粉末化学镀法制备的NiB／TiO2非晶态合金催化剂对环丁烯砜加氢反应的催化性能

 采用诱导沉积法及粉末化学镀法分别制备了纯态NiB及负载型NiB／TiO2非晶态合金催化剂．用XRD，ICP，SEM，TEM和DSC等手段对催化剂的物性及TiO2载体与NiB非晶态合金之间的相互作用进行了表征，考察了非晶态合金的结构、组成、形貌和热稳定性，并将其用于环丁烯砜加氢反应中．结果表明，相对于NiB而言，NiB／TiO2催化剂具有优良的热稳定性和催化活性，这缘于NiB和TiO2载体之间的相互作用及载体的分散作用．     

亚磺化脱卤试剂在有机合成中的应用

本文综述了亚磺化脱卤试剂在有机合成中的应用。特别是氟烷基化反应中的应用。     

The structure of PR toxin,a mycotoxin from Penicillium roqueforti

An earlier report from our laboratories described the isolation, partial characterization, and biological activity of a new mycotoxin from cultures of Penicillium roqueforti, and the name “PR toxin” was tentatively assigned to the compound. On the basis of further chemical and spectral evidence we propose that PR toxin has the structure shown in formula 1.¹     

Preparation of a sulfonated fused-silica capillary and its application in capillary electrophoresis and electrochromatography

In the present paper, two new methods, sol-gel and chemical bonding methods, were proposed for preparation of sulfonated fused-silica capillaries. In the sol-gel method, a fused-silica capillary was coated with the sol solution obtained by hydrolysis of 3-mercaptopropyltrimethoxysilane (MPTS) and tetramethoxysilane, and followed by age; while in the chemical bonding method, a capillary was chemically bonded directly with MPTS. Then, both the resulting capillaries were oxidized with an aqueous solution of hydrogen peroxide solution (H2O2) (30%, m/m) to obtain the sulfonated capillaries. The electroosmotic flow (EOF) for the sulfonated capillaries was found to remain almost constant within the studied pH range, and greater than that of the uncoated capillary. However, the coating efficiency of the capillary prepared by chemical bonding method was higher than that by sol-gel method, by comparing their magnitude of the EOF, the degree of disguise of the silanol and reproducibility of preparation procedure. The effects of the electrolyte's concentration and the content of methanol (MeOH) on the EOF were also studied. Especially, the study of the apparent pH (pH*) on the EOF in a water-MeOH system was reported. Finally, capillary electrophoretic separation of seven organic acids was achieved within 6.5 min under optimal condition using the chemically bonded sulfonated capillary. Moreover, separation of four alkaloids on the sulfonated capillary was compared with that on uncoated capillary in different conditions. Ion-exchange mechanism was found to play a key role for separation of these four basic analytes on the sulfonated capillary.     

掺杂表面活性剂及金属离子对纳米Y2O3:Eu3+粉体的发光性能的影响

采用草酸沉淀法,通过填加表面活性剂四丁基溴化铵、十六烷基三甲基溴化铵和金属离子K+,Mg2+,Ba2+,制备出稀土发光材料Y2O3Eu3+,利用XRD与激发和发射光谱等测试手段对样品的结构与光学性能进行了表征,考察了同时加入不同表面活性剂和金属离子对Y2O3Eu3+的结构和发光性质的影响.结果表明加入表面活性剂和金属离子对发光材料Y2O3Eu3+的发光性能有较大的影响,其中以同时加入四丁基溴化铵和Ba2+以及加入十六烷基三甲基溴化铵和Mg2+对Y2O3Eu3+粉体的发光性能影响最大.     

A study of thoria on the surface of gamma-Al2O3

The dispersion of thoria on the surface of gamma-Al2O3 and the surface properties of ThO2/gamma-Al2O3 samples, as well as the influence of the loading amount of thoria on the reduction behavior of copper oxide species, have been studied using XRD, XPS, FTIR, and TPR. The results indicate that the dispersion capacity of thoria, like that of ceria, is much lower than for two other tetravalent metal oxides, zirconia and titania, and the surface adsorption amount of the carbonyl compound and H2O slightly increases with increasing thoria loading. The different thoria loadings can influence the reduction behavior of the dispersed copper oxide by comparing the TPR results of CuO/ThO2/gamma-Al2O3 samples. In addition, the lower dispersion capacities of thoria and ceria on gamma-Al2O3 are tentatively discussed by considering the structural stability of the two oxides.     

Solution-phase preparation of a 560-compound library of individual pure mappicine analogues by fluorous mixture synthesis

Solution-phase mixture synthesis has efficiency advantages and favorable reaction kinetics. Applications of this technique, however, have been discouraged by the difficulty in obtaining individual, pure final products by using conventional separation and identification processes. Introduced here is a new strategy for mixture synthesis that addresses the separation and identification problems. Members of a series of organic substrates are paired with a series of fluorous tags of different chain lengths. The tagged starting materials are then mixed and taken through a multistep reaction process. Fluorous chromatography is used to demix the tagged product mixtures on the basis of the fluorine content of the tags to provide the individual pure components of the mixture, which are detagged to release the final products. The utility of fluorous mixture synthesis is demonstrated by the preparation of a 560-membered library of analogues of the natural product mappicine. A seven-component mixture is carried through a four-step mixture synthesis (two one-pot and two parallel steps) to incorporate two additional points of diversity onto the tetracyclic core. Methods for analysis and purification of the intermediates are established for the quality control of the mixture synthesis.     

Theoretical and experimental investigation of the effect of proton transfer on the (27)al MAS NMR line shapes of zeolite-adsorbate complexes: an independent measure of solid Acid strength

Assessing the degree of proton transfer from a Br?nsted acid site to one or more adsorbed bases is central to arguments regarding the strength of zeolites and other solid acids. In this regard certain solid-state NMR measurements have been fruitful; for example, some (13)C, (15)N, or (31)P resonances of adsorbed bases are sensitive to protonation, and the (1)H chemical shift of the Br?nsted site itself reflects hydrogen bonding. We modeled theoretically the structures of adsorption complexes of several bases on zeolite HZSM-5, calculated the quadrupole coupling constants (Q(cc)) and asymmetry parameters (eta) for aluminum in these complexes and then in turn simulated the central transitions of their (27)Al MAS NMR spectra. The theoretical line width decreased monotonically with the degree of proton transfer, reflecting structural relaxation around aluminum as the proton was transferred to a base. We verified this experimentally for a series of adsorbed bases by way of single-pulse MAS and triple quantum MQMAS (27)Al NMR. The combined theoretical and experimental approach described here provides a strategy by which (27)Al data can be applied to resolve disputed interpretations of proton transfer based on other evidence.     

A kinetic model for steric hindrance effects on quaternization of poly(vinylpyridines)

Quaternization reactions of poly(vinylpyridines) with alkyl halides show retardation in excess of that predicted by the classical second-order kinetics. Based on the classical collision and transition state theories, a kinetic model has been developed to quantify such retardation, in which the overall reaction rate is characterized by a rate constant k₀ of the intrinsic reactivity between a pyridyl group and an alkyl halide group, and by a steric hindrance effect parameter α. The latter accounts for the degree to which the rate of collisions of reactants is reduced, or to which the freedom of movement of the reactants in the transition state is restricted as the reaction proceeds. The resulting kinetic expression has been validated using experimental results reported in the literature and those of our own. The functional dependence of k₀ and α values on the nature of poly(vinylpyridines) and that of alkyl halides is explained. Other factors affecting k₀ and α, including changes in macromolecular dimensions and/or in the distribution of residue environment, quality of solvent, and reaction temperature, are discussed. © 1993 John Wiley & Sons, Inc.     

Syntheses, crystal structures and properties of novel zinc(II) complexes obtained by reactions of zinc(II) malonate with flexible multidentate ligands

Complex [Zn₂(bimb)₂(mal)₂(H₂O)₂]·4H₂O (1) (mal=⁻OCOCH₂COO⁻) was obtained by reaction of bidentate ligand 4,4′-bis(imidazole-1-ylmethyl)biphenyl (bimb) with zinc(II) salt of malonate, while the reaction of the same metal salt with 1,3,5-tris(imidazol-1-ylmethyl)-2,4,6-trimethylbenzene (titmb) gives another novel complex [Zn₂(titmb)₂(mal)][mal]·12H₂O (2). The structures of these complexes were determined by X-ray crystallography. The results revealed that 1 is a cyclic dinuclear complex in which the malonate groups act as terminators and prevent further aggregation, while 2 is a 2D honeycomb network in which each independent 2D sheet contains two sub-layers bridged by the malonate groups and complex 2 also contains free malonate as a counteranion connected to the 2D layer by C-H?O hydrogen bonds. The entirely different structure and topology of complexes 1 and 2, on the one hand, indicates that the nature of organic ligands affected the structures of assemblies greatly, and on the other, reveals the versatility of the malonate which can act as a bridging and/or blocking ligand.