Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.     

Intermetallic compounds formed at the interface between liquid indium and copper substrates

The interfacial reactions between liquid In and Cu substrates at temperatures ranging from 175°C to 400°C are investigated for the applications in bonding recycled sputtering targets to their backing plates. Experimental results show that a scallop-shaped Cu₁₆In₉ intermetallic compound is found at the Cu/In interface after solder reactions at temperatures above 300°C. A double-layer structure of intermetallic compounds containing scallop-shaped Cu₁₁In₉ and continuous CuIn is observed after the Cu/In interfacial reaction at temperatures below 300°C. The growth of all these intermetallic compounds follows the parabolic law, which implies that the growth is diffusion-controlled. The activation energies for the growth of Cu₁₆In₉, Cu₁₁In₉, and CuIn intermetallic compounds calculated from the Arrhenius plot of growth reaction constants are 59.5, 16.9, and 23.5 kJ/mole, respectively.     

飞秒激光烧蚀研究进展

介绍飞秒激光烧蚀材料的机理论模型，阐述飞秒激光烧蚀的特性，揭示飞秒激光烧蚀的广泛应用前景。     

GALILEO频率结构和信号设计的分析

描述并分析了由欧盟GALILEO信号特别工作组提出的GALILEO全球卫星导航定位系统的频率结构和信号设计。     

The orientation-selective growth of LaNiO3 films on Si(100) by pulsed laser deposition using a MgO buffer

Highly (100)-oriented, (110)-oriented and polycrystalline LaNiO₃ (LNO) films were successfully prepared on Si(100) using an oriented MgO film as a buffer. It was somewhat surprising to find that that the orientation relation between the LNO film and the corresponding MgO buffer was: LNO(100)\MgO(110), LNO(110)\MgO(111) and LNO(polycrystalline)\MgO(100). The crystalline quality of the LNO films was shown to be sensitive to the preparation conditions of the MgO buffer. The film surface was very smooth, without micrometer-sized droplets being observed. All LNO films were of metallic conductivity, with a room-temperature resistivities of approximately 250, 280 and 420 μΩ cm for the (110)-oriented, (100)-oriented and polycrystalline LNO, respectively. Received: 2 April 2001 / Accepted: 23 October 2001 / Published online: 3 June 2002     

Singularity conjecture and constructions of Jacobi forms

This paper verifies the singularity conjecture for Jacobi forms with higher degree in some typical cases, and gives constructions for the Jacobi cusp forms whose Fourier coefficients can be expressed by some kind of Rankin-typeL-series.     

Some degenerate and quasilinear parabolic systems not in divergence form

This paper deals with positive solutions of degenerate and quasilinear parabolic systems not in divergence form: u_t=u^p(Δu+av), v_t=v^q(Δv+bu), with null Dirichlet boundary conditions and positive initial conditions, where p, q, a and b are all positive constants. The local existence and uniqueness of classical solution are proved. Moreover, it will be proved that all solutions exist globally if and only if ab?λ₁², where λ₁ is the first eigenvalue of −Δ in Ω with homogeneous Dirichlet boundary condition.     

军训网远程教育平台的设计

当前，远程教育作为一种新型的教学模式，在世界各国受到普遍重视，得到了飞速发展，它是对传统教学模式的创新和发展，军训网远程教育的建设对提高军队教育质量，提高广大官兵文化素质具有重要的现实意义和实用价值。首先阐述了建设军训网远程教育平台的必要性，接着说明了远程教育的开展形式，然后介绍了军训网远程教育平台的功能。最后详细论述了该平台的设计方案。     

DDS+PLL系统的频谱分析

简要介绍了 ＤＤＳ＋ＰＬＬ频率合成的原理，分析了在 ＤＤＳ没有相位截断误差时，ＤＤＳ＋ＰＬＬ输出信号的杂散抑制度，并讨论了杂散抑制度与环路参数的关系。     

单片机用于小型燃油蒸汽锅炉控制设计

本文介绍了用单片机实现的小型燃油蒸汽锅炉控制系统 ,对硬件电路组成及其软件设计作了较为详细的介绍。