Split least‐squares finite element methods for non‐Fickian flow in porous media

In this article, we introduce two least‐squares finite element procedures for parabolic integro‐differential equations arising in the modeling of non‐Fickian flow in porous media. By selecting the least‐squares functional properly the presented procedure can be split into two independent subprocedures, one subprocedure is for the primitive unknown and the other is for the flux. The optimal order convergence analysis is established. Numerical examples are given to show the efficiency of the introduced schemes. © 2012 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2013     

铈基催化剂催化氧化燃煤烟气中汞的实验及机理研究

采用超声波增强的浸渍法合成了CeO₂-TiO₂催化剂,并采用BET,XRD,XPS等分析手段对催化剂进行了表征。利用固定床反应器,在模拟燃煤烟气条件下研究了CeO₂-TiO₂催化剂对单质汞的催化氧化行为及机理。结果表明:CeO₂-TiO₂催化剂在低温范围（150～250°）具有很强的催化氧化汞的能力;最佳的CeO₂/TiO₂质量比在1.5左右,此时汞的氧化效率可高达90%以上;P25,Evonik TiO₂比锐钛矿TiO₂更适合做铈基催化剂载体;CeO₂-TiO₂催化剂上汞的催化氧化符合Langmuir-Hinshelwood机理,即吸附态的汞与其邻近的活性物质反应生成氧化态汞。     

Synthesis of carbon nanotube—nanodiamond hierarchical nanostructures and their polyurea nanocomposites

Hierarchical carbon nanostructures (HCNs) comprising functionalized nanodiamond particles (ND) covalently bonded to carbon nanotubes (CNTs) through urea or ethylene diamine linkers were synthesized using wet chemistry technique. Atomic force microscopy, transmission electron spectroscopy, and scanning electron spectroscopy reveal the pearl-necklace-like morphology of new HCNs with up to 50% of the CNT surface decorated by ND particles. Nanocomposites fabricated using polyuria/polyurethane hybrid polymer matrix and 0.2 wt.% of HCNs as a reinforcing filler show a 64% increase in tensile and elongation strength at break relatively to neat polymer.     

Effects of the laser surface treatment on the mechanical properties of CuZr-based bulk metallic glasses

Surfaces of three types of CuZr-based bulk metallic glasses (BMGs) were modified by laser surface treatment (LST), and the influence of the treatment on structure and mechanical properties of these alloys was investigated. The phase structure of as-cast and laser-treated samples was characterized by XRD and the morphology of the alloys after fracture was examined by SEM. The compressive plasticity of treated Cu47.5Zr47.5Al5 and Cu46.5Zr47.5Al5Co1 BMGs can be improved from 0.5% to 2.0% and from 1.2% to 5.7% respectively compared with the as-cast ones, while (Cu0.55Zr0.40Al0.05)99Er1 BMG shows insignificant change of plasticity. The improvement in plasticity is attributed to induced crystallization of B2 CuZr phase in the treated surface zone of selected metallic glasses.     

Simulating ion clustering in potassium thiocyanate aqueous solutions with various ion-water models

Using a molecular dynamics simulation technique,we compared several commonly used ion-water models to describe the microscopic structures and dynamics in KSCN aqueous solutions.Results are compared with observations of femtosecond infrared vibrational-energy transfer and anisotropy measurements.The Jorgensen/TIP4P model is found to provide the best reproduction of clustering properties such as percentage of clustered ions,cluster-size distribution,concentration dependence of the water,and ion-rotation time constants.     

Two alternating direction implicit spectral methods for two-dimensional distributed-order differential equation

Numerical Algorithms - In this paper, two alternating direction implicit Galerkin-Legendre spectral methods for distributed-order differential equation in two-dimensional space are developed. It is...     

政府奖励对报废汽车回收模式选择的作用机制研究——基于企业社会责任视角

随着我国报废汽车数量的增多,由其造成的交通隐患、环境污染和资源浪费已成为重要社会问题,而如何设计合理可行的回收模式成为解决问题的关键。以制造商主导为前提,提出了基于企业社会责任的报废汽车回收模型,构建了制造商回收、销售商回收和第三方回收模式下的回收流程和数学模型,通过实例对考虑和不考虑企业社会责任两种情况下的回收模型进行了分析,探讨了不同政府奖励下报废汽车回收模式的策略选择。通过研究发现:(1)不论是否考虑企业社会责任,随着政府奖励的增加,制造商最终都会选择由自己进行回收;(2)当考虑企业社会责任时,政府奖励和决策者经济责任偏好都会导致决策的改变,随着政府奖励和赋予经济责任权重的同步增加,制造商的决策由第三方企业回收模式或销售商回收模式变成了制造商回收模式,表明政府奖励和企业社会责任对报废汽车回收模式选择具有显著影响。     

Supercritical superprocesses: Proper normalization and non-degenerate strong limit

Suppose that X = {X_t, t≥0; P_μ} is a supercritical superprocess in a locally compact separable metric space E. Let φ0 be a positive eigenfunction corresponding to the first eigenvalue λ_0 of the generator of the mean semigroup of X. Then Mt := e~(-λ_0t)〈φ0,X_t〉 is a positive martingale. Let M_∞ be the limit of M_t. It is known(see Liu et al.(2009)) that M_∞ is non-degenerate if and only if the L log L condition is satisfied. In this paper we are mainly interested in the case when the L log L condition is not satisfied. We prove that, under some conditions, there exist a positive function γ_t on [0,∞) and a non-degenerate random variable W such that for any finite nonzero Borel measure μ on E,lim/t→∞γ_t〈φ0,X_t〉=W, a.s.-P_μ~.We also give the almost sure limit of γ_t〈f, X_t〉for a class of general test functions f.