Synthesis and application of cinnamate-functionalized rubber for the preparation of UV-curable films

A butyl rubber derivative that can be cured upon exposure to UV light in the absence of additional chemical additives was developed. This polymer was prepared by the reaction of hydroxyl-functionalized butyl rubber with cinnamoyl chloride to provide a cinnamate functionalized rubber. The cinnamate content was varied by starting with derivatives prepared from butyl rubber containing either 2 or 7 mol% isoprene. The kinetics of the cross-linking was studied by UV–visible spectroscopy and it was found to vary according to the film thickness. The changes in gel content and volume swelling ratio with irradiation time were dependent on the cinnamate content. Toxicity studies suggested that the cross-linked materials do not leach toxic molecules. The approach was also applied to obtain cross-linked films of butyl rubber-poly(ethylene oxide) graft copolymers, leading to surfaces that resisted the adhesion and growth of cells. Thus the approach is versatile and is of particular interest when non-leaching coatings of cross-linked butyl rubber are desired for biomedical or other applications.     

The preparation and properties of bulk-heterojunction organic solar cells with indole-containing fulleropyrrolidine derivatives as acceptors

Two indole-containing fullerene derivatives, N-hydrogen-2-[3-(N-2-ethylhexylindolyl)][60]fulleropyrrolidine (EHIHC60P), and N-(2-ethylhexylindolyl))-2-[3-(N-2-ethylhexylindolyl)][60]fulleropyrrolidine (DEHIC60P) were synthesized by the typical Prato reaction. The absorption spectra, electrochemical properties of the two compounds were measured. Inverted solar cells were fabricated with the structure of ITO/ZnO/poly(3-hexylthiophene) (P3HT):fullerene derivatives/MoO₃/Ag. The highest power conversion efficiencies (PCEs) of 3.32% and 3.23% were obtained for P3HT/EHIHC60P and P3HT/DEHIC60P based solar cells at the composite ratio of 1:1 after the active layers were annealed at 150 °C under inert atmosphere, with a open-circuit voltage (V_oc) of 0.66 V and 0.74 V, respectively. For comparison, the device based on P3HT/PCBM at the same conditions showed the PCE of 3.28%, with a V_oc of 0.61 V. The influence on the photovoltaic property of the fullerene derivatives, which was induced by some subtle changes in the chemical structure was compared and discussed.     

A new organic far-red mechanofluorochromic compound derived from cyano-substituted diarylethene

A new cyano-substituted diarylethene derivative (R-NH₂) with reversible far-red mechanofluorochromic property was synthesized and confirmed by standard spectroscopic methods. To the best of our knowledge, the 684 nm red-shifted wavelength of the ground R-NH₂ is the longest wavelength that has appeared in the literature. The mechanofluorochromic mechanism was investigated by small and wide-angle X-ray scattering and was ascribed to the destruction of crystalline structure. More in-depth study by infrared spectra and time-resolved emission-decay behaviors showed that the changes of C–H out-of-plane bending vibrations in aryl group of the compound and the obvious increase of fluorescence lifetime might be the fundamental reasons. The synthetic strategy reported here can be extended to prepare more and more long-wavelength emission mechanofluorochromic materials, which can broaden the scope of application of such materials and for thoroughly understanding the mechanofluorochromic mechanism.     

Ultrasensitive electrochemical immunosensor for zeranol detection based on signal amplification strategy of nanoporous gold films and nano-montmorillonite as labels

Nano-montmorillonites belong to aluminosilicate clay minerals with innocuity, high specific surface area, ion exchange, and favorable adsorption property. Due to the excellent properties, montmorillonites can be used as labels for the electrochemical immunosensors. In this study, nano-montmorillonites were converted to sodium montmorillonites (Na-Mont) and further utilized for the immobilization of thionine (TH), horseradish peroxidase (HRP) and the secondary anti-zeranol antibody (Ab₂). The modified particles, Na-Mont-TH-HRP-Ab₂ were used as labels for immunosensors to detect zeranol. This protocol was used to prepare the immunosensor with the primary antibody (Ab₁) immobilized onto the nanoporous gold films (NPG) modified glassy carbon electrode (GCE) surface. Within zeranol concentration range (0.01–12 ng mL⁻¹), a linear calibration plot (Y = 0.4326 + 8.713 X, r = 0.9996) was obtained with a detection limit of 3 pg mL⁻¹ under optimal conditions. The proposed immunosensor showed good reproducibility, selectivity, and stability. This new type of immunosensors with montmorillonites and NPG as labels may provide potential applications for the detection of zeranol.     

Enhancement of sensitivity of paper-based sensor array for the identification of heavy-metal ions

Paper-based microfluidic devices have been widely investigated in recent years. Among various detection techniques, colorimetric method plays a very important role in paper-based microfluidic devices. The limitation, however, is also clear: they generally require highly sensitive indicators. In this work, we have developed a novel enrichment-based paper test for the discrimination of heavy-metal ions. Comparing to regular paper-based microfluidic devices, enrichment-based technique showed largely improved sensitivity. Combining with eight pyridylazo compounds and array technologies-based pattern-recognition, we have obtained the discrimination capability of eight different heavy-metal ions at same concentration as low as 50 μM using our enrichment-based pyridylazo compounds array paper. Identification of the heavy-metal ions was readily achieved using a standard chemometric approach. This method can be, of course, used for other analytes as well.     

Development of a sensitive and reliable high performance liquid chromatography method with fluorescence detection for high-throughput analysis of multi-class mycotoxins in Coix seed

As an edible and medicinal plant, Coix seed is readily contaminated by more than one group of mycotoxins resulting in potential risk to human health. A reliable and sensitive method has been developed to determine seven mycotoxins (aflatoxins B₁, B₂, G₁, G₂, zearalenone, α-zearalenol, and β-zearalenol) simultaneously in 10 batches of Coix seed marketed in China. The method is based on a rapid ultrasound-assisted solid–liquid extraction (USLE) using methanol/water (80/20) followed by immunoaffinity column (IAC) clean-up, on-line photochemical derivatization (PCD), and high performance liquid chromatography coupled with fluorescence detection (HPLC-FLD). Careful optimization of extraction, clean-up, separation and detection conditions was accomplished to increase sample throughput and to attain rapid separation and sensitive detection. Method validation was performed by analyzing samples spiked at three different concentrations for the seven mycotoxins. Recoveries were from 73.5% to 107.3%, with relative standard deviations (RSDs) lower than 7.7%. The intra- and inter-day precisions, expressed as RSDs, were lower than 4% for all studied analytes. Limits of detection and quantification ranged from 0.01 to 50.2 μg kg⁻¹, and from 0.04 to 125.5 μg kg⁻¹, respectively, which were below the tolerance levels for mycotoxins set by the European Union. Samples that tested positive were further analyzed by HPLC tandem electrospray ionization mass spectrometry for confirmatory purposes. This is the first application of USLE-IAC-HPLC-PCD-FLD for detecting the occurrence of multi-class mycotoxins in Coix seed.     

1,3-二(4-吡啶)丙烷-Cd(II)手性配合物的合成与晶体结构

利用室温挥发方法合成了手性化合物[Cd(bbp)2(H2O)2]·bbp·2NO3·H2O(bpp=1,3-二(4-吡啶基)丙烷);利用X射线单晶衍射分析了产物的分子结构,并测定了其荧光光谱和固体圆二色光谱.结果表明,合成产物具有含一维手性链[Cd(bbp)2(H2O)2]n的手性超分子结构;其在室温下表现出中等强度的倍频效应,其二阶非线性极化率为尿素的0.4倍,是潜在的二阶非线性光学材料.此外,合成的手性化合物呈现弱的荧光,其固体圆二色光谱则呈现正的Cotton效应.