0.18μm CMOS工艺栅极氧化膜可靠性的衬底和工艺依存性

用斜坡电压法(Voltage Ramp, V-ramp)评价了0.18μm双栅极 CMOS工艺栅极氧化膜击穿电量(Charge to Breakdown, Q_bd)和击穿电压(Voltage to Breakdown, V_bd). 研究结果表明，低压器件(1.8V)的栅极氧化膜(薄氧)p型衬底MOS电容和N型衬底电容的击穿电量值相差较小，而高压器件(3.3V)栅极氧化膜(厚氧)p衬底MOS电容和n衬底MOS电容的击穿电量值相差较大，击穿电压测试值也发现与击穿电量 关键词： 薄氧 可靠性 击穿电压 击穿电量     

泛函梯度数值计算的一种新方法—正交试验法

本文研究并揭示了L_(2~a)(2~(2~a-1))型正交表行(列)间的递推规律,提出了一种泛函梯度数值计算的新方法——正交试验法,该方法在计算速度和精度上优于直接梯度法;在通用性及节省内存方面优于伴随算子法。     

Microwve inducdd catalytic decomposition of some alberta oil sands and bitumens

The processing of oil sands materials and upgrading of bitumens present a variety of problems for conventional technologies. This article describes a preliminary study of the concept of using microwave induced catalytic techniques to decompose the complex and viscous hydrocarbon compounds contained in these materials to allow efficient extraction of volatile and economically useful organic products such as C₂ and C₃ hydrocarbons. Addition of water to the tar sand material prior to reaction facilitated separation from the sand component as well as promoting the formation of economically very useful, liquid, oxygenated hydrocarbon products.     

Photochemistry of dibenzo-1,4-dioxins: intramolecular rearrangement-reduction through observable 2,2′-biphenylquinones

The photochemistry of dibenzo-1,4-dioxin (7) and 2,3,7,8-tetramethyldibenzo-1,4-dioxin (15) — both of which have the parent ring system of the well-known enrimental contaminant dioxin— has been studied in aqueous solution and in selected organic solvents. It is shown that a novel intramolecular photorearrangement is the major mode of reaction for 7 and the exclusive reaction for 15, giving rise to observable (by UV—Vis spectrophotometry) intermediate 2,2′-biphenylquinones. Subsequent reduction by the organic co-solvent gives rise to 2,2′-biphenols as major or exclusive product. Thus, photolysis of these compounds generates oxidizing agents in the biphenylquinones. Photolysis in the presence of added N_aBH₄ resulted is greatly enhanced yields of biphenols along with more than 90% material balance. These findings have relevance to dioxin photodecomposition, which can be used as a method for its destruction.     

Surface heating and energy transfer in pulsed microwave catalytic systems: A microwave-induced acoustic study

Since the early demonstrations of our concept of pulsed microwave catalysis in chemistry, we have witnessed the coming of age of the technique as an enabling technology in the industrial world, despite the inadequate understanding of the basic mechanisms of how microwaves interact with metallic surface sites and the subsequent energy transfer. We shall present here some very recent developments of the microwave-induced acoustic technique and its applications to a better understanding of the basic surface heating and energy transfer phenomena in pulsed microwave catalytic systems.     

用正交试验法探索交沙霉素片剂处方

新药交沙霉素能否制成片剂，取决于能否找到最佳的片剂处方．本文运用正交试验法成功地解决了这一问题．     

一类两两NQD列乘积和的Jamison型强稳定性

研究了一类不同分布两两NQD列的Jamison型加权乘积和的强稳定性,推广了不同分布独立列部分和与同分布NQD列部分和情形相类似的结论.     

Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

陈化温度和Fe/Zr配比对SO42-/Fe2O3-ZrO2固体超强酸结构与性能的影响

用低温陈化法制备了SO42 -/Fe2 O3 ZrO2 (简称SFZ)固体超强酸催化剂 ,用红外光谱 (IR)和X光衍射(XRD)对其结构进行了表征 ,并考察了它对合成癸二酸二正丁酯的催化性能 .IR谱显示 ,低温陈化的SFZ样品在10 70cm-1处吸收峰远强于常温陈化样品 .XRD分析则显示 ,在焙烧温度为 6 5 0℃、Fe/Zr为 2∶1时 ,低温陈化的样品出现了亚稳态的ZrO2 四方晶相 .该样品在催化酯化反应中使产率达 90 %以上 ,高于常温陈化样品的 30 % .研究结果表明 :在其他条件不变时 ,低温陈化所出现的亚稳态的ZrO2 四方晶相是表面酸性和催化活性增加的微观原因     

The fabrication and characterization of poly(lactic acid) scaffolds for tissue engineering by improved solid–liquid phase separation

In this article a new technique was developed to fabricate scaffolds with a unique microstructure by solid–liquid separation in combination with particulate-leaching. Firstly, the effects of polymer concentration, quenching temperature on the porous morphology and the mechanical property of obtained scaffolds during solid–liquid separation have been investigated. Then, salt granules as porogen were introduced into the solid–liquid phase separation to produce the unique pore structure of the scaffold. The pore diameter of the scaffold could be controlled with the particulate size and the wall of pores possessed special microstructure, which enhanced the pore interconnectivity. The cell culture results confirmed that a good interconnectivity of the scaffold prepared by the improved solid–liquid separation was useful for nutrition transportation and cell proliferation. Copyright © 2003 John Wiley & Sons, Ltd.