纳米4-H碳化硅薄膜的掺杂现象

对纳米晶SiC薄膜进行了P和B的掺杂,B掺杂效率比P高,其暗电导预前因子与激活能遵守Meyer-Neldel规则,并有反转Meyer-Neldel规则出现.掺杂效率比非晶态碳化硅薄膜高是纳米碳化硅薄膜的特点之一.非晶态中的隧穿和边界透射对输运有一定贡献.     

准八木型宽带微带天线单元的设计

利用三维电磁场仿真软件(Ansoft HFSS)对准八木型微带天线单元进行了仿真计算.研究了天线结构参数对天线性能的影响.最后得到一个良好的设计。实验结果与计算值相吻合。     

在SQUID心磁测量中基于奇异值分解和自适应滤波的噪声消除法

采用矩阵奇异值分解(singular value decomposition, SVD)的方法，对高温射频超导量子干涉仪(HTc rf-SQUID)采集到的单通道心磁信号进行处理.证明了对于近似周期性的心磁信号，在无参考噪声的情况下矩阵奇异值分解的方法与自适应窄带陷波相结合有较好的消除广谱噪声的效果. 关键词： 高温射频超导量子干涉仪 心磁信号 奇异值分解 噪声消除     

CH分子束的强度与CH_4/He混合配比的关系及CH(A~2Δ)振转温度的计算

为了获得CH分子束及其相关特性,以氦气为载气,利用直流脉冲放电技术产生了CH分子束。实验记录了放电时间相对于脉冲分子束不同延时CH光谱信号强度的变化,放电相对延时为460μs左右获得最大的信号强度。研究了在保持CH4/He总气压3 atm和放电电压-4 kV不变的条件下CH分子束强度与不同配比的关系,建立了理论模型,对实验数据进行了理论拟合,拟合曲线与实验结果符合较好,配比为1%(甲烷与氦的气压比为1∶99)左右能够维持较稳定的放电现象和较强的放电强度而获得较强的CH自由基束流。在这一配比下对CH(A2Δ-X2Π)(0,0)带发射光谱进行探测和分析,获得CH(A2Δ)转动温度和振动温度分别为2455 K和4575 K,并估计此时每个脉冲中大约包含1013~1014个CH自由基。     

正相协列乘积和的重对数律与强大数律

证明了强平稳正相协列乘积和的重对数律与不同分布正相协列乘积和的强大数律,指出了部分和服从强大数律但乘积和未必服从强大数律这一事实,并讨论了定理2中一个条件的必要性．     

Influence of fluoride on f-f transitions of Eu in LiEuM2O8 (M=Mo, W)

The influence of fluoride on the luminescence of LiEuM₂O₈ (M=Mo, W) was studied. LiEuMo₂O₈ and LiEuW₂O₈ formed the whole range of solid solutions, which emitted intense red luminescence under the excitations by 395, 465 and 535 nm wavelengths. When doped with fluoride, the materials also formed solid solutions and the luminescent intensity was remarkably enhanced. The phosphor with optimized compositions in this system would be a promising red component for solid-state lighting devices based on GaN light-emitting diodes.     

心脏黏液瘤的超微结构研究

对8例心脏黏液瘤进行了临床病理总结，着重进行了超微结构的研究，结果表明黏液瘤细胞有4种超微结构表现：（1）原始间叶细胞；（2）纤维母细胞样；（3）肌纤维母细胞样；（4）上皮样。提出心脏黏液瘤细胞起源于原始间叶细胞，有纤维母细胞、肌及上皮样分化。并且提出瘤细胞参与黏液瘤基质的形成。     

Redefining Event Variables for Efficient Modeling of Continuous-Time Batch Processing

We define events so as to reduce the number of events and decision variables needed for modeling batch-scheduling problems such as described in [15]. We propose a new MILP formulation based on this concept, defining non-uniform time periods as needed and decision variables that are not time-indexed. It can handle complicated multi-product/multi-stage machine processes, with production lines merging and diverging, and with minimum and maximum batch sizes. We compare it with earlier models and show that it can solve problems with small to medium demands relative to batch sizes in reasonable computer times.     

在CPM非稳腔Nd:YAG激光器中用被—被动锁模方法选单脉冲的探讨

在CPM Nd:YAG非稳腔激光器中,我们使用透过率较大的可饱和吸收体使单脉冲序列中的脉冲个数减少到3—5个,在输出的单序列中再使用非线性介质进行处理,可以得到比较接近的单脉冲输出。     

Frequency domain transmission properties of multi-VIAS

TheS parameters of multi-vias in Multi-Chip Module(MCM) package are extracted by the Finite Difference Time Domain(FDTD) method combined with the Fourier transform and theory of network. The results demonstrate that excellent transmission properties are available at least below10GHz in Ceramic MCM(MCM-C) package and30GHz in Deposited MCM(MCM-D) package, and the transmission properties are not sensitive to the given distance between two proximate vias.