硬脂酸镉和山嵛酸镉混合LB膜的微结构

X-ray diffraction (XRD) was used to investigate the microstructure and phase separation of mixed multilayers of cadmium stearate (SA) and behenate (BA) deposited onto hydrophilic glass by the Langmuir-Blodgett technique. No unitary fatty acid diffraction peaks in the XRD spectra of the mixed LB films, which reveals that domains in these samples are small and uniform. The interplanar spacing of the mixed LB films changes with the ratio of BA to SA in a step-shaped curve, which suggests that with the changing of the ratio between BA and SA, only three kinds of ordered structure form in the mixed system, and each microstructure, in particular, the short chains against long chains meshed microstructure can be maintained in a certain ratio range . In addition, for the meshed microstructure, the alkyl chains of both SA and BA stand straight or may have exactly the same small tilted angle from the substrate normal, as is indicated by the symmetric and asymmetric stretching vibration of methylene (CH2) peaks which are at 2847.80 and 2914.37 cm-1respectively in the Fourier transform infrared (FT-IR) transmission spectra. The mixed system always goes through a longitudinal regularity decreasing process when BA/SA is out of the intermediate ratio range (BA/SA: 1/5-1/1), which is illustrated by the relative XRD intensity changing with the ratio of BA/ SA in a \W" shape. These results for the mixed LB films of BA/SA provide meaningful data for choosing the mixture ratio when fabricating composite films with special structure.     

Assembly of ferrocenylhexanethiol functionalized gold nanoparticles for ascorbic acid determination

Gold nanoparticles functionalized with self-assembled films of ferrocenylhexanethiol and mercaptoundecanoic acid (MUA) were used for the determination of ascorbic acid (AA). The modified nanoparticles (mNPs) were prepared by a combination of the modified Schifrin’s and the place-exchange methods. Well-organized films were obtained due to electrostatic attraction between the carboxy groups of MUA and cationic surface of poly(diallyldimethylammonium chloride). The mNP films are highly stable and can be exploited to fabricate an enzyme-less sensor for AA whose function is based on the highly electrocatalytic activity of ferrocene in the mNPs towards AA. The sensor was characterized by cyclic voltammetry and chronoamperometry. Under optimal conditions, the response current towards AA is proportional to its concentration in the range from 8.0 μM to 6.0 mM, with a detection limit of 0.14 μM (at a signal-to-noise ratio of 3). This work represents a simple controlled test-bed for fundamental studies on the use of self-assembled mNPs for sensor applications.     

Heat capacity and thermodynamic properties of 1-hexadecanol

Three different nitrocellulose (NC) samples produced from linters were investigated. DSC studies on the NC+sym-diethyldiphenylurea (C1) mixtures were carried out. The influence of storage time on their pore structures was examined using thermoporometry. The results led to conclusion that large pores are multiples of small ones. The parameter n was used to characterize the number of C1 molecules equivalent to NC ring. Its value for short storage time was about 9 but for longer time reached the value of 3. The influence of thermal history on the phase transition and porosity of the different nitrocellulose samples was different.     

Efficient conversion of fructose to 5-hydroxymethylfurfural over sulfated porous carbon catalyst

Sulfated porous carbon (PC-SO3H) catalyst was successfully synthesized from one-pot treatment of porous polydivinylbenzene in H2SO4 at 250 C, which exhibited very good catalytic performances in the production of 5-hydroxymethylfurfural from fructose.     

Experimental Study on Wave Characteristics of Stilling Basin with a Negative Step

Stilling basin with a negative step is an important structure in hydraulic systems, because it can avoid atomization and decrease scouring problems. Although stilling basins with a negative step have attracted much attention from researchers, few researchers have focused on the wave characteristics. In this research, an experimental study on the wave characteristics of stilling basins with a negative step was carried out. The wave height, average period, wave probability density and power spectrum along the flow direction of different stilling basins with a negative step were described based on the wave theory, and the results indicate discharge and step height have a significant effect on the wave characteristics. The relationships between the different characteristic wave heights, and the empirical formula for the relative characteristic wave height are obtained. Finally, the dimensionless standard deviation at the end of the stilling basin with a negative step is linearly related to the flow-energy ratio and the relative step height under B-jump.     

A New Cationic Fluorescent Probe for HSO3− Based on Bisulfite Induced Aggregation Self-Assembly

In comparison with the numerous studies that have centered on developing molecular frameworks for the functionalization of fluorescent materials, less research has addressed the influence of the side chains, despite such appendages contributing significantly to the properties and applications of fluorescent materials. In this work, a new series of cationic fluorescent probes with AIE characteristics have been developed, which exhibit unique sensitivity for charge-diffusion anions, namely HSO₃⁻, via the interactions of ions and the cooperation of the controllable hydrophobicity. The impact of the alkyl chain length attached at the cationic probes suggested that the fluorescent intensity and sensitivity of the probes could be partially enhanced by adjusting their aggregation tendency through the action of the hydrophobic effect under aqueous conditions. DLS and SEM images indicated that different particle sizes and new morphologies of the probes were formed in the anion-recognition-triggered self-assembly process, which could be attributed to the composite effect of electrostatic actions, Van der Waals forces and π-π stacking.     

Catalytic asymmetric synthesis of enantioenriched α-deuterated pyrrolidine derivatives

The recent promising applications of deuterium-labeled pharmaceutical compounds have led to an urgent need for the efficient synthetic methodologies that site-specifically incorporate a deuterium atom into bioactive molecules. Nevertheless, precisely building a deuterium-containing stereogenic center, which meets the requirement for optimizing the absorption, distribution, metabolism, excretion and toxicity (ADMET) properties of chiral drug candidates, remains a significant challenge in organic synthesis. Herein, a catalytic asymmetric strategy combining H/D exchange (H/D-Ex) and azomethine ylide-involved 1,3-dipolar cycloaddition (1,3-DC) was developed for the construction of biologically important enantioenriched α-deuterated pyrrolidine derivatives in good yields with excellent stereoselectivities and uniformly high levels of deuterium incorporation. Directly converting glycine-derived aldimine esters into the deuterated counterparts with D₂O via Cu(i)-catalyzed H/D-Ex, and the subsequent thermodynamically/kinetically favored cleavage of the α-C–H bond rather than the α-C–D bond to generate the key N-metallated α-deuterated azomethine ylide species for the ensuing 1,3-DC are crucial to the success of α-deuterated chiral pyrrolidine synthesis. The current protocol exhibits remarkable features, such as readily available substrates, inexpensive and safe deuterium source, mild reaction conditions, and easy manipulation. Notably, the synthetic utility of a reversed 1,3-DC/[H/D-Ex] protocol has been demonstrated by catalytic asymmetric synthesis of deuterium-labelled MDM2 antagonist idasanutlin (RG7388) with high deuterium incorporation.

A strategy of combining H/D-Ex and azomethine ylide-involved 1,3-DC was developed for the construction of α-deuterated pyrrolidine derivatives in good yields with excellent stereoselectivities and uniformly high levels of deuterium incorporation.