多层光子晶体滤波器研究

从双层结构出发研究了一种由多块不同的单周期光子晶体组合而成的多层结构的滤波器，论述了这种滤波器的工作原理，研究表明这种结构适于制作带通、窄带通过、带阻、宽带带阻、高通以及其它各种性能的滤波器。实验和理论研究的结果相一致。     

掺Eu3+硅基材料的发光性质

通过溶胶－凝胶技术制备了掺Eu^3 的硅基材料并测试了其三维荧光光谱、激光谱和发射光谱，结果显示，最佳激发波波长为350nm,最强荧光波长为620nm；在350nm光激发下的发射光谱显示Eu^3 的特征发射光谱，产生4条谱带，分别是577nm(^5D0-^7F0)，588nm(^5D0-^7F1),596nm(^5D0-^7F1)和610nm(^5D0-^7F2)。     

Simulation of Birefringence and Absorption in InGaAs-GaAs Multiple Quantum Well Acoustooptic Modulators Operating Near 980 nm

This paper presents the simulation of surface acoustic wave (SAW)-induced absorption coefficient and refractive index change in InGaAs-GaAs multiple quantum well (MQW) structures operating near 980 nm. The exciton problem is solved in two dimensional momentum space to include the non-axial effect due to strain induced valance band mixing and nonparabolicity. The optical absorption coefficient and refractive index changes near the band gap in the MQWs are calculated as a function of SAW power.     

IP网络传输技术的研究与发展

分析了IP网络传输技术的现状和以太网技术的发展 ,研究了几种新的以太网传输技术 ,提出了以太网技术将覆盖从LAN、MAN乃至WAN ,成为全面构建下一代网络主流技术的新观点。     

偏硅酸钙中Pr3+的4f5d态的光谱特性及Pr3+→Gd3+的能量传递

合成了高效发射UV光的CaSiO3:Pr^3 新型荧光体，研究了室温下Pr^3 的4f5d态的发射和激发光谱，Pr^3 的4f5d态的最低子能级向4f^2组态的^3H4，^3H6和^1G4能级跃迁产生UV发射，并不伴随有4f-4f能级跃迁的可见光发射。Pr^3 的浓度猝灭是由于辐射和无辐射能量传递造成的，同时，在CaSiO3中，存在Pr^3 →Cd^3 的能量传递，探讨了其能量传递特性。     

Iterative receivers for space-time block-coded OFDM systems indispersive fading channels

We consider the design of iterative receivers for space-time block-coded orthogonal frequency-division multiplexing (STBC-OFDM) systems in unknown wireless dispersive fading channels, with or without outer channel coding. First, we propose a maximum-likelihood (ML) receiver for STBC-OFDM systems based on the expectation-maximization (EM) algorithm. By assuming that the fading processes remain constant over the duration of one STBC code word and by exploiting the orthogonality property of the STBC as well as the OFDM modulation, we show that the EM-based receiver has a very low computational complexity and that the initialization of the EM receiver is based on the linear minimum mean square error (MMSE) channel estimate for both the pilot and the data transmission. Since the actual fading processes may vary within one STBC code word, we also analyze the effect of a modeling mismatch on the receiver performance and show both analytically and through simulations that the performance degradation due to such a mismatch is negligible for practical Doppler frequencies. We further propose a turbo receiver based on the maximum a posteriori-EM algorithm for STBC-OFDM systems with outer channel coding. Compared with the previous noniterative receiver employing a decision-directed linear channel estimator, the iterative receivers proposed here significantly improve the receiver performance and can approach the ML performance in typical wireless channels with very fast fading, at a reasonable computational complexity well suited for real-time implementations     

自由基-分子反应:F+Propene(CH2CHCH3)的从头算研究

采用从头算CCSD(T)/6-311 G(2d,2p)//B3LYP/6-311G(d,p)方法,研究了自由基-分子反应F CH2CHCH3的各种不同的反应通道．该反应主要是通过复合物形成机制进行,即F分别加到碳碳双键的两端形成自由基复合物1和2．这两种亚稳态自由基会解离成三种产物:H C3H5F、CH3 C2H3F和HF C3H5．理论计算结果表明,生成CH3 C2H3F是反应的主要通道,而生成H C3H5F和HF C3H5对产物也有一定的贡献．这一结果和实验符合得很好．     

高性能ZnO纳米块体材料的制备及其拉曼光谱学特征

利用六面顶高压设备制备了高密度、低脆性、纳米级的ZnO块体材料，用MDI/JADE5 X射线衍射仪(Cu靶)和XL30S-FEG场发射扫描电子显微镜对高压样品的相组成、晶粒尺寸及微观形貌进行了表征.利用E55+FRA106/5傅里叶变换激光拉曼光谱仪通过ZnO块体样品位于50—500cm^-1之内的拉曼光谱, 研究了极性半导体纳米材料的拉曼光谱学特征.发现在极性半导体ZnO纳米块体材料中，没有出现明显的尺寸限制效应. 关键词： ZnO纳米块体 拉曼光谱 尺寸限制效应     

长波长大应变InGaAs/InGaAsP分布反馈激光器的材料生长与器件制备

采用低压金属有机化合物气相沉积法(LP-MOCVD)生长并制作了1.6—1.7μm大应变InGaAs/InGaAsP分布反馈激光器.采用应变缓冲层技术，得到质量良好的大应变InGaAs/InP体材料.器件采用了4个大应变的量子阱，加入了载流子阻挡层改善器件的温度特性.1.66μm和1.74μm未镀膜的3μm脊型波导器件阈值电流低(小于15mA)，输出功率高(100mA时大于14mW).从10—40℃，1.74μm激光器的特征温度T₀=57K，和1.55μm InGaAsP分布反馈激光器的特征温度相当. 关键词： MOCVD InGaAs/InGaAsP 应变量子阱 分布反馈激光器     

Multiporous hollow polymer particles

Hollow particles with interconnected cavities have been prepared by a simple modified suspension polymerization of acrylate monomers in the incorporation of a phase inversion process and polymerizable emulsifier. The morphology of particles has been characterized by scanning electron micrographs (SEMs). Based on observations made using an optical microscope equipped with a digital camera and SEM images of particles obtained under different conditions, the formation mechanisms for multiporous hollow particles are discussed.