect on spectral property of poly(9,9-dihexylfluorene-alt-2,5-dihexyloxybenzene) films

In this study the optical property and film morphology of a conjugated polymer, poly(9,9-dihexylfluorene-alt-2,5-dihexyloxybenzene) (PF6OC6), are investigated. It is found that the intensity of the 0-1 emission relative to the 0-0 emission in the PL spectra and the full width at the half-maximum (fwhm) of PL spectra of the PF6OC6 films decrease firstly and then increase with increasing the annealing temperature. The polymer films also exhibit different morphological features after annealing at different temperatures. The optical and morphological results suggest that the vibronic structure of PF6OC6 is closely related to the film morphology, and its formation is enhanced in the amorphous (or less ordered) films and inhibited in the ordered films.     

排序集抽样下Inverse Rayleigh分布的Fisher信息量及其在参数估计中的应用

文章分别在简单随机抽样和排序集抽样下研究了Inverse Rayleigh分布中对应样本所含刻度参数θ的Fisher信息量.数值结果表示,同等样本容量的排序集样本比简单随机样本提供更多关于θ的信息.接着分别基于简单随机样本和排序集样本构造了θ的一些优良估计,并对估计结果进行了数值比较.     

On the Sixth Power Mean of the Two-term Exponential Sums

Acta Mathematica Sinica, English Series - The main purpose of this article is to study the calculating problem of the sixth power mean of the two-term exponential sums, and give an interesting...     

Regularity of Viscosity Solutions of the Biased Infinity Laplacian Equation

In this paper, we are interested in the regularity estimates of the nonnegative viscosity super solution of the $β$−biased infinity Laplacian equation $$∆^β_∞u = 0,$$ where $β ∈ \mathbb{R}$ is a fixed constant and $∆^β_∞u := ∆^N_∞u + β|Du|,$ which arises from the random game named biased tug-of-war. By studying directly the $β$−biased infinity Laplacian equation, we construct the appropriate exponential cones as barrier functions to establish a key estimate. Based on this estimate, we obtain the Harnack inequality, Hopf boundary point lemma, Lipschitz estimate and the Liouville property etc.     

Sufficient Utilization of Mn2+/Mn3+/Mn4+ Redox in NASICON Phosphate Cathodes towards High-Energy Na-Ions Batteries

Na superionic conductor of Na₃MnTi(PO₄)₃ only containing high earth-abundance elements is regarded as one of the most promising cathodes for the applicable Na-ion batteries due to its desirable cycling stability and high safety. However, the voltage hysteresis caused by Mn²⁺ ions resided in Na⁺ vacancies has led to significant capacity loss associated with Mn reaction centers between 2.5–4.2 V. Herein, the sodium excess strategy based on charge compensation is applied to suppress the undesirable voltage hysteresis, thereby achieving sufficient utilization of the Mn²⁺/Mn³⁺ and Mn³⁺/Mn⁴⁺ redox couples. These findings indicate that the sodium excess Na_3.5MnTi_0.5Ti_0.5(PO₄)₃ cathode with Ti⁴⁺ reduction has a lowest Mn²⁺ occupation on the Na⁺ vacancies in its initial composition, which can improve the kinetics properties, finally contributing to a suppressed voltage hysteresis. Based on these findings, it is further applied the sodium excess route on a Mn-richer phosphate cathode, which enables the suppressed voltage hysteresis and more reversible capacity. Consequently, this developed Na_3.6Mn_1.15Ti_0.85(PO₄)₃ cathode achieved a high energy density over 380 Wh kg⁻¹ (based on active substance mass of cathode) in full-cell configurations, which is not only superior to most of the phosphate cathodes, but also delivers more application potential than the typical oxides cathodes for Na-ion batteries.     

Polyether-b-Amide Based Solid Electrolytes with Well-Adhered Interface and Fast Kinetics for Ultralow Temperature Solid-State Lithium Metal Batteries

Solid-state lithium metal batteries (SSLMBs) are highly desirable for energy storage because of the urgent need for higher energy density and safer batteries. However, it remains a critical challenge for stable cycling of SSLMBs at low temperature. Here, a highly viscoelastic polyether-b-amide (PEO-b-PA) based composite solid-state electrolyte is proposed through a one-pot melt processing without solvent to address this key process. By adjusting the molar ratio of PEO-b-PA to lithium bis(trifluoromethanesulphonyl)imide (ethylene oxide:Li = 6:1) and adding 20 wt.% succinonitrile, fast Li⁺ transport channel is conducted within the homogeneous polymer electrolyte, which enables its application at ultra-low temperature (−20 to 25 °C). The composite solid-state electrolyte utilizes dynamic hydrogen-bonding domains and ion-conducting domains to achieve a low interfacial charge transfer resistance (<600 Ω) at −20 °C and high ionic conductivity (25 °C, 3.7 × 10⁻⁴ S cm⁻¹). As a result, the LiFePO₄|Li battery based on composite electrolyte exhibits outstanding electrochemical performance with 81.5% capacity retention after 1200 cycles at −20 °C and high discharge specific capacities of 141.1 mAh g⁻¹ with high loading (16.1 mg cm⁻²) at 25 °C. Moreover, the solid-state SNCM811|Li cell achieves excellent safety performance under nail penetration test, showing great promise for practical application.