Electrochemical Detection of Clenbuterol in Pig Liver at Pyrrole-DNA Modified Boron-doped Diamond Electrode

Introduction Clenbuterol { 4-amino-[( tert-butylamino) meth-yl]-3,5-dichlorobenzyl alcohol hydrochloride} is aβ-agonist drug[1]. It can improve the ratio of muscle tofat when it is administrated with high doses to ani-mals[2,3]. However, the residues of clenbuterol(CL)are toxic to humans, leading to sickness and possibleheart complication[4]. It has been reported that CL iseasy to accumulate in animal livers.Recently, some analytical methods for the detec-tion of CL, such as HPLC[5], GC…     

Controlled Fabrication of Cd-Bi Nanoparticles via Sonochemical Method

IntroductionMetal or alloy nanoparticles,because of their con-spicuous physicochemical properties,have been widelyapplied to various fields such as electronics,catalysis,magnetism,and corrosion-resistant materialsfields[1—4].It has been estimated that the particle sizeand the properties of nanoparticles depend strongly onthe specific method of fabrication and the applied ex-periment conditions,which makes the controlled syn-thesis of nanomaterials become an increasingly activeand important ar…     

合成方法对MCM-22分子筛的结构、性质及催化性能的影响

在水热条件下分别以动态法和静态法合成了高纯度和高结晶度的MCM-22分子筛.采用N2吸附、XRD、TEM和FTIR等方法研究了制备方法对分子筛的结构及性质的影响.结果表明,动态法合成的MCM-22比静态法合成的分子筛的晶粒小,酸量低.在丙酮一步法合成甲基异丁基酮反应中,静态条件下合成的MCM-22为载体的催化剂的丙酮转化率较高,这是由于该分子筛的酸量较高所致.而MIBK的选择性则呈相反趋势,这可能与动态条件下合成的分子筛粒径小、孔道短有关.     

DL-PhEtSiIndCpYbCl的合成及表征

以苯基三氯硅烷为原料,先后与乙基溴化镁、茚基锂、茂基锂反应,制备了苯基乙基茚基茂基硅烷(PhEtSiIndCp)。以此为配体与正丁基锂BuLi反应生成二锂盐,再与YbCl3反应,生成苯基乙基硅基桥联茚基茂基镱一氯化物(PhEtsiIndcpYbcl),其结构经^1HNMR,IR,Ms及元素分析表征。     

微波辅助制备均分散PbS纳米棒

在十二烷基苯磺酸钠存在下,以0．5℃．h^-1的速度均匀降温48h,微波辅助成核合成均分散PbS纳米棒。实验结果表明微波辐照促进一次成核,抑制二次成核,是形成PbS纳米棒的关键。PbS纳米棒的结构经X-射线粉末衍射,透射电子显微镜和荧光光谱表征。     

Stabilities and Electronic Spectra for C78O2 Isomers

1 INTRODUCTION Functional derivatives of fullerenes have aroused chemists’ interest and monofunctional products are accompanied by difunctional derivatives[1～3]. Diede- rich[1] prepared and detected C70O2 by the FAB mass spectrum. Kalsbeck[2] synthesized C60On (n = 1～4) by electrochemical oxidation of C60. Wood[3] investi- gated photolysis of a crude fullerene mixture and obtained C60On (n = 2～5) and C70O2. Menon[4] stu- died the optimized structures and electronic proper- ties o…     

Preliminary communication - The synthesis and thermotropic liquid crystalline behaviour of novel main chain poly(aryl ether ketone)s containing a lateral phenyl group

Novel main chain poly(aryl ether ketone)s containing a lateral phenyl group were synthesized by nucleophilic substitution reactions of 4,4-biphenol and phenylhydroquinone with either 4,4-difluorobenzophenone or 1,4-bis(4-fluorobenzoyl)benzene and their thermotropic liquid crystalline properties were characterized by a variety of experimental techniques. Thermotropic liquid crystalline behaviour was observed in the copolymers containing 50 and 70 mol% biphenol. Melting (Tm) and isotropization (Ti) transitions both appeared on the DSC thermograms. A banded texture was formed after shearing the sample in the liquid crystalline nematic state. As expected, each of the copolymers had a relatively lower melting transition than the biphenol-based homopoly(aryl ether ketone)s because of the copolymerization effect of the crystal-disrupting monomer phenylhydroquinone.     

Effect of Precursor Drying Process on the Properties of LiFePO4/C Composite with Low Carbon Content

<正>Properties of two LiFePO_4/C composites with low carbon content synthesized from precursors dried by spray drying and blast drying are investigated by scanning electron microscopy, X-ray diffraction, Raman spectroscopy and electrochemical measurements. The two samples have a different morphology and particle size, while the structure of LiFePO_4 is unaffected. The LiFePO_4/C composite prepared from the precursor dried by blast drying has a much lower surface resistance and a much better rate capability because the deposited carbon is more graphite-like and more conductive. The cycling performance is also much better for the LiFePO_4/C composite prepared from the precursor dried by blast drying because only a slight impedance growth is involved upon cycling. These results suggest that the precursor drying process has a significant impact on the properties of LiFePO_4/C composite, and its effect is highly dependent on the carbon content.     

新型超支状液晶核酸传感器用于p53突变基因的检测

基于核酸杂交链式反应影响液晶取向的原理, 构建了一种新型的超支状液晶核酸传感器用于检测p53突变基因. 本文突破传统构建超支状分子的方式, 采用杂交链式反应方法, 以目标序列p53突变基因作为引发剂, 3种不同的发卡探针Hairpin A, Hairpin B和Hairpin C为单体, 在温和的条件下, 通过改变单体的浓度和反应时间自发杂交组装形成尺寸和分子量可控的超支状DNA(branched-like DNA, bDNA). 借助捕获探针将该超支状DNA连接到液晶传感基底表面, 观察液晶分子取向改变前后的光学信号, 实现了p53基因含249密码子突变序列的快速检测. 本方法有望为核酸诊断的发展提供一种新的方法和思路.     

明日叶黄酮类化合物清除羟基自由基活性研究

为了研究明日叶黄酮类化合物对羟基自由基的清除作用,以明日叶（主要取叶片）为原料,用体积分数为65％乙醇提取明日叶总黄酮,测定其总黄酮含量.通过Fenton反应体系产生羟基自由基,利用明日叶提取液中的功能成分黄酮类化合物对羟基自由基的清除作用进行研究.结果表明：明日叶提取物总黄酮质量分数为10.18％,且黄酮类化合物对羟基自由基有较强清除效力,当提取物总黄酮浓度在0.1～1.0 mg/mL范围内,其与清除率呈正相关.明日叶中黄酮类化合物对羟基自由基有较强清除效力,作为天然抗氧化产品开发具有一定价值.