光副载波复用系统中偏振模色散对偏振度的影响

在光副载波复用系统中若使用偏振度作为偏振模色散的监测信号将会遇到灵敏度低的问题.本文首先讨论了色度色散和初始啁啾对偏振度的影响,然后找出了影响监测信号灵敏度的因素,并提出了相应的解决方法.使用一个窄带滤波器用来平衡光载波和边带的功率,偏振度对偏振模色散的灵敏度将会明显的增长.     

Theory and analysis of differentially-driven microstrip antennas

This paper studies differentially-driven microstrip antennas. The theory of microstrip antennas based on the improved cavity model is expanded to analyze the input impedance and radiation characteristics of the differentially-driven microstrip antennas. The differentially-driven microstrip antennas were fabricated. Their performances were experimentally verified. Results show that the occurrence of resonance for the differentially-driven microstrip antennas also depends on the ratio of the separation /spl xi/ of the dual feeds to the free-space wavelength /spl lambda//sub o/. When the dual feeds are located far from each other /spl xi///spl lambda//sub o/>0.1, the resonance occurs, and the input resistance at resonance is rather large. However, when the dual feeds are located near to each other /spl xi///spl lambda//sub o/<0.1, the resonance does not occur, the input resistance is quite small, and the input impedance is inductive. Compared with single-ended microstrip antennas, the differentially-driven microstrip antennas have larger resonant resistance, similar co-polar radiation patterns, and lower cross-polar radiation component.     

Complete stability of cellular neural networks with time-varying delays

In this paper, the complete stability of cellular neural networks with time-varying delays is analyzed using the induction method and the contraction mapping principle. Delay-dependent and delay-independent conditions are obtained for locally stable equilibrium points to be located anywhere, which differ from the existing results on complete stability where the existence of equilibrium points in the saturation region is necessary for complete stability and locally stable equilibrium points can be in the saturation region only. In addition, some existing stability results in the literature are special cases of a new result herein. Simulation results are also discussed by use of two illustrative examples.     

Comparisons of computed mobile phone induced SAR in the SAM phantom to that in anatomically correct models of the human head

The specific absorption rates (SAR) determined computationally in the specific anthropomorphic mannequin (SAM) and anatomically correct models of the human head when exposed to a mobile phone model are compared as part of a study organized by IEEE Standards Coordinating Committee 34, Sub-Committee 2, and Working Group 2, and carried out by an international task force comprising 14 government, academic, and industrial research institutions. The detailed study protocol defined the computational head and mobile phone models. The participants used different finite-difference time-domain software and independently positioned the mobile phone and head models in accordance with the protocol. The results show that when the pinna SAR is calculated separately from the head SAR, SAM produced a higher SAR in the head than the anatomically correct head models. Also the larger (adult) head produced a statistically significant higher peak SAR for both the 1- and 10-g averages than did the smaller (child) head for all conditions of frequency and position.     

A miniature Q-band low noise amplifier using 0.13-/spl mu/m CMOS technology

A miniature Q-band low noise amplifier (LNA) using 0.13-/spl mu/m standard mixed signal/radio frequency complementary metal-oxide-semiconductor (CMOS) technology is presented in this letter. This three-stage common source thin-film microstrip LNA achieves a peak gain of 20dB at 43GHz with a compact chip size of 0.525mm/sup 2/. The 3-dB frequency bandwidth ranges from 34 to 44GHz and the minimum noise figure is 6.3dB at 41GHz. The LNA outperforms all the reported commercial standard CMOS Q-band LNAs, with the highest gain, highest output IP3, and smallest chip size.     

Novel dual-metal gate technology using Mo-MoSi/sub x/ combination

A novel dual-metal gate technology that uses a combination of Mo-MoSi/sub x/ gate electrodes is proposed. An amorphous-Si/Mo stack was fabricated as a gate electrode for the n-channel device. It was thermally annealed to form MoSi/sub x/. Pure Mo served as the gate electrode for the p-channel device. The work functions of MoSi/sub x/ and pure Mo gates on SiO/sub 2/ are 4.38 and 4.94 eV, respectively, which are appropriate for devices with advanced transistor structures. The small increase in the work function (< 20 meV) and the negligible equivalent oxide thickness variation (< 0.08 nm) after rapid thermal annealing at 950 /spl deg/C for 30 s also demonstrate the excellent thermal stabilities of Mo and MoSi/sub x/ on SiO/sub 2/. Additional arsenic ion implantation prior to silicidation was demonstrated further to lower the work function of MoSi/sub x/ to 4.07 eV. This approach for modulating the work function makes the proposed combination of Mo-MoSi/sub x/ gate electrodes appropriate for conventional bulk devices. The developed dual-metal-gate technology on HfO/sub 2/ gate dielectric was also evaluated. The effective work functions of pure Mo and undoped MoSi/sub x/ gates on HfO/sub 2/ are 4.89 and 4.34 eV, respectively. A considerable work-function shift was observed on the high-/spl kappa/ gate dielectric. The effect of arsenic preimplantation upon the work function of the metal silicide on HfO/sub 2/ was also demonstrated, even though the range of modulation was a little reduced.     

On the performance of multicarrier DS-CDMA with imperfect power control and variable spreading factors

Multicarrier direct-sequence code-division multiple access (MC-DS-CDMA) becomes an attractive technique for the future fourth-generation (4G) wireless system because it can flexibly adapt transmission rates by changing both time and frequency spreading factors and possesses many physical-layer advantages in dispersive fading channels. However, power control errors (PCE) and the complete multiple access interference (MAI) from all the intersubcarriers may significantly degrade the performance of the MC-DS-CDMA system. In this paper, we propose an analytical method to evaluate the joint effects of the PCE and the complete MAI on the multirate MC-DS-CDMA system. From analysis and simulation, we obtain some important insights into the performance issues of the MC-DS-CDMA system. First, the effect of PCE can exacerbate the impact of the complete MAI on the MC-DS-CDMA system, or vice versa . For BER=10/sup -3/ in a considered case, the joint effect of the complete MAI and PCE further degrades the performance by 2.1 dB compared with the sum of the degradation from the complete MAI and the PCE individually. Second, increasing frequency or time-domain spreading gain can improve the performance of the MC-DS-CDMA system, but the system also becomes more sensitive to power control errors. Third, a larger PCE can possibly make the frequency-domain diversity diminish faster than the gain obtained from the time-domain spreading although an MC-DS-CDMA system with a larger frequency-domain spreading gain (M) is usually better than that with a larger time-domain spreading gain (G/sub o/). In our example, for the standard deviation of PCE (/spl sigma//sub e/) equal to 0 dB, the BERs with (M,G/sub o/)= (4, 16) and (16, 4) are 9.3/spl times/10/sup -4/ and 3.7/spl times/10/sup -5/, respectively, while for /spl sigma//sub e/=4 dB, the BER performances of the two cases are all in the order of 10/sup -3/.     

An automatic coefficient design methodology for high-order bandpass sigma-delta modulator with single-stage structure

An automatic coefficient design method for synthesis of bandpass sigma-delta modulators (BPSDMs) is presented in this brief. Single-stage BPSDM structures, cascade-of-resonator with distributed feedback, cascade-of-resonator with distributed feedforward, and a new structure with lower coefficient spread, are all used to fit the synthesized coefficients. The automatic coefficient design method is realized in an easy-to-use computer program. Even for inexperienced designers, reliable and high-tolerance BPSDM coefficients for various applications can be automatically and efficiently generated. The methodology covers many design concerns including BPSDM coefficient tolerance for circuit component mismatch, design tradeoffs among in-band noise suppression, oversampling ratio, modulator order and quantizer bit number. Finally, design examples with orders of 6 and 8, and quantizer bit number of 1-bit and 3-bit, respectively, are used for the verification of the proposed automatic coefficient design method.     

Adaptive Channel Estimation Using Pilot-Embedded Data-Bearing Approach for MIMO-OFDM Systems

Multiple-input multiple-output (MIMO) orthogonal-frequency-division-multiplexing (OFDM) systems employing coherent receivers crucially require channel state information (CSI). Since the multipath delay profile of channels is arbitrary in the MIMO-OFDM systems, an effective channel estimator is needed. In this paper, we first develop a pilot-embedded data-bearing (PEDB) approach for joint channel estimation and data detection, in which PEDB least-square (LS) channel estimator and maximum-likelihood (ML) data detection are employed. Then, we propose an LS fast Fourier transform (FFT)-based channel estimator by employing the concept of FFT-based channel estimation to improve the PEDB-LS one via choosing a certain number of significant taps for constructing a channel frequency response. The effects of model mismatch error inherent in the proposed LS FFT-based estimator when considering noninteger multipath delay profiles and its performance analysis are investigated. The relationship between the mean-squared error (MSE) and the number of chosen significant taps is revealed, and hence, the optimal criterion for obtaining the optimum number of significant taps is explored. Under the framework of pilot embedding, we further propose an adaptive LS FFT-based channel estimator employing the optimum number of significant taps to compensate the model mismatch error as well as minimize the corresponding noise effect. Simulation results reveal that the adaptive LS FFT-based estimator is superior to the LS FFT-based and PEDB-LS estimators under quasi-static channels or low Doppler's shift regimes     

Clustering for Processing Rate Optimization

Clustering (or partitioning) is a crucial step between logic synthesis and physical design in the layout of a large scale design. A design verified at the logic synthesis level may have timing closure problems at post-layout stages due to the emergence of multiple-clock-period interconnects. Consequently, a tradeoff between clock frequency and throughput may be needed to meet the design requirements. In this paper, we find that the processing rate, defined as the product of frequency and throughput, of a sequential system is upper bounded by the reciprocal of its maximum cycle ratio, which is only dependent on the clustering. We formulate the problem of processing rate optimization as seeking an optimal clustering with the minimal maximum-cycle-ratio in a general graph, and present an iterative algorithm to solve it. Experimental results validate the efficiency of our algorithm