Catalytic Spectrophotometric Determination of Ultratrace Amounts of Silver with Solubilizing Effect of Nonionic Surfactant

ＩｎｔｒｏｄｕｃｔｉｏｎＴｒｉａｚｅｎｅｒｅａｇｅｎｔｓａｒｅｉｎｔｅｒｅｓｔｉｎｇｂｅｃａｕｓｅｏｆｔｈｅｉｒｓｔｒｏｎｇｃｏｍｐｌｅｘａｔｉｏｎａｂｉｌｉｔｉｅｓｗｉｔｈｔｒａｎｓｉｔｉｏｎｍｅｔａｌｓ .1 6Ｈｏｗｅｖｅｒ,ｌｉｔｔｌｅｄｅｃｏｌｏｒａｔｉｏｎｏｆｔｈｅｍｃａｔａｌｙｚｅｄｂｙｓｉｌｖｅｒｉｏｎｈａｓｂｅｅｎｓｔｕｄｉｅｄｉｎａｎａｌｙｔｉｃａｌｃｈｅｍｉｓｔｒｙ .Ｍａｎｙａｎａｌ ｙｓｉｓｔｓｈａｖｅｒｅｐｏｒｔｅｄｔｈｅｕｓｅｏｆｃａｔａｌｙｔｉｃｒｅａｃｔｉｏｎｓｆｏｒｔ…     

Rapid detection of an anthrax biomarker by surface-enhanced Raman spectroscopy

A rapid detection protocol suitable for use by first-responders to detect anthrax spores using a low-cost, battery-powered, portable Raman spectrometer has been developed. Bacillus subtilis spores, harmless simulants for Bacillus anthracis, were studied using surface-enhanced Raman spectroscopy (SERS) on silver film over nanosphere (AgFON) substrates. Calcium dipicolinate (CaDPA), a biomarker for bacillus spores, was efficiently extracted by sonication in nitric acid and rapidly detected by SERS. AgFON surfaces optimized for 750 nm laser excitation have been fabricated and characterized by UV-vis diffuse reflectance spectroscopy and SERS. The SERS signal from extracted CaDPA was measured over the spore concentration range of 10(-14)-10(-12) M to determine the saturation binding capacity of the AgFON surface and to calculate the adsorption constant (Kspore=1.7 x 10(13) M(-1)). At present, an 11 min procedure is capable of achieving a limit of detection (LOD) of approximately 2.6 x 10(3) spores, below the anthrax infectious dose of 10(4) spores. The data presented herein also demonstrate that the shelf life of prefabricated AgFON substrates can be as long as 40 days prior to use. Finally, these sensing capabilities have been successfully transitioned from a laboratory spectrometer to a field-portable instrument. Using this technology, 10(4) bacillus spores were detected with a 5 s data acquisition period on a 1 month old AgFON substrate. The speed and sensitivity of this SERS sensor indicate that this technology can be used as a viable option for the field analysis of potentially harmful environmental samples.     

Separation of lidocaine and its metabolites by capillary electrophoresis using volatile aqueous and nonaqueous electrolyte systems

The separation of the basic drug lidocaine and six of its metabolites has been investigated both by using volatile aqueous electrolyte system, at low pH and by employing non-aqueous electrolyte systems. In aqueous systems, the best separation of the compounds under the investigated conditions was achieved by using the electrolyte 60 mM trifluoroacetic acid (TFA)/triethylamine (TEA) at pH 2.5 containing 15% methanol. With this electrolyte, all seven compounds were well separated with high efficiency and migration time repeatability. The separations with bare fused-silica capillaries and polyacrylamide-coated capillaries were compared with higher separation efficiency with the latter. On the other hand, near baseline separation of all the seven compounds was also obtained by employing the non-aqueous electrolyte, 40 mM ammonium acetate in methanol and TFA (99:1, v/v), with comparable migration time repeatability but lower separation efficiency relative to the aqueous system.     

Highly efficient separation of isomeric epoxy fatty acids by micellar electrokinetic chromatography

A capillary electrophoresis (CE) method has been developed for simple and direct separation of cis- and trans-12,13-epoxy-9(Z)-octadecenoic acid and 9,10-epoxy-12(Z)-octadecenoic acid isomers. Separation was performed in micellar electrokinetic capillary chromatography (MEKC) using a buffer consisting of 25 mM borate (pH 9.20), 10 mM sodium dodecyl sulfate (SDS) and 10% v/v acetonitrile. The key variables, concentrations of SDS and organic modifier, were optimized by the application of a factorial experimental design. The use of a low micellar concentration, just above critical micelle concentration (CMC), in a background electrolyte containing an organic modifier not only made it possible to dissolve and separate highly hydrophobic fatty acid isomers, but also resulted in improved separation efficiency and selectivity. Separation efficiency up to 4 x 10(5) theoretical plates/m was achieved under an optimized condition. Also investigated were the influence of temperature on separation and the effect of organic modifier concentration on the dynamic exchange of the analytes between micelles and the bulk of the buffer solution. Direct UV was applied for detection of the fatty acids.     

Native and stearic acid modified ceria-zirconia supports in normal and reversed-phase HPLC

Porous ceria-zirconia composite with narrow particle size distribution and large specific surface area was synthesized by a sol-gel process. Chromatographic properties of the native supports was investigated in normal phase mode for the separation of test mixtures of basic, neutral and acidic compounds. The new packing material exhibited polar and basic properties, which are suitable for the separation of basic compounds. Lypophilic packing has been obtained by the modification of the ceria-zirconia with stearic acid, which exhibited strong hydrophobicity relative to the native packing. Therefore, the modified ceria-zirconia behaves as a reversed-phase packing material. Different selectivity towards basic compounds was observed on the new packing compared to the native ceria-zirconia and conventional ODS stationary phase.     

The design of an irradiator for the continuous processing of liquid latex

This paper presents anew design concept for a gamma irradiation plant for the continuous processing of pumpable liquids. Typical applications of such a plant include

• * the irradiation vulcanisation of natural latex rubber

• * disinfection of municipal sewage sludge for agricultural use

• * sterilisation of liquids in the pharmaceutical and cosmetics industries

• * industrial processing of bulk liquids

The authors describe the design and operation of the latex irradiator now operating on a small production scale in Malaysia and proposed developments.

The design allows irradiation processing to be carried out under an inert or other gaseous environment.

State-of-the-art computer control system ensures the fully automatic processing operation needed by industrial computers.     

可再生甲壳素吸附铬（Ⅵ）的特性研究

可再生甲壳素吸附铬（Ⅵ）的特性研究陈炳稔＊汤又文李国明万春华（华南师范大学化学系广州５１０６３１）关键词可再生甲壳素，制备，铬（Ⅵ），吸附１９９７－０８－１９收稿，１９９７－１２－２３修回广东省科委及高教厅资助课题利用甲壳素作为铬（Ⅵ）的捕集剂已有报...     

Separation of Dyes from Aqueous Solutions by Paper Adsorption

Separation of the dyes methyl violet, methylene blue, and congo red from aqueous solutions by paper capillary permeation adsorption method was studied using paper. Nearly 100% of the investigated dyes could be separated under the optimum conditions. The effect of pH on the separation efficiency was studied in particular. At pH 5–9, 1.3–11, and 7–11, the maximum separation was achieved for methyl violet, methylene blue and congo red, respectively. The effects of dye concentration and some foreign ions on the separatability were examined. Moreover, the selective separation of some dyes was attempted by elution with chemical reagents.     

Identification and quantification of 13 components in Angelica sinensis (Danggui) by gas chromatography-mass spectrometry coupled with pressurized liquid extraction

Angelica sinensis (Danggui in Chinese), a well-known traditional Chinese medicine, is also used as a health food product for women's care in Europe and America. Therefore, the demand for Danggui is enormous throughout the world. Due to the shortage of Angelica sinensis, Angelica acutiloba and Angelica gigas are commonly used as the substitutes of Danggui in the market of southeast Asia. However, the three common Angelica roots showed variation in their genetic and chemical composition. Up to date, it is thought that ferulic acid, ligustilide and other phthalides such as butylidenephthalide are the biologically active components of Danggui. In this paper, the contents of 13 compounds including ferulic acid, Z-ligustilide, E-ligustilide, Z-butylidenephthalide, E-butylidenephthalide, 3-butylphthalide, 3-butylidene-4-hydroxyphthalide, senkyunolide A, 6,7-epoxyligustilide, senkyunolide F, senkyunolide H, senkyunolide I, and 6,7-dihydroxyligustilide were determined or estimated by using gas chromatography-mass spectrometry (GC-MS) coupled with pressurized liquid extraction (PLE). The results showed that GC-MS coupled with PLE offered a simple, rapid and high sensitive method to analysis of components in Angelica root. And the contents of investigated compounds in Angelica sinensis, Angelica acutiloba and Angelica gigas, which are used as Danggui in China, Japan and Korea, respectively, were highly variant. It is thought that interaction of multiple chemical compounds contributes to the therapeutic effects of Chinese medicines. However, the overall clinical efficacy of these different Danggui has not been determined. Therefore, comparison of chemical components and pharmacological activities of different Angelica root is helpful to elucidate the mechanism of therapeutic effects of Danggui.