超临界流体中制备微孔和介孔结构金属有机框架负载Ru及其催化性能

以柠檬酸为螯合剂,十六烷基三甲基溴化胺为表面活性剂,通过ZrOCl2·8H2O 与对苯二甲酸 (H2BDC) 反应制备了同时具有微孔和介孔结构的Zr基金属有机骨架材料(Zr-MOF),并在超临界CO2-甲醇流体中将 Ru 负载于 Zr-MOF 上, 制备了 Ru@Zr-MOF催化剂,采用傅里叶变换红外光谱、X射线粉末衍射、透射电子显微镜、热重分析、N2吸附-脱附、X射线光电子能谱和电感耦合等离子体发射光谱对催化剂进行了表征,研究了该催化剂在苯及其同系物加氢反应中的催化性能. 结果表明,Ru纳米金属颗粒均匀地分散在Zr-MOF载体上,平均粒径约为2.3nm,在苯及其同系物的加氢反应中表现出很高的催化活性和稳定性.     

碳-硅复合介孔磺酸催化剂的制备及其在缩醛(酮)反应中的应用

采用浸渍法将糠醇负载在铝改性的SBA-15介孔孔道中,经550℃不完全碳化制备了结构规整、含多苯环的中空管状硅碳复合介孔材料.结果表明,通过温和磺酸化作用可使磺酸基团成功取代在多苯环上,其酸量随着多苯环涂层厚度变化在0.38~0.84 mmol/g范围内可控调变.相比于蔗糖作为糖源的复合固体酸,所制碳多苯环-硅酸催化剂具有中空碳纳米管堆积的类似CMK-5介孔结构,以及较大的反应空间、稳定的机械性能、较高的比表面和大量可以接触的质子酸中心,因而在大分子缩醛(酮)反应中表现了良好的催化性能.     

A Trinuclear Ni(Ⅱ) Mixed-ligand Complex Containing Pentadentate N-butylsalicylhydrazide and Monodentate Imidazole:Synthesis, Characterization and Crystal Structure

A novel trinuclear nickel(Ⅱ) complex [Ni3(bushz)2(Himdz)2(H2O)2]?2DMF (1, bushz=N-butylsalicylhydrazide, Himdz=imidazole, DMF=N,N-dimethyl-formamide) has been synthesized and characterized by X-ray single-crystal diffraction characterization. Complex 1 crystallizes in the monoclinic system, space group P21/c with a=7.706(7), b=14.882(6), c=18.639(6) , β=108.08(2)o, V=2032(1) 3, Dc=1.525 g/cm3, Mr=932.95, Z=2, F(000)=972, μ=1.442 mm-1, the final R=0.0359 and wR=0.0771. The three nickel(Ⅱ) atoms in 1 are arranged in a strictly linear structure and exhibit alternating square-planar and octahedral geometries. The complex is connected to form a supramolecule with an infinite three-dimensional network through intermolecular hydrogen bonds. The electrochemical studies reveal that redox of Ni3+/Ni2+ in the complex is a quasi-reversible process. The thermal stability of the title complex was also studied.     

Syntheses and Crystal Structures of Two New Macrocyclic Compounds

Two new macrocyclic compounds, [Cu2(L)2](ClO4)4·2CH3OH (1) and [Cu(L)](ClO4)2·2H2O (2) (L = 1,3,10,12,15,18-hexaazatetracyclodocosane) were synthesized by condensation reactions involving amines and formaldehyde in the presence of copper anion. Compound 1 crystallizes in triclinic, space group Pí with a = 10.442(2), b = 14.197(3), c = 17.388(4), α = 91.218(4), β = 90.69(3), γ = 93.756(4)o, V = 2520.4(9)3, Z = 2, F(000) = 1260, Dc = 1.589 Mg/m3, Mr = 1205.92, μ = 1.137 mm-1, λ = 0.71073, the final R = 0.0668 and wR = 0.1573 for 9703 observed reflections with I > 2σ(I). Compound 2 crystallizes in monoclinic, space group C2/c with a = 16.911(2), b = 11.4172(15), c = 27.059(4), β = 107.787(2)o, V = 4974.7(12)3, Z = 8, F(000) = 2504, Dc = 1.610 Mg/m3, Mr = 602.92, μ = 1.155 mm-1, λ = 0.71073 , the final R = 0.0419 and wR = 0.1131 for 4374 observed reflections with I > 2σ(I).     

Effect of Plasma Treatment on the Structures and Properties of Konjac Glucomannan Film

To understand the effect of plasma treatment on the Konjac glucomannan film, the nitrogen plasma was injected into the film by ion beam injection machine in this study. The structures and properties of Konjac glucomannan film after plasma treatment were analyzed by Infrared spectroscopy, Raman spectrum, X-ray, ect. The result showed that nitrogen groups appeared in the KGM molecular chain and part of this chain fractured, and the number of hydrogen bonds increased after the treatment of plasma. The form of KGM molecule remained amorphous non-crystalline state, but the crystalline region was increased and became more ordered. The mechanical property of tensile strength and breaking elongation was improved, while the WVP was decreased. The nitrogen groups were grafted on the KGM molecular chain after plasma treatment, which led to the improvement of the properties of KGM film.     

Effect of Precursor Drying Process on the Properties of LiFePO4/C Composite with Low Carbon Content

<正>Properties of two LiFePO_4/C composites with low carbon content synthesized from precursors dried by spray drying and blast drying are investigated by scanning electron microscopy, X-ray diffraction, Raman spectroscopy and electrochemical measurements. The two samples have a different morphology and particle size, while the structure of LiFePO_4 is unaffected. The LiFePO_4/C composite prepared from the precursor dried by blast drying has a much lower surface resistance and a much better rate capability because the deposited carbon is more graphite-like and more conductive. The cycling performance is also much better for the LiFePO_4/C composite prepared from the precursor dried by blast drying because only a slight impedance growth is involved upon cycling. These results suggest that the precursor drying process has a significant impact on the properties of LiFePO_4/C composite, and its effect is highly dependent on the carbon content.     

拉曼光谱法定量分析焦磷酸根离子的含量

应用拉曼光谱技术研究了焦磷酸钾、硝酸钾、磷酸二氢钾、乙二胺四乙酸钠等十余种可溶性盐水溶液以及它们的混合物溶液的拉曼光谱特征,考察了共存组分对焦磷酸根拉曼光谱特征峰的影响;建立了基于拉曼光谱技术定量分析溶液中焦磷酸根离子含量的方法。结果表明,以硝酸钾为内标物,保持被测溶液pH 11,焦磷酸根离子拉曼光谱特征峰强度与硝酸根离子拉曼光谱特征峰强度之比值对焦磷酸根浓度呈良好的线性关系,所得线性回归方程为y=1.2110x+0.1515,相关系数R2=0.9996;已经研究过的十余种可溶性盐共存物几乎不干扰焦磷酸根离子的定量分析。     

凝胶渗透净化/液相色谱串联质谱法测定动物源肝脏中4种β-激动剂的残留量

采用凝胶渗透净化技术,建立了用高效液相色谱串联质谱法同时测定动物源肝脏中克伦特罗、沙丁胺醇、莱克多巴胺、特步它林残留量的方法。样品经β-葡萄糖苷酸酶水解后,用乙酸铵溶液提取,MCX固相萃取柱和全自动凝胶渗透净化色谱仪净化,采用选择离子监控模式(SIM)检测,内标法定量。克伦特罗在0.1～10 ng/mL、莱克多巴胺、沙丁胺醇、特布他林在1～100 ng/mL质量浓度范围内呈良好的线性关系,相关系数(r2)均大于0.999;方法的检出限和定量限分别在0.003～0.02μg/kg和0.009～0.06μg/kg之间,方法的回收率为94.7%～106.1%,相对标准偏差小于7.8%。适用于动物肝脏中克伦特罗、沙丁胺醇、莱克多巴胺、特步它林的确认和定量检测。     

高精密恒电流库仑法测定CCQM-K73国际关键比对盐酸溶液中H+含量

采用高精密恒电流库仑法测量了CCQM-K73国际比对样品盐酸溶液含量。该方法是国际上公认的基准测量方法,根据法拉第电解定律,通过质量、电阻、电动势、时间等基本物理量及法拉第常数来进行样品的测定,直接溯源到国际SI单位,不需要用标准物质进行比对。中国计量科学研究院作为国家化学计量最高溯源,参加了该项关键比对,并取得了等效一致的好成绩。     

基于氧化石墨烯识别特定双螺旋DNA

依据三螺旋DNA的形成,以氧化石墨烯为基础建立了一种识别特定序列双螺旋DNA的方法。单链探针DNA能够通过静电引力作用吸附在氧化石墨烯表面,标记在单链DNA末端的荧光探针分子TAMRA由于荧光能量共振转移作用使得其荧光发生淬灭。加入目标双螺旋DNA后,单链探针DNA与目标DNA分子形成三螺旋DNA,探针DNA从氧化石墨烯表面脱附,标记在探针DNA上的荧光分子的荧光恢复。在最佳实验条件下,荧光恢复的强度与探针DNA的浓度在20.0～300.0 nmol/L具有良好的线性关系,检出限为16.9 nmol/L。该方法在DNA药物筛选及基因疾病的诊断方面具有一定的应用前景。