Cesium lead halide perovskite nanocrystals for ultraviolet and blue light blocking

Using cesium lead halide perovskite nanocrystals, CsPb(Cl/Br)_3, as a light absorber, we report a highly effective UV and blue light blocking film. The CsPb(Cl/Br)_3 nanocrystals are well dispersed in the ethyl cellulose(EC) matrix to compose a UV and blue light shielding film, and the absorption edge of the film is tunable by adjusting Cl to Br ratio using anion exchange. The CsPbCl_2 Br-EC film exhibits a transmittance of 5% at 459 nm, 90% at 478 nm and 95% in the range of 500–800 nm, which makes it excellent for UV and blue light shielding. In addition, the as-prepared EC-CsPb(Cl/Br)_3 film shows excellent photostability under UV irradiation. Results demonstrate that this EC-CsPb(Cl/Br)_3 based materials with sharp absorbance edges, tunable blocking wavelength, and high photostability can be useful for the applications in UV and blue light blocking and optical filters     

12-钼磷酸中水的存在状态及其热稳定性的质谱法研究

本文运用程序升温脱水-质谱计检测(TPD MS)和红外光谱测定(IR)法研究了12-钼磷酸(PMA)中水的存在状态及其热稳定性. 解迭了PMA的TPD MS谱, 发现PMA中存在有结合能量各异的7种水峰. 讨论了PMA中各种水的结合强度及其对Keggin结构稳定性的影响。     

微量吸附量热技术在NH2-SBA-15合成中的应用

采用共价接枝法, 以氨丙基-三乙氧基硅烷为氨源, 制备了一系列的NH2-SBA-15催化剂, 通过微量吸附量热技术定量地分析了该催化剂表面碱性中心的强度、数量和分布状态. 实验结果表明, SBA-15在 550 ℃焙烧6 h, 氨基硅源与SBA-15质量比为1.5, 是合成NH2-SBA-15催化剂最适宜的条件. 运用微量吸附量热技术实现了对NH2-SBA-15催化剂合成条件的优化.     

Oxidative aromatization of Hantzsch 1,4-dihydropyridines by aqueous hydrogen peroxide-acetic acid

A simple method for the oxidative aromatization of Hantzsch 1,4-dihydropyridines to the corresponding pyridines is achieved by using hydrogen peroxide as green oxidant and acetic acid as catalyst in aqueous solution.     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅧ. THE POLYMERIZATION KINETICS OF BENZONITRILE CATALYZED BY METAL ACETYLACETONATE

The bulk polymerization of benzonitrile catalyzed by Co(Ⅱ), Co(Ⅲ) and Fe(Ⅲ) acetylacetonate was studied. The results of kinetics study show that the rate of polymerization was proportional to first power of the concentration of catalyst and second power of the concentration of monomer.     

Preparation of polymer-supported phosphine from ferrocene for palladium-catalyzed Suzuki-Miyaura cross-coupling reactions

Polymer-supported phosphine ligand 3b derived from ferrocene was prepared,and applied in palladium-catalyzed Suzuki- Miyaura reactions.A range of aryl bromides can couple with phenylboronic acid to obtain corresponding biaryls in excellent yields. The recycling of the polymer-bound catalyst was tested without adding palladium.     

Over 18% binary organic solar cells enabled by isomerization of non-fullerene acceptors with alkylthiophene side chains

Side-chain engineering has been demonstrated as an effective method for fine-tuning the optical, electrical, and morphological properties of organic semiconductors toward efficient organic solar cells (OSCs). In this work, three isomeric non-fullerene small molecule acceptors (SMAs), named BTP-4F-T2C8, BTP-4F-T2EH and BTP-4F-T3EH, with linear and branched alkyl chains substituted on the α or β positions of thiophene as the side chains, were synthesized and systematically investigated. The results demonstrate that the size and substitution position of alkyl side chains can greatly affect the electronic properties, molecular packing as well as crystallinity of the SMAs. After blending with donor polymer D18-Cl, the prominent device performance of 18.25% was achieved by the BTP-4F-T3EH-based solar cells, which is higher than those of the BTP-4F-T2EH-based (17.41%) and BTP-4F-T2C8-based (15.92%) ones. The enhanced performance of the BTP-4F-T3EH-based devices is attributed to its stronger crystallinity, higher electron mobility, suppressed biomolecular recombination, and the appropriate intermolecular interaction with the donor polymer. This work reveals that the side chain isomerization strategy can be a practical way in tuning the molecular packing and blend morphology for improving the performance of organic solar cells.

     

铕敏化荧光法测定甲磺酸帕苏沙星

稀土Eu3+能与甲磺酸帕苏沙星形成络合物,并发出Eu3+的特征荧光.加入表面活性剂SDBS能大大增强体系的荧光强度,由此建立了表面活性剂敏化的Eu3+荧光探针测定甲磺酸帕苏沙星的方法.最佳测定条件为最大激发和发射波长分别是332和618 nm;pH=7.5;Eu3+浓度为1.2×10-5 mol/L,SDBS浓度为3.0×10-5 mol/L.甲磺酸帕苏沙星浓度在3.0×10-8～2.0×10-6 mol/L范围内与荧光强度线性关系良好,r=0.9993;检出限为1.0×10-9 mol/L.该方法用于甲磺酸帕苏沙星注射剂和人体血清以及尿样中的甲磺酸帕苏沙星的含量测定,结果令人满意.     

基于支持向量机的羰基化合物红外光谱研究

设计了一个4层分等级分类系统，通过支持向量机技术对羰基化合物的红外光谱成功地进行了信息分类和提取，并与人工神经网络进行比较，结果表明：支持向量机对羰基类化合物红外光谱分类效果优于人工神经网络；另外详细探讨了表征酰胺类化合物的特征光谱峰片段对识圳伯仲叔酰胺的影响，证明了酰胺的N-H伸缩振动峰对识别伯仲叔酰胺贡献最大，为构建红外光谱智能解析系统提供了定量依据。     

Synthesis and Structural Characterization of cis- and trans-bis(4,4′-dimethyl-2,2′-bipyridine)cadmium(II) Nitrates Prepared in a One-pot Reaction

The cis and trans isomers of [Cd(dmbpy)₂](NO₃)₂] (dmbpy = 4,4′-dimethyl-2,2′-bipyridine) have been synthesized simultaneously via a one-pot reaction of Cd(NO₃)₂ · 4H₂O with the dmbpy ligand in a MeOH/H₂O mixture; they can be obtained individually by means of the mechanical separation due to their different growing habit of the single-crystals. Different π-stacking interactions are observed in the cis and trans isomers forming different one-dimensional networks. The outcome of the DFT calculations agrees well with the experimental results.