Changes in the physical properties of low bandgap polymer after interaction with ionic liquids

Over the past few years, polymers shown comprehensive utilization in optical devices, solar cells, sensors, and other such devices. However, the efficiency of these devices remains a problem. We have synthesized new thiophene based, lowband gap polymer, poly(2-heptadecyl-4-vinylthieno[3,4-d] [1,3] selenazole) (PHVTS) and investigated the interactions between the PHVTS and ionic liquids (ILs), in this study. We have used imidazolium- and ammonium-family ILs, and studied the interactions using various spectroscopic techniques such UV–visible, FTIR, and confocal Raman spectroscopies. Additionally, we studied surface morphology of the polymer-IL film. Spectroscopic studies show that both families of ILs can interact with the newly synthesized polymer poly(2-heptadecyl-4-vinylthieno[3,4-d] [1,3] selenazole). However, the imidazolium-family Ionic Liquid-polymer (IL-polymer) mixture films show higher conductivities than ammonium-family IL–polymer mixture films.     

A Simple Homoleptic Gallium(I) Olefin Complex: Mimicking Transition‐Metal Chemistry at a Main‐Group Metal?

The earth‐metal olefin complex [Ga ^I (COD)₂]⁺[Al(OR^F)₄]^? (COD=1,5‐cyclooctadiene; R^F=C(CF₃)₃) constitutes the first homoleptic olefin complex of any main‐group metal accessible as a bulk compound. It is straight forward to prepare in good yield and constitutes an olefin complex of a main‐group metal that—similar to many transition‐metals—may adopt the +1 and +3 oxidation states opening potential applications. Crystallographic‐, vibrational‐ and computational investigations give an insight to the atypical bonding between an olefin and a main‐group metal. They are compared to classical transition‐metal relatives.     

Synthesis of 2D Germanane (GeH): a New,Fast, and Facile Approach

Germanane (GeH), a germanium analogue of graphane, has recently attracted considerable interest because its remarkable combination of properties makes it an extremely suitable candidate to be used as 2D material for field effect devices, photovoltaics, and photocatalysis. Up to now, the synthesis of GeH has been conducted by substituting Ca by H in a β‐CaGe₂ layered Zintl phase through topochemical deintercalation in aqueous HCl. This reaction is generally slow and takes place over 6 to 14 days. The new and facile protocol presented here allows to synthesize GeH at room temperature in a significantly shorter time (a few minutes), which renders this method highly attractive for technological applications. The GeH produced with this method is highly pure and has a band gap (E_g) close to 1.4 eV, a lower value than that reported for germanane synthesized using HCl, which is promising for incorporation of GeH in solar cells.     

Enhanced Catalytic Activity of Cobalt Porphyrin in CO2 Electroreduction upon Immobilization on Carbon Materials

In a comparative study of the electrocatalytic CO₂ reduction, cobalt meso-tetraphenylporphyrin (CoTPP) is used as a model molecular catalyst under both homogeneous and heterogeneous conditions. In the former case, employing N,N-dimethylformamide as solvent, CoTPP performs poorly as an electrocatalyst giving low product selectivity in a slow reaction at a high overpotential. However, upon straightforward immobilization of CoTPP onto carbon nanotubes, a remarkable enhancement of the electrocatalytic abilities is seen with CO₂ becoming selectively reduced to CO (>90 %) at a low overpotential in aqueous medium. This effect is ascribed to the particular environment created by the aqueous medium at the catalytic site of the immobilized catalyst that facilitates the adsorption and further reaction of CO₂. This work highlights the significance of assessing an immobilized molecular catalyst from more than homogeneous measurements alone.     

Signal-Induced Release of Guests from a Photolatent Metal–Phenolic Supramolecular Cage and Its Hybrid Assemblies

The coordination chemistry of plant polyphenols and metal ions can be used for coating various substrates and for creating modular superstructures. We herein explored this chemistry for the controlled release of guests from mesoporous silica nanoparticles (MSNs). The selective adsorption of tannic acids (TAs) on MSN silica walls opens the MSN mesoporous channels without disturbing mass transport. The channel may be closed by the coordination of TA with Cu^II ions. Upon exposure to light, photolysis of Trojan horse guests (photoacid generators, PAGs) leads to acid generation, which enables the release of payloads by decomposing the outer coordination shell consisting of TA and Cu^II. We also fabricated a modular assembly of MSNs on glass substrates. The photoresponsive release characteristics of the resulting film are similar to those of the individual MSNs. This method is a fast and facile strategy for producing photoresponsive nanocontainers by non-covalent engineering of MSN surfaces that should be suitable for various applications in materials science.     

Morphology-Directed Selective Production of Ethylene or Ethane from CO2 on a Cu Mesopore Electrode

The electrocatalytic conversion of CO₂ to value-added hydrocarbons is receiving significant attention as a promising way to close the broken carbon-cycle. While most metal catalysts produce C₁ species, such as carbon monoxide and formate, the production of various hydrocarbons and alcohols comprising more than two carbons has been achieved using copper (Cu)-based catalysts only. Methods for producing specific C₂ reduction outcomes with high selectivity, however, are not available thus far. Herein, the morphological effect of a Cu mesopore electrode on the selective production of C₂ products, ethylene or ethane, is presented. Cu mesopore electrodes with precisely controlled pore widths and depths were prepared by using a thermal deposition process on anodized aluminum oxide. With this simple synthesis method, we demonstrated that C₂ chemical selectivity can be tuned by systematically altering the morphology. Supported by computational simulations, we proved that nanomorphology can change the local pH and, additionally, retention time of key intermediates by confining the chemicals inside the pores.     

Thermal stability of ester linkage in the presence of 1,2,3‐Triazole moiety generated by click reaction

The copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC), so‐called “click” reaction, is one of most useful synthetic strategies to connect two polymer chains. 1,2,3‐Triazole ring (TA) produced by the click reaction has good thermal and chemical stability. However, we observed that block copolymers synthesized by the click reaction showed thermal degradation to give homopolymers when they are thermally annealed at high temperature, which is required for obtaining equilibrium microdomain structure. To investigate the origin of thermal instability of block copolymers, we synthesized model polystyrenes (PSs) using systematically designed bi‐functional atom transfer radical polymerization (ATRP) initiators containing TA. PS including both ester and TA groups showed thermal decomposition at relatively low temperature (e.g., 140 °C). MALDI‐TOF analysis clearly demonstrated that the cleavage site is the ester group adjacent to TA. We also found that the bromine group located at the polymer chain end plays an important role in pyrolysis of ester groups at low temperature. The pyrolysis occurs by syn‐elimination of the ester group. This result implies that the phase behavior of block copolymer synthesized by click reaction should be carefully investigated when high temperature thermal annealing is required. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 427–436     

Biomimetic pH/redox dual stimuli‐responsive zwitterionic polymer block poly(L‐histidine) micelles for intracellular delivery of doxorubicin into tumor cells

A series of pH/redox dual stimuli‐responsive poly(2‐methacryloyloxyethyl phosphorylcholine)₂₅‐block‐poly(l ‐histidine)_n (p[MPC])₂₅‐b‐p[His]_n, n = 20, 35, 50, and 75) copolymers consisting of a pH‐responsive p(His)_n block and a biocompatible phospholipid analog p(MPC) block connected by a redox‐responsive disulfide linker have been synthesized. The block copolymers are self‐assembled into uniform micelles (～100 nm) in which doxorubicin (Dox) is efficiently encapsulated. The in vitro release profile shows an enhanced release of Dox at low pH (5.0) in 10 mM glutathione (GSH). The in vitro cell viability assays performed using various cell lines show that the blank hybrid micelles have no acute or intrinsic toxicity. A pH‐dependent cytotoxicity is observed with the Dox‐loaded micelles, especially at pH 5.0. Moreover, confocal microscopy images and flow cytometry results show the pH‐dependent cellular uptake of Dox‐loaded micelles. Therefore, the Dox‐loaded micelles can be considered a good candidate for cancer therapy. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2061–2070     

Measurement of excitation functions of the natAg(α,x) reactions up to 45 MeV

Journal of Radioanalytical and Nuclear Chemistry - We measured excitation functions for the production of the 108m,108g,109g,110m,110g,111gIn, the 109g,111mCd, and the 105g,106m,110m,111gAg in...     

Reliable and reproducible colorimetric detection of mercury ions (Hg2+) using green synthesized optically active silver nanoparticles containing thin film on flexible plastic substrate

Journal of Solid State Electrochemistry - Green synthesis of optically active silver nanoparticles (Ag) containing thin film on flexible plastic strip substrate has been carried using guava leaf...